Agilent 34461 to read? and controls the measure

Similar Questions

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser."

  I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?

  Do exactly what the message says, and it will go away.

• I get the message saying launch adobe reader and accept the license agreement for end. How can I do this

  I get the message saying launch adobe reader and accept the license agreement for end. How can I do this

  : Windows in C/Program Files (x 86) /Adobe/Reader11.0/Reader and doiuble click on the file eula.exe .

  Mac: Go to Mac HD/Applications and double-click the Adobe Reader.app

• Before displaying PDF documents in the browser, you must start Adobe Reader and accept the end-user Li

  Since two or three weeks, whenever we try to open a PDF file, we get the following message:

  Before display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser.  There is no link in this post, and I can't find where to launch Adobe Reader to accept this agreement.  I do not understand why we started having problems all of a sudden, but it is extremely frustrating!

  We have a Mac OS X v. 10.7 Safari v. 6.0

  Thank you very much!

  If you have installed the Adobe Reader software to the deafult location you will see in your hard drive / Applications folder.

  Try this:

  1. Quit Safari

  2. from Finder > go > go to folder... > type in the path: /Applications/ and click 'Go '.

  3. run "Adobe Reader"

  4. accept the end user license

  5. open a PDF file in Safari.

• My document Pages when sent in PDF format opens with Acrobat Reader and displays the text pane

  Hey team

  I am a new user of recent Mac and I have some difficulty with the Pages.

  I'll create a new document and save it as a PDF file (save it to the desktop), when I open it again, it opens with Acrobat Reader and the text released along side this one pane. It does not open a document own stand alone. This cause me a problem when I want to send it as an attachment, as it includes this component, as well as all other toolbars with.

  Any help on this would be appreciated.

  SSA56,

  When you send the PDF document as an attachment, it will be sent as a document 'stand alone '. It will be open according to the preferences that are set by the receiving party.

  

• Satellite A300-146 - CD/DVD read and write the question

  I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB of RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family
  I use the windows7 RC version.

  My DVD burner does not work correctly.

  (* 1) not read 700 mb CD and don't read do not more DVDs.*
  A few months ago he read sony DVD, read all CD and dint read some local DVD. Now, it is not read sony DVD and and all the CD that I used. But reads the local DVD...

  (* 2) a few times it can write DVD but most of the time this is not not writing DVD Nero 7 display of 100%, but the DVD is not written anything.*

  I use Vista drivers for my Window 7 operating system...

  3. should I install windows 7 drivers... ?

  4. are there specific drivers for DVD player. ?

  Experts or those who have recovered from the same problem. Please help me.

  Thanks in advance.

  Hello

  Maybe your CD/DVD drive becomes faulty... What do you think?

  But before you think to a new disk, you must remove the server - and lowerfilters in the registry. You can follow the workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Also, make sure that the CD/DVD drive lens is clean. You can use a microfibre cloth to clean. This rag doesn't scratch the lens.
  Check this box!

  Finally and above all, there is no special driver for CD/DVD drive. It s a part of t Windows and can be updated.

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD

• How to enlarge a pdf file in 'reader' and print the document expanded

  I can print the size of the original document in the reader.  Can I enlarge the document using the button at the bottom, but I don't see where I can print this "expanded" + document

  Hello

  I suggest you to follow the steps and check if it helps;

  (a) open the file on the drive of a Windows App.

  (b) click print.

  (c) click on the printer, click the size arrow drop-down menu and change the size.

  Try to print now and check.

  Check out the link;

  Windows player: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows-8/reader-FAQs

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Hi, my camera is a nikon d 5300. Lighrtoom is 5.7.1. Lightroom can't read and develop the pictures that are taken in raw. If I sort to import raw photos - there is the error report that lightroom does not have this kind of raw format.

  Hi, my camera is a nikon d 5300. Lightroom is 5.7.1. Lightroom cann not read or develop the photographs that are taken in raw. If I try to import raw photos - there is the error report that lightroom does not know this kind of raw format. My computer is 1 year (Win 7 HP). Who could help me?

  Eugen

  DJ, the version number is in the subject line: 5.7.1. It's weird because this version should support the D5300 very well. My main guess would be a bad player or a bad USB cable.

  Eugen, you can try plug the camera directly and download the images like this?

• Start Adobe Reader and accept the agreement

  I am trying to launch and accept the terms of the Adobe Reader software

  Hi kipk24212320,

  Under Windows, you might navigate to "C:\Program Files (x 86) \Adobe\Reader (version) \Reader", and then double-click eula.exe and accept the license.

  On a MAC, open the drive by clicking on its icon in the Applications folder, and then follow the instructions to accept the license.

  Kind regards

  Ana Maria

• How to read and display the .ai file in CS4 SDK?

  Hi all

  I drew an own and saved the socument as file traingle.ai.

  Now, I want to read/open the traingle.ai file in the plugin.

  [Lets say, I want to read this file based on GoFilter ()]

  Is there an API to read file .ai in CS4 SDK? and display as well?

  If you mean autonomous (outside Illustrator) the answer is no. The SDK is reserved for the plugins loaded into Illustrator. If you want to open a file from Illustrator that is perfectly doable if. I think that AIDocumentList:: open() that will handle.

• How to read and understand the information in the event logs

  Hey Microsoft, I performed a task of Information on performance. I have several criticisms and doubtful window logs in Event Viewer that is as much affect performance. I don't understand all the information on how to deal with them as I have not very in computer science. Can you please tell me how I deal/delete and those to save using total evidence silly English. There is also an application firewall re being not recognized even if I have AVG and Works installed.

  Thanks for your help.

  OT: EVENT LOGS

  Hello LadyWilliamson,

  Click on this article which describes the event logs in Windows XP. Most of the information is still topical for Windows Vista and Windows 7.
  308427 KB - how to view and manage the event logs in Event Viewer in Windows XP

  
  Click on this site Microsoft Web is for Windows event logs 7
   
  Vijay B information should answer your other questions.

  Thank you

  Marilyn