Calibration of Audio input does not

I tested my two my Logitech microphone and microphone in the computer outside my Captivate 4 and both work very well.  However, when I try to use them to record audio, Captivate refuses to acknowledge that they exist.

When I cancel the registration attempt, check my settings and try again, Captivate completely off.

There was another discussion forum that seemed to answer that question, but I couldn't access this patch, they provided, and other Councils seem to relate to XP users.

I work under Windows Vista with Captivate 4 as part of the Technical Communication Suite 2.

Hi pwvenderley,

Please visit it to solve your problem:

http://blogs.Adobe.com/Captivate/2009/03/audio_play_back_and_usb_mic_is.html

Tags: Adobe Captivate

Similar Questions

  • Audio input does not not on my Satellite A200 - 1CR WXP SP2

    Hello

    My laptop is Satellite A200-1CR. Earlier I changed my Vista laptop to Windows XP SP2 home edition, but I have a problem. My audio does not.

    Realtek HD Audio input and output driver is there but does not
    Upcoming audio output.
    But not a supported Audio input.
    Please someone help and replay quickly for me.
    I'll wait for your replay.

    Thank you.
    Arul.A

    Hello!

    I just wanted to share a few experiences. When I shot down my system to Windows XP edition family of pre-installed Vista (Satellite A100) I went to the support section of the official site of Toshiba and downloaded all available for my laptop to XP. And everything has been working fine until now. Oh, I think this chipset driver I got from the Intel site.

    Maybe try to re - install some components like chipset driver (as the audio is embedded)?

    Good luck!

  • Satellite L40-B1258 - taken from audio input does not work

    Hi, the audio jack in my laptop does not work. When I bought it I don't check the audio jack, after a few months of using my laptop only then I discovered that the audio input jack is not working. I tried to connect an external speaker or the headphones and both do not work.

    In Control Panel > Sound > playback - only speakers is available in the list, there is no helmet. Help, please...

    Satellite L40-B1258
    Part No. PSKQEV-00V005AR

    The devices on which you can see when you turn on the devices see the disabled option?

    In any case being that peripheral external is correctly connected. Put the audio input to the end.

    When listen you to music on the internal speakers and headphones is OFF music or you can always hear it on the internal speakers?

  • HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

    Hello

    After a clean install of windows 8.1 the audio beats does not open.

    It appears in the control, but when I click on it nothing happens.

    I have sound, and everything seems to work ok, but I'm curious to know what happened.

    When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

    I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

    Any help would be appreciated

    Hello

    Download and reinstall the Realtek HD Audio software at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

    When the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • Pavilion x 2-10-n109nl: Audio services does not

    Hi all,

    at one point in time and after any particular event, my laptop (Pavilion x 2-10-n109nl with Win10x64) started does not recognize the audio device. It displays a red x is close to the 'Volume' icon in the taskbar notification as if no audio device installed and lists an "unknown device" in Device Manager. Find that this unknown device has been "Intel ESS Audio Device (WDM)" and managed to install it with Intel drivers went back to 01/12/2016, so for the moment I had all audio devices is properly set up and works, but the Red Cross disappear and if I try to start Windows troubleshooting service it says "Audio services does not. This who can I try to do to get the problem resolved?

    Thank you all,.

    F.

    Hey @Ledbetter92,.

    Driver Audio Conexant is one that is registered in your page of drivers like Audio driver for you. This part is so good.

    Thanks for being patient and following all the steps! I very much appreciate the cooperation while trying to find a solution you did great! I wanted to make sure that I told you.

    You can try to do a reset of the BIOS. To reload the factory-installed BIOS configuration settings, perform the following steps:

    1. In the BIOS Setup utility, select the tab out.

    2. Select message Load Setup Defaults.

    3. Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).

    4. Press ESC, then press Enter to exit the installation program.

    Source: reload the default settings

    Here is the document of HP Pavilion 10 - n100 x 2 detachable PCs-No Sound from computer speakers and Audio output connector that was created for this specific problem. You'll see below I have included the context of the document and the version numbers for each driver you need. Could you please check the versions currently installed on your laptop?

    Here are the steps in the document:

    No noise is through the computer speakers and the audio output connector headphone or external speakers are connected. An exclamation point (!) appears in the device on the audio device manager. This question is exposed on Windows 10.

    To resolve this problem, follow the steps to download and install the following SoftPaqs to update BIOS and install device drivers:

    1. Download and install the BIOS update.

    2. Download and install Chipset Intel graphics, camera and Audio Driver Pack.

    3. Download and install the Driver Audio Conexant.

    Updated HP Notebook System BIOS (Intel processors)

    • File name: SP73945
    • Version: F.06
    • Review: has

    Chipset Intel Graphics, camera and Audio Driver Pack

    • File name: SP72830
    • Version: 604.10146.2652.361
    • Review: has

    Conexant Audio driver

    • File name: SP72855
    • Version: 1.58.0.50

    • Review: has

    I would like to know how it goes

  • Equium A100: Audio driver does not not WinXP

    Hi, when I bought my laptop I had Vista installed on it, I installed win XP, but I had no drivers, but I downloaded Toshiba & Utilities CD tools that have all the drivers for my lapop, everything works well only realtek audio driver does not work correctly when I restart my pc error appears, I made the screenshot of it it maybe you can help me with this problem.

    Here is the link to see srceenshot: http://rstheclan.googlepages.com/error.JPG

    Have you installed the two KBs (knowledge base) of Microsoft before running the installation program driver sound?

    You can try and download the audio drivers manually and give it a reinstall. Not to mention that this error message, play sound in Windows?
    Need drivers, you can find here: http://eu.computers.toshiba-europe.com (Support & downloads)

    Another question. What Service Pack you are using? Always SP2 or SP3 brand new? With the last of them, there are sometimes problems with the realtek sound card drivers.

  • Laptop Pavilion dm1 4010us and beats audio Panel does not work.

    I have a pavilion dm1 laptop 4010us, running windows 7 64 bit and beats audio Panel does not work.  I click Start, Panel, Sound and the Beats Audio Control Panel icon is there, but nothing happens when I click on it, so I can't change my audio settings.  Help, please

    Hello

    Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

    http://support.HP.com/us-en/document/c01868333

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Satellite L300-19F and WXP - audio device does not work

    Hello

    I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

    BTW: he used to work on Vista.
    What should I do?
    And thank you

    -Download driver audio Realtek HD Realtek page.
    -Go to the Device Manager
    -Remove the sound card.
    -Remove the High definition Audio Controller
    -Restart the laptop.
    -Reinstall the Realtek HD audio driver

  • HP G71-449WM. Windows 7 64-bit. "The audio service does not work.

    I downloaded all the updates that I can find anywhere. My roommate has deletion of things on my laptop for 'performance' and now I have no sound. I go to my device manager in the computer and it is says my IDT HD audio CODEC works correctly. And my Intel(r) High Definition Audio HDMI does not work correctly. What should I do to get his new? The the small speaker in the far right of the task bar icon has an X on it, as she was mute. BUT it's not. Help? /

    Hello

    Open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all displayed as status = started and the Startup Type = automatic

    Audio service

    Multimedia class Scheduler

    Windows Audio

    Windows Audio endpoint Builder

    Kind regards

    DP - K

  • My internal Microphone table (IDT High Definition Audio Codec) does not work

    Hello

    My internal Microphone table (IDT High Definition Audio Codec) does not work.

    I can't make calls from Skype.

    I've tried everything, but I'm still not able to solve the problem.

    Could you please advice me what to do?

    Could you please provide me with a link with the drivers, I might need to reinstall.

    My computer is Windos 8.1, HP, Intel i - 7 CPU, 64-bit operating system.

    I would really appreciate your quick response to solve this problem.

    Thank you very much

    Antonio

    Hey,.

    Try installing this driver: driver Audio IDT high definition (HD)

    If this fails, try to use the HP Recovery Manager to roll back the driver installed in the factory.

    After the two tests. I would like to know if the option worked.

  • "IDT high definition Audio Codex does not start"

    Windows Error Message "IDT high definition Audio Codex does not start" then said to check the audio device, WHAT to DO?

    Hello

    1. Once you get the error message?

    2 have you made changes on the computer before this problem?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Run the patch from the following link and check the status of the issue.

    No sound in Windows.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 2:

    Uninstall, reinstall the sound card driver and check the status of the issue.

    Uninstall the driver for the sound card.

    a. Click Start.

    b. click on 'Control panel' and select 'performance and Maintenance '.

    c. click 'System' to open the' system properties '.» Click the 'Device Manager '.

    d. click on '+' alongside 'Sound, video and game controllers"to expand this entry.

    e. right click on the audio device and click on uninstall.

    Download the latest driver from the website of the manufacturer of the computer audio card, install on your computer and check the status of the issue.

  • HP Pavilion 15 laptop: HP Pavilion - Audio Service does not

    Hi I recently bought a new HP Pavilion 15 and the volume down icon to the right, footer has an 'x' in a red circle next to it. When I go over it, it says "audio service does not work. I currently have no sound on the laptop.

    No idea how this can be fixed please?

    Thank you

    Hi Tom,

    Try the following.

    Download the Realtek Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe

    When finished, press and hold the Windows key and press R.  In the run window, type devmgmt.msc and press ENTER.

    Expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

    After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Let Windows load completely - it can automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click on the button set as default (it will be gray if already defined)-check if you now audio.

    If you have still no audio, hold down the Windows key and press R.  Type services.msc and press ENTER.  Search for audio Windows servive, right-click and select Properties.  If the service does not work, try to run.

    If you still receive the "Windows could not start the service windows audio on local computer» Error OX800706cc - the endpoint is double ' mistake, you're best bet is to do a Refresh as detailed on the link below.

    http://support.HP.com/us-en/document/c03538721

    Kind regards

    DP - K

  • My audio service does not work - I can not use my pc on mode safe by minegold. How to return to normal

    my pc starts only in safe mode and I like the audio service is not running.

    for example, when I play something with you tube, I can see the video, but

    without sound.

    Hello

    Audio service does not work in Mode without failure.

    The services are very limited in safe mode.

    1. Close all running programs and open the windows if you are back on the desktop.
    2. Click on the Start () button.
    3. In the search box of the Start Menu, type in msconfig
    4. Then press enter on your keyboard.
    5. The System Configuration utility opens
    6. Make sure that Start Selection is set for Normal start.
    7. Click the Startup tab.
    8. Make sure you start is not checked
    9. Press the apply button and then press the OK button.
    10. Click the restart button to restart your computer.

    See you soon.

  • AUDIO SERVICE DOES NOT

    Audio service does not... I get a message saying... this computer cannot play audio because the Windows Audio Service is not enabled... even after that activation still does not work... its recognizingal my reading, sound and recording... says they're all works... but still no sound... got a new sound card, still nothing

    Hello

    Refer to the steps below to solve the problem.

    Step 1:

    I suggest to refer to the link below and follow the step by step guide to fix issues with the no sound in Windows Vista.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Step 2:

    You can also check out the link below which provides an automatic fixit to solve the problem and also provides manual steps.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    If the steps above do not help you can also refer to the link below and follow the suggestions given by Linda Yen in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/56d0bf26-d5a7-42FD-9b95-d6ba89c53f6e

  • (Redirected) Waves maxx audio pro does not work

    Hello

    recently my windows has been corrupted, so installed a new but the waves maxx audio pro does not work in my inspiron 7548. When I open audio dell there is no options there is empty

    need help...

    Better for this post in the Forum Audio Desktop, here:

    http://en.community.Dell.com/support-forums/desktop/f/3513

    Bev.

Maybe you are looking for

  • The difficulty to restore my factory settings mac HELP!

    I can't restore settings macbook pro. I followed this video (https://www.youtube.com/watch?v=QdzefnG2fls), but I now get the same popup "this article is temporarily unavailable. "Please try again later '. Can someone please help!

  • How I choose the USB-6251 (full speed or high speed) data transfer rate?

    Hi, this is bose, FAE Samsung in Korea. I saw the USB-6251 specifications that it transfer data at high speed or full speed. How can I select speed mode? It depends on computer? Thank you.

  • orphaned files in a saved Briefcase

    How can I update the orphaned files in the Briefcase of vista on my laptop hard drive? I need to keep these files because they are all my photos. Am running vista & not tech talk savvy. My drinking drive is a usb kensington with ceedo on it. Thank yo

  • (Redirected) New Linux laptop XPS 13

    Friends, I think I need help.  I got my XPS and struggled to do the restore to USB.  I then upgrade and things are a mess. Can I go back to the factory without usb settings.  It's beautiful and I really want to use it. We hope to hear from someone. D

  • I want to know how to change the administrator account.

    Hi guys, I accidentally created an administrator account. He says now that my main account is not an administrator. I would like to know how to change the main administrator account and get rid of the administrator again one that I just created. Than