Calendar not synchronized since the upgrade to El Capitan

Similar Questions

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• Cannot receive mail entering IMAP since the upgrade to El Capitan. Help

  I was not able to receive mail from the IMAP account since the upgrade to El capitan. What have I done wrong? Grateful for any help.

  The first port of call would be connection doctor in Mail.app (Mail.app-> Windows-> connection doctor).

  It will check each connection e-mail and report any problems. From there, you can work on what actions need to be taken (after the results, if it still has not clearly).

• Since the upgrade to El Capitan, I can't add printers!

  Since the upgrade to El Capitan, I can't add all the printers on my Mac. I have a MacBook Pro. I deleted my printer list and restarted my computer. I have reset my system print and restarted my computer. Whenever I have to add the correct IP address to my tab "add a printer", I get the same notification:

  If I type 'continue', the rest in the queue and automatically default print job is "suspended." Everyone at the office (PC and Mac users) do not have all the adding problems or printing to the same printer with the same IP address.

  This was never a problem until I had updated the operating system of El Capitan. Help, please!

  Use ppd installers for v 10.11 2.2.0.0 manufacturer.

  http://support.Ricoh.com/BB/HTML/dr_ut_e/re/model/MP60/mp60en.htm#Mac%20OS%20X%2 010.11%20(OS%20X%20El%20Capitan)

• A lot of cookies since the upgrade to El Capitan

  With the Mountain Lion, I'd end up usually with 15 to 20 cookies.  Since the upgrade to El Capitan, and using the same sites, I find myself with cookies from 80-90.  The cookie setting is "allow Web sites I visit."  I was wondering if I need to change something or if I missed a setting.  (I've been clear all cookies after each session.)

  You always have the same "ad blocker" installed

  extension or add-ons?

  I'm afraid that this is the best you can do. Or turn off all cookies

• Details option is no longer appears in the window of security since the upgrade to El Capitan. Is there a way to selectively remove cookies and plugins?

  Since the upgrade to El Capitan, is no longer the details option appears in the Security window in safari preferences. Is there a way to selectively delete cookies and plugins, without deleting them all?

  Select the Privacy tab and click on details...

  

  Plug-ins can be managed in the Security tab, selecting the plugin settings...

  

• Mac has been freezing since the upgrade to El Capitan

  My mac froze just (since the upgrade to El Capitan) still today while on the internet. Has written on this subject before and submitted to the reading of the Console application, but there was no response.

  Message on the console of today reads:

  In the menu of Queries/All Messages to the system log:

  29/03/16 12:10:13.234 PM ReportCrash [7149]: call to spindump for pid = 7118 wakeups_rate = 155 duration = 291 because of excessive Awakenings

  The diagnosis and use of Messages:

  29/03/16 12:10:14.222 PM spindump [668]: com.apple.message.domain: com.apple.crashreporter.writereport.wakeups_resource.diag

  com Apple.message.signature: com.apple.WebKit.Plugin.64

  com Apple.message.signature2: UNBUNDLED | 11601 (11601.5.17.1) ((null))

  com Apple.message.signature3: alarm clocks

  com Apple.message.Result: noop

  com Apple.message.summarize: YES

  SenderMachUUID: 63E4F244-A146-3809-8016-6172E1C11CB1

  Any help would be most appreciated.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• Since the upgrade to el capitan I can stream netflix

  Since the upgrade to el capitan I can stream netflix

  What happens when you try?

  Have you tried another browser?

  have you went to the support site for Netflix?

• My white disc light WD external network is no longer visible in the Finder since the upgrade to El Capitan, drive always is accessible from the Windows PC network.

  Problem is roughly according to the title. I had a white WD external light of diving for quite awhile now and I currently plugged it on the same network switch as my iMac, and the printer. Since the upgrade to the latest version (pretty sure it's) El Capitan I see is no longer the drive in Finder. There is an old Windows PC that is connected to another network down switch and who can access the drive of property. I have reset the drive and the iMac and replaced the local network cable.

  I have some technical knowledge, but I'm not a COMPUTER guru.

  Ch6tty

  Can connect you via CMD-K (to connect to the server) and type the IP address / name of the network-share?

• Since the upgrade to El Capitan, my Mac is VERY slow.

  I just have to upgrade Yosemite El Capitan.  Since the upgrade, my Mac is VERY slow.  Spend a lot of time with the spinning beach ball, and slow to change application.

  Why?  What should do?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• 3D photo restores do not properly since the upgrade

  I developed an application in labview 2012 and have recently updated until 2014.

  Since this upgrade, I have a problem with my 3d image rendered incorrectly.

  I am attaching the images as it is difficult to describe the problem. There should be 4 of robot arm placed on the corners of a gray box that is placed slightly above the ground. The image with the removed soil that shows the best, but it is obviously incorrect. Remove objects and textures can give better results in some respects, but the question is always present whenever I changed something.

  It seems that parts of models are not rendered or sections are not rendered in the correct order, but I'm not aware of all the properties change this.

  I tried to change the clip plain but documentation is very limited and I doubt that's the problem anyway as the middle of the image which is incorrect, the floor and the ends of the robots never seem to cut.

  I am running Labview Robotics 2014 and using the Robotics Toolbox to generate arms on Windows 7 64 bit with nvidea GeForce GTX 760 graphics card.

  Any help is appreciated.

  Thank you

  Nick

  I experienced similar problems with the rendering window. I feel quite informal and subjective, it is that the render window is something that NEITHER is not updated with the latest improvements in graphics cards, and having developers use real 3D image controls instead.

  I experimentally tested the 3D picture control and I can't see any advantage of the render window of performance compared to the 3D so image my, yet unofficial, impression is that image 3D controls are hardware accelerated now but it is not clearly stated in the documentation for LabVIEW.

  You can put a window on a façade of VI 3D and select in the context menu 'Fit control component' and create a window similar to the rendering window. It requires a little more programming, but you get a lot more flexibility for your application.

  If you are interested, join the Group Vision 3D!

• Since the upgrade to El Capitan my automatic backups on my Apple Time capsule do not work

  Everything worked fine until I upgraded to El Capitan... now I don't have enough space for back ups on my time capsule (1 TB is) and a couple of years.

  What can I do simple?

  Thank you

  You have 3 options.  Ranked in order of the most expensive on the down...

  (1) add a new time Capsule and start backups goes to this device. It is also the easiest option.

  (2) add a USB hard drive to the existing time Capsule and start going that animate the backups. Next best option in terms of simplicity

  (3) delete the existing and any time Capsule hard drive start over with new backups. Not too difficult, if you're good by following the instructions

• 8600: scan Premium OfficeJet Pro 8600 does not work since the upgrade of Mac to 10.10.1 (Yosemite)

  Since the update of my MacBook Pro in Yosemite, I can't function of the computer analysis to work. I downloaded again the softwear & reinstalled; reset the printer, repaired disk permissions, etc. nothing works. I also note that the HP Utility icon no longer appears.  Print and copy work very well. Any suggestions?

  I tried everything above. When I add the printer driver printer HP (instead of AirPrint) does not show as an option (even if I can find it in my downloads folder). Option is the HP DeskJet that comes with a warning that it cannot be the right driver. Also downloaded what seems to be the right driver on the HP site. He also appeared in my downloads folder. HP utility always not available.

• Hearing 5.5 does not work since the upgrade to Windows 10?

  Hearing of the charges u, and I need to work with the files load in the software too. But nothing else happens. It won't play, won't record, regardless of whether the file is passed to in the menu, a sequence of keys, or a button on the screen. I have re-installed the software: no change. I have uninstalled and reinstalled again: nothing.

  Help, please?

  Elegantly yours.

  Tom Fitzmorris

  [(informations personnelles par Email signatures et deles de renseignements personnels)-mod]

  I heard about 5.5 on Windows 10.

  The first thing I would check is that Windows and hearing are "accepting" on the audio interface (and pilots) to use and also things like rates and few sample depth.  We had a poster with CS6 yesterday who had a similar problem and going through and manually configure the interface card / audio itself sorted.  The upgrade to win 10 to reset everything, probably for video playback, at the expense of the audio recording.

  Your do not mention that you use as a sound card, so I can't be precise in what to do, but the first thing I would do is go to Windows Audio Control Panel and make sure that any sound card that you want to use is visible and selected by default for the recording and playback...  While in the audio control, also access advanced settings (recording and playback and make sure that the depth of rate and little run the settings you want.)

  If you have a card with its own software external sound, go there and set it up to match Windows.

  Finally, go to Edit/Preferences/Audio Hardware and make sure that the right device is set for recording and playback on the drop down menus.  Also, make sure that the "device class" is set to the right kind of driver for the audio interface you.  This will probably be Ms for an integrated sound card or to an external ASIO - but you'll have to work it yourself.  Apply all these changes, so I hope that things work out.

  If this is not the case, let us know the details of your system and the audio interface and maybe we can come up with other ideas.

• I constantly receive the death spinning beach ball by adding or modifying contacts since the upgrade to El Capitan.

  I did a bit of investigation on it. Here are the facts:

  (1) I use Apple Contacts.app to synchronize with Google contacts.

  (2) I have two computers, a MacBook Air 2013 and an iMac late 2012, the two 10.11.2 running. With respect to the mail, contacts, calendar, etc., they are configured identically.

  (3) I had this problem (among others) for the upgrade on my iMac 2012, so I did a clean install of 10.11.

  (4) this problem occurs ONLY on the iMac (again, same configuration on both machines).

  (5) I removed the plist and all other data in/application Support and restarted several times related to the contacts.app. No dice.

  (6) I repaired disk permissions. No dice.

  Review of the console, this is the error message (followed by multiple attempts failed in the same process)

  25/01/16 2:34:34.000 PM kernel [0]: sandbox: com.apple.Addres (564) deny (1) / private/var/run/mDNSResponder network-outgoing

  My best guess that sandboxing OS x system is denied access to the demon DNS resolver by com.apple.AddressBook service, seeking to talk with Google at any time any changes.

  So here's my question: anyone know how I can ask the system to sandbox of chill out on these queries and continues to deny access to the network? Is there a text file somewhere that I can change to provide permissions for com.apple.AddressBook?

  And also, is it not funky how he's just on a single computer, both with the same configuration in system preferences?

  PS - No firewall is enabled on each machine.