How to configure a button with alignment fixed points on a logorithmic scale?

Similar Questions

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• How to create a button with rollover that appears in a different place than the button when you move?

  Hello

  How to create a button with rollover that appears in a different place than the button when you move by using only the Muse (reversal may be a different shape and color of the button). I managed to do it using Photoshop and the separate layers and import it, but it is not a good solution. All suggestions will be welcome.

  Thank you

  You can try to use the widget of the Composition of the ToolTip. In this way, the trigger area is isolated and a "State of reversal" can be placed anywhere on the screen (compared to the trigger).

  • Remove the two triggers additional default
  • Set to display the targets on working capital
  • Select hide all initially.

• How to extend the button with a shadow?

  I had never used Photoshop. I found a beautiful button: http://www.psdchest.com/2011/05/09/web-elements/ and I would like to Customize so that it includes the words driver or passenger. What are the tools I should to use and in what order to extend the button with Shadow and perhaps also to reduce the angle of rupture? I can for only change the text . Link psd file I mean the Group-> light-> switch 1 on.

  So far, it looks good.

  For the choice of bevel (hold down Apple key to select multiple layers at the same time) track of the layers and re - adapt (Edit/transform/Scale) to give it less deep. I suggest grabbing the right conner down and moving upward and to the left, you'll see what I mean.

  Form 3 copy 10

  Form 3 copy 4

  Copy of the form 2

  After that, you will see the layer from below black. You must re - this scale itself to achieve the effect. Its file name is: form 3 copy 3.

  I'd love to see how it comes out.

• How to configure Oracle Discoverer with EBS R12?

  Dear
  
  I hope that, by default, only oracle Discoverer is not configured with EBS R 12. How to configure?
  Any help, much appreciated.

  Naya,

  Please refer to the next note, it should be useful:

  Note: 373634.1 - using discoverer 10.1.2 with Oracle E-Business Suite Release 12
  https://MetaLink.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=373634.1

• How to configure the listener with SSL

  Hi Experts,

  I use 11g R2 EE. I want to configure my database listener so that it can be connected using SSL.

  Can someone provide me guide step by step to configure the listener with SSL (including the portfolio so that comes in the image).

  The command line configurations will be well appreciated.

  Thanks in advance

  Alexander gelin

  The client configuration is the same as the server:

  1. create the portfolio.

  2 creating CSR and copy it in CA.

  3. the CSR signal with your certificate root.

  4 copy signed CRT file and root of public certificate to the client.

  5 configure the sqlnet.ora clients.

  Heavy customers already contains the necessary files. For thin clients, it is necessary to install the full or instant client.

  In SQLDeveloper, connection string should be like:

  jdbc:oracle:oci:@(DESCRIPTION= (ADDRESS_LIST= (ADDRESS= (PROTOCOL=TCPS)(HOST=)(PORT=))) (CONNECT_DATA= (SERVICE_NAME=)) (SECURITY= (MY_WALLET_DIRECTORY=D:\Oracle\client.test.p12)))

• How to configure vCenter Server with an external smtp server?

  Is it possible to configure vCentere Server with an external smtp server?

  In our environment, we must configure vCenter server to send email alerts when the alarms are triggered. We use the google apps (smtp.gmail.com) server as our official email server.

  I know the steps to do the same?

  You must authenticate external messages. Here is one of this tutorial. http://paulgrevink.WordPress.com/2011/02/06/configuring-vCenter-for-email-with-SMTP-authentication/

• How to add a button with Javascript library

  Hello

  I am using Captivate 5.5 to create a template.

  In the files that will be created by using this template, we will add a button that executes a Javascript script. Now my question is, given that this button will be used across multiple slides in the file, I can add this button (with the Javascript code) to the library? We currently create manually everytime.

  We do not have a programmer on our team, so that we cannot create the widget. Is there another way?

  Thanks for your help.

  Anthony

  Why do you need to remove the slide?

  I have a white blank slide at the beginning of all my modules of Captivate. There are some issues that appear to be avoided if the first slide has nothing about it.  You don't have to do this very long slide.  Usually mine are just a second, in the long term.

• How to configure jdeveloper 11 with the .dbc files?

  Hi all
  
  I am a new bie here. 4 jdeveloper 10, I can configure files .dbc to the setting of the project, while 4 jdeveloper 11, it's totally different. I can't find any place to set it up. How to configure the .dbc in jdeveloper 11?
  
  Kind regards
  Chelsea

  You cannot use jdev 11g for the development of the OFA...
  You must download the patch of jdeveloper on metalink to develop objects of the OFA.

  See this metalink note to find the correct version of jdeveloper, you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1

  Prasanna-

• How to configure the buttons on the Qosmio F50 - 12J LED?

  I've recently upgraded to Vista with Windows 7 Ultimate edition. I downloaded the drivers of value added package and it seems to work, but I can not configure some of the buttons because when I press the LED button and the support of key Toshiba starts there is not some options for the buttons that were there in Windows Vista...

  Is there a way I could add the same button options I had with Windows Vista?
  My laptop is the Qosmio F50 - 12J and I use Windows 7 Ultimate 64 bit.

  You installed a driver of Flashcard support? You can download it from:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• How to plot a graph with no fixed time interval?

  Hello

  I know that this question is a bit silly... but still, I would like to know how to find...

  If the signal is generated randomly by time, how it chart in the chart since its interval must be fixed?

  as the following picture

  

  I think graph XY can achieve, but is not what I want because the signal is generated continuously for a long time.

  I hope that data must be updated, graphic - mode this possible?

  Use a fixed size queue and make a queue with loss when new data. It essentially becomes a data buffer of length defined by your queue size. To display data, use 'Get Queue Status' with 'Elements to return' = True.

  (Or have fixed an array of size and have a circular index of items - but I think that the solution of the queue is cleaner)

• How to configure the FWSM with HSRP support

  Hi all

  We have 2 * 6500 Series switches with each FWSM core installed.

  There are some users of VLANs (each floor) and a lot of servers inside that belong to some other VLANs.

  Basic switches have been configured with redundancy HSRP (active/passive).

  Today, I am picky with FWSM routed mode configuration.

  There is no problem with the default configuration and testing,

  I mean assigning VLANS to FWSM and delete addresses IP of MSFC.

  But unfortunately whenever I have such a configuration, do I lose naturally redundancy between switches.

  In our situation HSRP is a must.

  Is it possible to fix this design in routed mode, with support HSRP. ?

  Thank you

  Erdem.

  Hi Erdem,

  (correct me if I'm wrong, Jon) - If you remove all the Lass you must route all traffic of course the FWSM.

  What we did was to create a transfer network (VLAN) with a SVI and FWSM inside external interface. Now, the default gateway on the FWSM is on the IP address of the SVI. So most of the range is configured on the switch.

  Kind regards

  Jürgen

• How to configure UCM ACL (with WLS & ADProvider)?

  Hi all
  
  I have problems to configure ACL. So far, only accounts and the securitygroups define security, ACL has no effect.
  
  So far, that I have configured right
  config.cfg-> UseEntitySecurity = true
  
  I was following the script of the user:
  Users of the AD: Test1, Test2 (both are members of the two groups in the next line)
  Ad groups: TestRole,@TestGroup (RW)
  The University Complutense of MADRID SecurityGroup: Test
  Role of the Complutense University of MADRID: Testrole
  -> Test: TestRole (RWDA)
  
  Point at the Complutense University of MADRID
  Account: TestGroup, SG Test
  -> The members of the AD Group Testrole should get RWDA and @TestGroup (RW) members should get RW in this element, causing that Test1 and Test2 can point RW (so far works well)
  
  Now when to add Test1 or Test2 with RWD to the user access list, they may not always delete (error, is that "doesn't have sufficient privileges to access content account TestGroup")
  If I add Test1 or Test"with R to access of the user list, they can still update
  
  No idea how to do this? I understand the functionality?
  
  I thank in advance
  
  -hk

  If your ACL work properly then user would NEED to be in the list of the user, or that they would not all permissions on the content.

  You really need to add all the SecurityGroups where you want that ACL is applied to the SpecialAuthGroups configuration variable - see this post useful.

  http://blogs.Oracle.com/Kyle/entry/new_security_configuration_flag_ucm_ps3

  FOR EXAMPLE
  SpecialAuthGroups = Test

  Once you have set it up correctly you are right in that you can now control permissions by changing permissions in the access of the user list. giving pernmssions Test1 (RW) through the access of the user list will remove remove permisisons.

  Tim

• How to add a button to Position fixed?

  I don't know anything about CSS! Please answer as if a person with no CSS knowledge. My Web page has no CSS code. It is simply the text for the lyrics of the songs that I wrote. I would like to put a tread on the right side button which will be "hover" even when the page scrolls. I have the button (called 'BACK') already made, but it is positioned on the bottom of the page. How can I keep the screen constantly. If you need it, here is the page:

  http://dittydaddys.com/lyrics.html

  Save the attachment and change the image references to your local files.

  http://www.leannehoad.com.au/temp/lyrics.html

  for example, http://dittydaddys.com/back2.png should be changed to back2.png