calibrate the measuring instrument

Similar Questions

• The "measuring instrument of Adobe" will be available in future versions of the player

  Hello

  Currently, the Adobe of measure tool and increase function is available for use in Adobe Reader 11 (in Internet Explorer), without process through a process of Cycle of life, basically, all PDF files get this feaure. This will be the case in future versions? and where is published that detail?

  Thank you very much

  Trevor Lee

  IS analyst, Brighton and Hove City Council

  The future is here: why not try the latest version of the reader yourself, XI is already obsolete...

• I cannot place components or measuring instruments

  Hello

  I installed NI Circuit Design Suite (Student Edition) about a month ago as my course requires it to hand - in assignment. Two days ago he ceased from allowing me to edit or place measuring instruments or components. When I installed originally, I made sure to activate as the professor said others had forgotten in the past. My license manager OR also verifies this, saying that it is enabled for my computer, so I have no idea what could be the problem. I have an assignment due Tuesday, help with this would be greatly appreciated. Thank you very much and happy thanksgiving!

  Robin

  Before proceeding with a trial of re - install, check the tabs on global restrictions and Circuit to see if maybe some of these options there have been activated. This can cause this problem, if they were lit. I can't verify this on my version because I do not have these options in Power Pro.

  Make a re-install from the CD usually faire³ does not work like that removes only the core files. It leaves the other behind and information files behind. So if something other than the core files is cause it will still be there later.

  Try to do this instead. GoTo C:\Program NIUninstaller Instruments\Shared\NIUninstaller and find the program "uninst" call open. A dialog box appears with a list of programs on the left side. Select the program you want to learn Circuit Design Suite 10.1 Pro to highlight, and then right click on repair. Make sure your CD is in the front player to click on repair. This should re - install everything back, hopefully, to the way it was when it was first installed. It is always safe and won't remiove all files saved circuit. I use it as a last resort, but it seems already there. I had success by doing this to fix strange problems that seem to come out of nowhere.

  I hope this helps I am running out of ideas

• Agilent 34461 to read? and controls the measure

  Hi all

  At the present time, I have some writing using LabView.  I'm followed certain current over time until that breaks the device, and everything works like I want it.

  I have my code setup so that the measure command is sent every x seconds (a variable which can be set) in a while loop.  I was wondering if there is a way to have it constantly measure and then I read only the current every x seconds.  The reason why I ask is because whenever this command is sent, you can hear the relay of Agilent clicking when it is triggering, and if I send you this command every second, they can be hard on equipment.

  Is there a way to always measure as when it is not in remote mode?  Can I use the reading? order to get read the current?

  I don't expect everyone should become familiar with this instrument, of course.  As I am new to LabView, I was wondering if this is possible (maybe even to other pieces of equipment).

  Thank you, Natalie

  I'm sure that you are looking for something like this

  

• Where is the measure of the CD player tool?

  I follow the instructions that basically say "click Edit > analysis > measuring instrument" and illustrates it with a seemingly different version of player screenshots. The screenshot shows an analysis between Protection and accessibility, but I don't see here in my installation.

  Look at the tools > measure

• The measure in vanishing problem Point

  Hello world. I'm currently using PS CS5 Extended to measure some objects in Vanishing Point (because I need the measures to comply with a certain plan in perspective) and I came across something that doesn't seem right. I'll try my best to describe it. I paint my plan in perspective based on a white Reference square 60 x 60 cm. Then I calibrate the grid (with the measurement tool) and when I exceed the perspective towards the vanishing point (around the small sides of the square) evething is fine, my calibration value does not change (as it should). But when I express a point of view here since the vanishing point (to the great sides of the square) my calibration value change, it's value increases. It is a HUGE problem for me because that influences all my subsequent actions. It makes me a question, how to correct measures are really. When I extend the grid of the calibration value must NOT change.

  Please can someone explain why this is happening?

  Testing with this, I see that if you drag an edge of the plane away from the vanishing point, the grid begins to evolve with it. So while your messurement length is not changed, the plane which he measured decreases (it's why your number of measure is increasing). This is certainly a bug, I'll connect it with the engineers.

• Is it possible to calibrate the tool rule in centimeters?

  I need to show specific reports on the image, for example, this distance is it's to that. A measurement tool that works in pixels is quite heavy. Is it possible to re - calibrate the tool rule to measure in millimeters, centimeters, etc.. ? Pixels don't really do for me.  It seems like an obvious choice, but I can't understand how do.

  or click with the right button of the mouse on the rule.

• I can no more color calibrate my monitor Apple Cinema Display 10 years because it is more compatible with my iMac Thunderbolt.  How can I color calibrate the Apple Cinema Display Monitor?

  I currently own an iMac OS X El Capitan Version 10.11.4 27 inches (2 1/2 years) with Thunderbolt technology.  I also have a screen of cinema with older technology.  Previously, when the technology was the same for the Apple display and my previous iMac, I was able to color calibrate the Apple cinema and my iMac but it is no longer the case. I know that there is a way to color calibrate the monitor Cinema with old technology when the iMac has the Thunderbolt technology, but cannot remember what are the steps.  The colors on the Apple Cinema are out of whack and too bright.  Can anyone help?  I'd appreciate any help you can provide.  Thank you.

  Henriette

  PS: The color calibration device I own is a gretagmacbeth eye - one display2.

  Hello henriettefromnovato,

  Thank you for using communities of Apple Support.

  I see you want to calibrate the color of your movie screen.  You can calibrate your screen by following the steps in the link below.

  OS X Yosemite: calibrate your screen

  If you are unable to do so, then please be more specific about what happens when you try and calibrate.

  Have a good.

• GarageBand 10.1.1 update, can't see all the logic instruments

  Before joining Garageband 10.1.1 I could see and use all the instruments of my logical instrument library.

  After this update, I can't. For example, my guitar options are now limited to:

  But logic offer this (and until the upgrade, I think that Garageband has shown the same)

  

  Projects using, for example, 'British battery Lead synth' always open and play well in Garageband 10.1.1

  But new projects in 10.1.1 obviously do not have this tool available

  I tried:

  Download essential sounds

  Download All Available sounds (this added to some instruments of the Orchestra)

  both are now gray and that did not help.

  (All logic loops seem to be available in Garageband very well).

  Thanks for any advice.

  Some of the missing instruments are appearing for me in the legacy section, when I enter the name in the search field.

  Instruments that are completely absent, will play in GarageBand, if I copy draws them from instrument to iNstrument library GarageBAnds logics.

  For example, copy,

  / Library/Application Support/logic/patches/Instrument/guitar/British British Synth Lead.patch/British synth Lead/001 battery battery stack Synth Lead.cst

  TO

  / Library/Application support/library/Track Settings GarageBand/Instrument / software / guitars / British battery Synth Lead.cst

  and restart GarageBand 10.1.1

  Correction: He works initially, but now GarageBand is either off or blocked.  He worked for "Tweed picked Synth", but cannot be to ' / British battery Lead synth»  We better wait for a fix for this.

• Calibrate the Panel 2 on Libretto W100

  My knowledge and my ability as a manager should mean that this issue is a no-brainier, but he beat me!

  The second (lower) Panel of my W100 needs to re - calibrate, but I can't convince the device to do. I consulted * Tablet PC settings * and I tried * calibration *-it allowed me to calibrate the display panel 1 (top) perfectly. With the 2nd group, trying to tap the cross produces the usual sound and the circle where my finger pressed, but he would not recognize the "tap." The only option was to support on * Esc * to exit.

  When you try * installation * (in * Tablet PC settings *), it seems that the device cannot deal with the idea of having to support on * entry * continue - be it on the virtual keyboard or a USB device. Accordingly, it is not possible to precede real calibration screen (even if I can get beyond the command "Touch this screen to identify it as the touchscreen".)

  Two touchscreens are working perfectly, the works of virtual keyboard perfectly on both panels... it's just that the calibration process will only allow me to calibrate panels 1 and not 2 (even though I chose the Panel 2)

  Y at - it a secret that I am not deprived?

  Any help would be much appreciated.

  Hello

  Can you please try this method for calibration of the Panel:

  Tap 0) set it to zero, if the calibration data has been backed up.
  (1) 1 select. Inner cover of Toshiba 1024 x 600
  (2) calibrate
  (3) select 2. Inner cover of Toshiba 1024 x 600
  4) press reset
  (5) re - select 2. Inner cover of Toshiba 1024 x 600
  (6) calibrate
  Calibrate 7) is fine. (16 points of the cross)

  Please send comments.

• Calibrate the compass of the iPhone?

  I have a new iPhone OS (iOS 9.3). According to Google Maps, the streets of my neighborhood are perfectly North/South and East/West as close as my eye can detect, both within a few degrees maximum. But the compass in my iPhone shows them being about 15 degrees off the coast of true North or 30 degrees on the magnetic north. The magnetic declination at my location is about 15 degrees, it's consistent, but seems to be about 15 degrees off the coast.

  Is it possible to calibrate the compass of the phone? Or a compass of this kind is simply not terribly accurate? Or Google Maps is from afar? (The latter seems unlikely.)

  I found the web pages that talk about ball to do a bit of red to move around the screen, but I get only the ball. I tried to quit all applications, including the compass application and then launch the compass application, as suggested on one site, but I don't always get the red ball of calibration.

  What I am doing wrong? Or this version of automatic calibration and a little off?

  Thank you

  Calibration of the compass requires that location Services on. The phone detects if it is calibrated or not and will display the calibration screen if it is not.

  Rather than relying on Google Maps, get a real pathfinder compass and check the phone against it. Use the compass to draw a North-South line on the floor with chalk, away from any metal (including the iPhone), then check the iPhone against the line you drew.

• Satellite Pro 4600 calibrate the battery?

  Hello

  My Satellite Pro 4600 battery is pretty weird. I always completely load to 100%. But when I use my laptop and it reached 60-65%, it goes down to 3% of the battery. Now, I was wondering if there is a way to calibrate the battery, so he sees it as a battery of 100% full again? Anyone who can help me?

  Thanks in advance

  Hey,.

  Tips for the battery charge.

  Unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off, indicating that the battery is fully discharged.

  Remove the battery.

  Using a soft cloth, wipe the battery packs connectors and AC adapters.

  Reinsert the battery.

  Plug the power adapter from the computer and check the wall outlet, ensuring that the connection is firm.

  When the PC is off, let the battery charge until the icon or the battery light turns green.

  Disconnect the power adapter.

  Remove the battery.

  Wait 30 seconds and reinsert the battery.

  Reconnect the AC adapter.

  Let the battery recharge until the battery status light turns green or the icon appears at 100%.

  Now your battery must be charged completely. Unplug the computer from the wall outlet and turn on the PC. You should notice more autonomy.

  See you soon

• Satellite C660 - 25 c - how to calibrate the battery

  Hello

  First of all, I apologize for my bad English.

  I would like to know the procedure to calibrate the battery of my Satellite c660 - 25 c.

  Thank you

  Sincerely, romat1993

  It's pretty easy.

  To calibrate the battery, it of necessary to charge the battery until the battery indicator indicates that the battery is fully charged.
  Then, unplug the AC adapter and keep the battery discharge until it s completely empty.
  Then connect the power adapter and charge the battery again.

  This procedure should be repeated two, three times in the line.

• How to calibrate the heart rate monitor?

  How to calibrate the heart rate monitor that shows a too high concentration?

  Hello

  It is not possible to calibrate the heart rate sensor. However, various factors can affect the performance of the detector.

  During training, to optimize the performance of the heart rate sensor, ensure that you wear your watch fits on top of your wrist.

  Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.

  The sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements (e.g., tennis). Other problems that can affect the performance of the sensor include the perfusion of the skin and wrist tattoos.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• When I play notes on Midi controller it causes the software Instrument track go Mute

  Maybe subconsciously I changed a setting in logic because all of a sudden, when I go to play the software instrument track I play notes on my Midi keyboard on going silent. I can it reactivate manually, but when I start playing again he cut once again. In addition, some keys have stopped producing sound. I play a keyboard 88 and only 2 of the keys stopped working. But they work when I listen through the speakers of keyboard. Simply, they do not all sound when I try to play in the logic. Any help would be much appreciated and I am very new to logic so if you could use terms lay that would be very useful.

  try...