Calibrate Image - dialogue

Similar Questions

• Vision Inspection Builder 3.6 calibrate Image does not work

  I use a camera, NI 1722, with the Vision Builder AI 3.6 software to read 2D data matrix code.

  Unfortunatlly the camera can be mounted directly on the code, its at an angle of about 20 °.

  The step of "Reading data matrix Code" works very well, however we don't always not the classification "nonuniformity Axial.

  I want to calibrate the image to adjust the view. To do this, I find the 4 edges of my matrix Code, then 4 intersections of the edges (ie the corners)

  I know that my matrix code is a square 9x9mm. So, I use the Image step calibrate to account for this.

  It works very well in "Setup" Mode, when I run individual State.

  However when I run the Inspection, step to calibrate Image still fails and is not calibrate the image.

  Please find enclosed pictures of file and the example of the vbai.

  After trying many different things, I later upgraded to VB AI 2009 SP1

  Yet once after many different configuration etc, I finally solved the problem.

  (1) with VB AI 2009, if you apply calibtation to a step to acquire images, it will always fail!

  I don't know why this option is there (maybe it works with different cameras)

  (2) you must use "Select an Image" step between steps acquire Image and the Image calibrate.

  Calibrate the Image does not seem to use the last Image acquired in the State

• VBAI 2012 "save the image calibrated to the file" issue

  Hello

  Under the State of 'Calibrate Image', 'Save the image calibrated to the file' option does not work correctly.

  With the exception of the type 'Point of Distance' of the calibration, the new image is ever recorded. I checked the calibration image .cal2 in the folder \ProgramData\National Instruments\Vision AI\Calibration Builder, each iteration the meta-data are updated but not the image.

  I have a camera calibrated with a grid (see picture) and using the model of the distortion. Working remotely can sometimes change and I need to take a recalibration. This step should be as simple as possible. Example: put a model calibration in the field of view, then press a button recalibrate.

  The problem mentioned above, it is impossible. Whenever I have to manually go into the choice of the State of the Image calibrate and update the calibration image myself. Otherwise, calibration is recalculated from the original image which is not best suited for the new working distance.

  Is there an easy way to make VBAI save a new image of calibration with each iteration?

  Or is it something that I did not understand this option 'save image calibrated to the file?

  Vision Builder for Automated Inspection VBAI 2012

  Windows 7 64 bit

  Best,

  Ken

  Hi Larpin,

  Unfortunately VBAI does not support the suggested behavior. The best solution in my opinion would be to implement your application completely in LabVIEW!

  To Eval download link. Version:

  https://lumen.NI.com/nicif/en/evallv/content.XHTML

  Kind regards

  MISIC

• Cannot find images moved by LR CC

  LR CC 2015.1.1 Release, iMac, OS X 10.10.4

  I spend all my images of an old external drive (Seagate) to a new (WD green RAID).   The problem is that LR is unable to find the new disk images when pointing in "LR find missing image dialogue."  Try again this seems to eliminate images in the LR catalog even if the images are still physically on the disc.

  Here are the steps I followed:

  (1) I copied the folder with the images on the new external drive and then eject the disc of moose.

  (2) I then open LR, pick a picture that was in the catalog and LR I want to find the missing image.

  (3) in the Finder, I clicked on the image in the new player: not only does LR not locate the image and the other in the same folder of date with her, but the other images in this folder, in which it is located are disappearing in the catalog.  In the Finder, the images are present where they should be.

  If I connect the original disc, LR finds the images in the original drive, but images that has disappeared from the catalog are still not present.

  Another detail: these new discs are in a double compartment in a RAID array, acting as a single driver.  I don't think that this is important for the problem, but of course I want to talk about any detail that may be involved.

  I also just closed, did a restart and repeated this process once.

  Any help would be greatly appreciated.;

  Bob

  LR knows the difference between the files being moved and individual photos that is displaced. In this case, you need to 'find' the files moved to the folders Panel to find individual photos.

  If your files Panel does not show you the tree of folders as the fact finder, right-click on the background files and select "show parent". Repeat if necessary.

  Do the 'find' on the highest or the files that you moved. Then everything under / them should be managed automatically.

• GIF/save for Web problem (PSE 7)

  I tried searching for an answer to this problem, but nothing seems to fix everything that happens.

  Recently, I had to replace my laptop and from Windows XP to Windows 7.  I transferred the PSE 7 from the old system to the new system and have had no problems with it - until now.  I have an image in format Photoshop 52 - layer I want to save as an animated .gif, with each layer as a different image.  File > > Save As has the ability to save layers as frames, but if I check it, then click on 'Save', nothing happens.  Nothing at all.  On my old system, I would get a new dialogue with options like the quality, duration by frame, loop, etc., but that doesn't happen any more, and there is nothing to save (if I'm going to find the new .gif file, it's just not there). If I do not choose "Layers in images", dialogue .gif does so very well and it has no difficulty to save it as a static .gif file.  But it seems that she won't just save it in animated format.

  I'm having the same problem with "save for Web".  Or the option of the file menu or typing command will bring up dialogue to let me record this way.  He thinks maybe a second, but does nothing else and does not record the image.

  I tried to reset the layout, just in case the dialog box has been moved somewhere that I wasn't just to see and I tried to reset the preferences to save it for the Web, but none of these things worked.  No explanation as to why a .gif animation 'layers as images"is the only format that is not saving correctly?

  I also tried old connections animated that I created with XP, and they will not re - save as animation connections either opening.  I get her "do you want to save changes" dialogue, but clicking on 'Yes' does nothing and does not record updates.  I am at a total loss for why this feature no longer works.

  If you right click on the shortcut of items and choose Run as administrator,

  It does make a difference or not save for Web work?

  Registration of the Web dialogue box is the same dialog box that you would get when checking the layers as frames

  in the Save as dialog box.

  MTSTUNER

• Silly question base - making a circle with transparent bg makes me crazy!

  Okay, disclaimer clause - I have been using an older version of elements and just upgraded to Photoshop CS5 Extended.  All I want to do is:

  (1) create a circle of a logo.

  (2) add text and shadow.

  (3) make transparent bg.

  Why am I the white line around the circle?  (The circle will be the logo.  Now it is a 240 x 240 gif is floating above the header using CSS).

  Thank you

  Gary

  

  In addition to advice for Christmas, there is no need to rasterize the shape layer

  to change the color, simply double-click on the solid fill color to change the color

  of your circle. Also move your shape above the white layer Layer and turn it off

  visibility or remove the white background layer before you save it as a png-24 format.

  You can also try Image > Trim to crop circle. Choose the transparent pixels

  Image > dialogue Trim.

  

  

  

  MTSTUNER

  Post edited by: MTSTUNER

• Preview image in the dialogue window open (Photoshop CS6)

  Hello

  We had an opportunity to see the preview of the images in the dialog open Photoshop CS5 file, but in the new version of CS6 there is not this possibility. Should I forget about this option and use the Mini Bridge?

  Just for clarity:

  What we're talking about being absent from Photoshop CS6 is the preview at the bottom of the dialog box that was there in Photoshop CS5 and earlier versions:

  

  That's what you see now with Photoshop CS6:

  

  They are two operating system dialog boxes.  It's just that Adobe has completed dialog box to add additional features found in Photoshop CS5 and previous dialog boxes and which has been deleted for some unknown reason.  Note that they have NOT removed all breast augmentation - this little box of sequence of images [] is not provided by Windows.

  -Christmas

  [MODERATOR] Mark this message as correct because it perfectly illustrates the problem. This topic is discussed further here: Photoshop: no preview of the image on the open dialog box in CS6

  Post edited by: Brett N

• I get 40 some dialogue boxes, declaring - bad .exe image. Those that must all be liquidated to continue starting. How is - a problem.

  As the Insider Office, these boxes pop up on each other until you to close all out.
  Why this is happening and how to fix this.

  Hello

  Use a tool like autoruns (http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx) or Hijackthis (http://download.cnet.com/Trend-Micro-HijackThis/3000-8022_4-10227353.html) to see what is loads at startup and remove unwanted entries. I imagine that you are probably see is the result of your antivirus software or antispyware remove unwanted nasties, but does not remove the entries of their charge. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to calibrate an external display for macOS Sierra?

  Hi guys,.

  seems that on my Macbook Pro after the update everything is strong and displayed correctly.

  However, on the external monitor, a 24 "AOC who was as crisp and sharp as the laptop (kind of I know) the images and the text seems to be well screwed. two attached photos to see the differences between the screens - even cannot correctly read the external monitor

  any ideas on how to solve this problem? or is irreparable? I tried to calibrate the monitor, used the old calibration profiles, etc. looks like illegible

  Thanks in advance

  Hello justme12,
  Thank you for using communities of Apple Support.

  If I understand your post that the quality of the image on the external monitor is as clear and crisp as it used to be. I understand wanting to the external monitor to be as clear as possible. I recommend using the steps in this article to help resolve this problem:

  Get help with graphical problems on external displays connected to your Mac.

  Best regards.

• Rename images that I download ("Save as" dialog box)?

  Is it possible to download an image in Firefox for Android and rename it immediately?

  I'm a lot of webcomics on a regular basis and save favourite pages, i.e. the images. In order to be able to organize these images of comic book later, I need the ability to rename files. Switching in the download to rename for each file but directory would be very invasive for webcomic reading, so I need a dialog box "Save as" style.

  Dolphin provides such a dialogue by choosing 'Save Image', but I prefer to use firefox for synchronization features.

  There are no plans for this Interface on Firefox for Android. Could be a good extension, however.

• Post images of the inhibition of the iPhone

  I imported 150 clips from my iPhone, started publishing and an hour or so later disconnected the iPhone. This has created the "Missing Camera" dialogue. I realized that FCPX had not finished importing clips, so I reconnected it the camera. After awhile clips showed no "Missing Camera" so I tried to publish my video on Vimeo, that's when I get the dialogue "not shareable element while it is still a reference multimedia on the camera.

  I try re-import images, nothing happens.

  I try to rebind the images (I have reuploaded the images to another folder), there is no evidence that missing.

  So now I'm stuck in limbo, Earth where I can't connect publish my video, and I can't connect to the media. Help, please!

  rollowenlock wrote:

  I try re-import images, nothing happens.

  Have you used the reimportation of order Camera.Archive?

  Russ

• HP MFP M277 dw: scanned image is not horizontal

  Hello

  I have problems with scanning.

  The scanned image is not right, not horizontal, the image / lines slightly tilting. The right of a line that is slightly below the line on the left. Looks like the book was a little twisted, but it's not. The left and right margins are straight and vertical, but the lines is tilted slightly.

  This occurs regardless whether I put the paper on the glass or using the paper feeder.

  My MFP is almost new, and this problem has happened all the time.

  / Paul

  @Paul_Sund

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you have not already done so, try setting "Calibrate" to help improve performance.

  The User Guideexplains the procedure on Page 121

  Calibrate the product in order to harmonize colors
  Calibration is a function of product that optimizes print quality.
  Follow these steps to solve the problems of quality of printing such as misaligned color, shadows, fuzzy graphics or other color print quality problems.
  1. on the product control panel, press the Setup button.

  2. open the following menus:
  ● System Configuration
  ● print quality
  Color calibration ●
  ● Calibrate now

  3. a calibration message appears on the control panel of the product. The calibration process takes a few minutes to complete. Do not turn off the product until the end of the calibration process.

  4 wait until the product is calibrated and then try to print again.

  

  If nothing helps, I suggest that you contact HP Support.

  Explain the problem and ask for options / help.

  HP Contact Information - sales, Technical Support, other Contacts - USA / Canada

  Fill out the form to receive the case number and Contact information

  Contact HP support - USA-

  Contact HP - including UK information

  HP technical support / Service delivery - some English Speaking countries

  HP global support

  Warranty check

  HP customer support - product warranty check

  Plans of optional guarantees:

  Enter your product number in the screen to view the different warranty plans available for this system:

  Care Pack Central

  Definitions (file may be slow to load in Firefox - Edge is faster...):

  Definitions of Care Pack Services

  HP Services to consumers (Service purchase information)

  1-866-724-8600

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Cant' access to images in Photos to download on another site.

  Whenever I have try and upload a photo on another site, all I see in the finder is the file Photos and pictures not individual. All the photos I have in the fine display images, but I can't access the photos in my pictures folder individually.

  The Finder does not show the photos in the photo library.

  But a dialogue window "file > open" will show you the contents of the photo library, if you use the 'Media' in the sidebar section in the file selector Panel.

  When you want to open a file for download scroll down in the selector Panel of the file until you see 'Media' and click on the camera icon.

  

• acquisition of mirror images?

  Hello!

  I just started using a CMOS of Edmund Optics camera (sensor monochrome 1/2 "EO - 1312 m) in a project, so that until now, I used a Logitech Web camera. I had no problems like this before that I presented the new camera.

  The thing that happens is that, quite randomly, the acquired image appears mirrored onscreen. What would make the rest of my unnecessary imaging, since I then calibrate and use the pattern on a mirror image match.

  I have urgent need to know what is the cause!

  Right now I use the functions of the IMAQ Directshow drivers to acquire the image, but there is a LabView package included with the camera. Maybe that has better control the acquisition process?

  Any input is greatly appreciated!

  I got it!

  In the registry under HKEY_CURRENT_USER\Software\IDS\uEye\DirectShow\Device1\Settings\UI154xSE-M\ImageSize Editor, there is a value defined for the orientation of the image. I think it's to control the above setting in the Directshow driver. I'm not sure what's causing the unexpected behavior at random this value, but I can simply put the value in my VI in LabView that I know that the image is acquired correctly every time. Problem solved, as far as I'm concerned.

  Thanks for the input :-)

• Image - Photo method - the executable export LV Crash - coolish 0x786DE250 in drawmgr.cpp

  Hey guys,.

  I have a crash appear in my application when you try to export an image to the Clipboard to be pasted to my Word document. The accident happens to export Image invoke node, but occurs only in the executable , and occurs on the 102nd iteration. If I run the executable with 101 iterations, that's fine. If I run with 50 iterations, then run it again to 52 iterations without closing the executable, it crashes.

  Executable code, dialogue crash excerpt, below. Any of you have any suggestions or ideas to workaround? Is it something I could change me executable build settings to correct this?

  To run the code, you can change all the settings, and then click Go to run the iterations.

  Thanks for the help!

  

  

  Have you tried another image format, other than the EMF?