Satellite C660 - 25 c - how to calibrate the battery

Similar Questions

• How to calibrate the battery

  I would like to know how to calibrate the battery from the computer? Please help me.

  You give all the details on your computer.

  Contact computer desk mfr of support, as in their forums, or watch its knowledge base / faq.

• How to calibrate the battery for Satellite P750

  I have a Satellite P750 seems to also have a problem with the battery when it is asleep and NOT trendy
  She stops going flat in about 3 hours.

  Nothing connected except a dongle for the mouse. And he sleeps there is no display going.
  It is a few months old... I think it can be calibrated

  Can someone please tell me how to recalibrate the battery.

  Thanks in advance

  Hello

  You can calibrate the battery very easily.
  Disconnect the power adapter and leave the laptop disconnected until the battery is completely discharged.
  Then plug in the power adapter and charge the battery until the battery indicator (LED) would turn to green.
  This must be done and repeated 2 - 3 times in the line.

• Satellite C660 - 1 HL: how to reduce the fan noise?

  After buying the C660 (1 HL) I'm especially glad of his duties - if it was the bad noise it emits.

  I use laptops for 12 years, but this one is really annoying with every minute repeated with penetration hum of a fan, even if the laptop is in sleep mode.

  I compared with a C650, who is often quiet and his fan, if being run, does not cause that kind of noise.
  So far I found any kind of control for the fan, no driver or powermanagement setting, that I had before for example with a Satellite M70.

  I always thought, technological development will bring improvements, but not the trouble of this kind.

  Thanks for the tips of any solution

  GW

  PS: I'm on Linux (Ubuntu) and Windows 7 another possibility, while having this problem. BIOS is upgraded to V1.80

  In Win 7 power management, cooling modules and the processor performance can be set down.

  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  There you should find options like power management Toshiba Power Saver and processor that helps reduce the performance of the processor.
  This would reduce the heat dissipation and temperature level.

  For optimization of power management Linux please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64329

• Satellite P200: How to calibrate the monitor to get the same colors using Photoshop CS3

  How to calibrate the monitor to get impression that looks like the picture on the screen?
  I use Photoshop CS3.

  When I get a pic of how I want it on the screen and try to print, it prints a lot more dark. I was able to calibrate my monitor iMac for photoshop, but could not find a way to do it with my Satellite P200.

  My printer is a Canon ip4300 and I'm using paper and ink of Canon.

  Hello

  Sorry, but I think that there is not much to do. I guess you have right ICC profile, but something like that is not supported by Toshiba.

• Satellite Pro 4600 calibrate the battery?

  Hello

  My Satellite Pro 4600 battery is pretty weird. I always completely load to 100%. But when I use my laptop and it reached 60-65%, it goes down to 3% of the battery. Now, I was wondering if there is a way to calibrate the battery, so he sees it as a battery of 100% full again? Anyone who can help me?

  Thanks in advance

  Hey,.

  Tips for the battery charge.

  Unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off, indicating that the battery is fully discharged.

  Remove the battery.

  Using a soft cloth, wipe the battery packs connectors and AC adapters.

  Reinsert the battery.

  Plug the power adapter from the computer and check the wall outlet, ensuring that the connection is firm.

  When the PC is off, let the battery charge until the icon or the battery light turns green.

  Disconnect the power adapter.

  Remove the battery.

  Wait 30 seconds and reinsert the battery.

  Reconnect the AC adapter.

  Let the battery recharge until the battery status light turns green or the icon appears at 100%.

  Now your battery must be charged completely. Unplug the computer from the wall outlet and turn on the PC. You should notice more autonomy.

  See you soon

• My Satellite C660-155 won't boot to the top

  My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

  It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
  Any advice would be greatly appreciated.

  For better understanding, you must offer more specific information.
  You can enter boot options using F8 at startup?
  Figure option fix my computer in the list?
  You can boot OS in safe mode?

  Did you create the recovery disk?

• How to calibrate the heart rate monitor?

  How to calibrate the heart rate monitor that shows a too high concentration?

  Hello

  It is not possible to calibrate the heart rate sensor. However, various factors can affect the performance of the detector.

  During training, to optimize the performance of the heart rate sensor, ensure that you wear your watch fits on top of your wrist.

  Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.

  The sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements (e.g., tennis). Other problems that can affect the performance of the sensor include the perfusion of the skin and wrist tattoos.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• Satellite A300-1PH - how to improve the battery life

  I want to get an extended battery...
  How to improve the battery life?
  I have the Satellite A300-1PH.

  Hello

  You want to extend the battery work in order to use the laptop longer with the battery power?

  Well, in order to extend the battery work, you should check the Vista power settings.
  Here, you can assign some settings like brightness etc. who would save the energy of the battery of the screen.

  For more details, see this document how:
  + How to manage Windows Vista power management features? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  If you want to know wow to get the most out of the battery, consult this FAQ from Toshiba:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=20

  See you soon

• How to calibrate the PCI-6110 with NOR-DAQmx

  Hello

  I am a new user of the PCI-6110 Council tries to run the calibration using LabVIEW procedure. I look at the document "Calibration" on the page of the manuals for the Board of Directors,

  http://sine.NI.com/NIPs/nisearchservlet?nistype=psrelcon&NID=11888&lang=us&q=FQL: 28locale % 3Aen % 29 + AND + % 28phwebnt % 3 A 1081 + OR + phwebnt % 3 A 7075% 29 + AND + 28nicontenttype % 3Aproductmanual % 29 + AND + % 28docstatus % 3Acurrent % 29% 20RANK % 20nilangs: en & title = NOR + PCI-6110 + manual

  One of the first steps in the document is to call the AI_Configure command to set the input mode, beach, etc. I'm using LabVIEW 8.5 with the NOR-DAQmx software, and I can not find the command (which, in LabVIEW, seems to be "AI Config.vi") anywhere. The calibration paper was written in 2003, and I gather from Google searches (please, correct me if wrong) that this command is actually a part of NOR-DAQ traditional, who was replaced by driver OR DAQmx.

  My question is this: what is the equivalent to AI_Configure command in the latest software? Is it perhaps a subsequent document describing how to calibrate using NOR-DAQmx?

  Thanks much for any help.

  Tom McLaughlin

  Hi Tom,

  The calibration Procedure series B, E, M, S, which is also linked from this page, describes how to calibrate the PCI-6110 with NOR-DAQmx.

  Brad

• How to calibrate the screens of Adobe products? For the most part, I'll use Illustrator and Photoshop.Can someone make a difference between the calibration and the Hardware calibration software using (Spider)? Thank you.

  How to calibrate the screens of Adobe products? I will mostly use Illustrator and Photoshop.Can make all the difference between calibration and the Hardware calibration software using (Spider)? Thank you.

  I use U2415 from Dell.

  I use the Spyder Pro 4. The process is quite simple - install the software, plug the Spyder and follow the steps listed in the program. I would recommend also, install the latest version of the software directly from the site of Datacolor instead to install from the disc supplied (probably outdated).

  Benjamin

• Portege Z930: How to keep the battery alive as long as possible?

  Hello

  Got a Portege Z930 recently, I do not know how to manage the recharge of the battery in order to maintain 'live' as long as possible.

  I'm mainly using computer at home, to leave the battery and then recharge, but I'm not sure it's a good idea. I had an A-200 before satellite, also use it at home and keep connected all the time; After a few years, the battery capacity decreases

  Thanks in advance.

  Hello

  > after a few years, the battery capacity decreases

  It's nothing unusual after a few years of any battery would start to lose performance.
  Generally speaking after 500 times charge cycles the battery begins to lose clean performance.

  Of course you can remove the battery and could use the laptop only connected to the power adapter, but in this case, the laptop would shut down when making connection interrupted.

  To extend the battery work, you will need to calibrate the battery from time to time.
  To calibrate the battery, you must discharge the battery until it is completely empty. Then connect the power adapter and charge the battery up to full charge. Repeat this procedure two or three times in the line.

  Greetings.

• Bad battery live on Sat M35X - how to reset the battery meter?

  Hello world

  I have a few years old Satellite M35X-S149, no problem so far however I have been affected by the life of the very poor battery (like 10 minutes of full load at 0%). I've reconfigured the power options so that she wouldn't do anything even when the battery went to 0% (not set auto standby extended) and it runs for another 45-60 minutes after 0% battery.

  So I guess the battery is faulty but not dead, and in my opinion, there is a sort of 'meter' that does not work as assumed, is it possible to reset o calibrate?

  Anyone ran into this same problem?

  Thank you!

  Hello

  I can give you a tip how to recalibrate the battery:

  1. the battery should be fully charged to 100%
  2. then you will need to change the profile of powersaving as follows-> Hibernate & standby off, disable the options that cuts off the machine when you batt. stabilize so that the machine stops when the battery is at 0%
  3 let the machine work for how long does the battery last
  4. once the machine stops itself when the battery is COMPLETELY empty, let the battery charge (the laptop must be turned off)
  5. check if it worked and repeat the operation if the result does not satisfy you
  6. in the case of NO success, I would replace the battery

  Welcome and good luck

• Satellite L775-15 q - plan to charge the battery for long battery life

  Hello

  I just bought a Satellite L775-15 q and I want to know the best plan to charge my battery, so it can last as long as possible.
  Do I always leave the laptop plugged into the charger power cord, no matter if it has full battery or not? Should I always leave the battery drops to 10% and then charge it to 100% and then remove the power cord? Or do I have to do this from time to time and not every day?

  Thank you!

  I agree it is important that you should calibrate the battery from time to time
  This means discharge battery until it would be completely empty then load it again until the State of battery charge would achieve 100%, or until the battery indicator would turn to green.