Calibrations were incorrectly

Similar Questions

• Presets were incorrectly?

  Hello all; I hope you have a great day.  I'm going, but I was working on the few pictures I took then to Helen, GA.  I downloaded the great presets; However, I have noticed that sometimes in the preview window, the presets look because they are "supposed to", and then when I apply the preset, it doesn't seem right.  For example, three presets I have are all supposed to apply different effects and look different, but each of them have a blur effect, dull when I try to apply them, and after you apply the preset, it even shows that they look in this way in the preview window too.  And some of them radically change colors and wind up showing a "grainy" effect and putting green in places where it shouldn't be, etc. It's all very strange.  I tried to reinstall the presets.  Same things happen.  I'll give you an example...

  These presets are all separate, but they all look exactly the same, and I know they aren't supposed to.  And I don't think that the problem is with the presets; I have the same problem that might come up with a completely different game settings predefined by another person/company.  No indication on that?  I have 6 of Lightroom.  Thank you all very much.

  You can try to manually update on 6.1.1 which fixes a number of serious bugs.  I don't remember seeing any mention of bugs related to the screening being fixed, but it's worth a try.

  Certainly not updating to the latest version 6.2.1 which was a disaster for many users, and for which Adobe has presented his apologies.  Instead, manually download the update to 6.1.1 (last stable version) here: Download Photoshop Lightroom.

• iPhone as strange. Should I be worried?

  Recently, I found that my iPhone did the things that I was not set up to do.

  When I looked in my safari AutoFill passwords, I found 2 put passwords in place for my internet which were incorrect bank account and would not accept the kind of password a bank account. 1 was 205IDT and the other! I removed them, and the next day they were back there.

  More the other day, I set my alarm but it has not extinguished, and when I woke up, I found that my phone has been in airplane mode.

  I am convinced that I did these things. should I be worried?

  iPhone runs the latest version of the software.

  It is recommended to upgrade to the latest itteration of iOS for your device.

  If problems persist after the upgrade to reset the phone to factory and test.

  Reset your device to factory settings - Support Apple iOS

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.

• Comparison of columns

  I need to compare two columns (SKU) on different sheets. When a number match corresponding cell in the price column must be entered on the first sheet in a new column named price.

  I tried to use the SEARCH and that seemed to work, as some results were noted as 'could not find the requested value', but others had entered price and when I was checking at random I found many others who were incorrect. I don't understand how a price was listed if it was not a match to the other sheet.

  Also, I wonder if I should be using a different formula.

  Thank you for your help.

  Hi jkeppel,

  Lookup() can be very useful, but will return a tight match.

  I generally use the INDEX/MATCH to do all my research. You can restrict it to exact match (find value) and it's actually easier than HLOOKUP() and VLOOKUP(). It also returns an error if you set it to correspond to a value that is not in the table of your choice.

  

  C2 = INDEX (Lookup: B (B2, Lookup::A,0)) MATCH)

  Quinn

• Cannot connect to Mozilla Support. It does not accept my user name or password. Reset password email says that my account is already activated.

  Tried to access the Forums of Support of Mozilla for Firefox Desktop Support, I've used several times. He cannot accept that my user name and password, claiming that they were incorrect. I tried the password reset function, which opened a window saying that accounts created before December 2010 may have connection problems. Reset your password below. It tells me to enter my e-mail address so that it can send me the instructions for setting up a new password. I get my e-mail address. It is said that we have sent an email to any account using this address. Please follow the link in the email to reset your password. I go to my email. Nothing is there. I wait, but still nothing.

  I return to the login page and click the link - I do not have a confirmation email - connection issues. A new window opens telling me to activate my account, I have to first of all confirm my email address. I enter my email address. I get an e-mail from Mozilla immediately, telling me that my account is already activated, and it gives me a link to connect. I click on this link. I get my login and my password again. Same error message denying me access and tells me to enter a correct username and password. I try twice with no success. Same mistakes repeated.

  So I try to create a NEW account using a different user name my email address. It doesn't let me do. It is said that the email address is already taken, and it does not allow me to proceed. In the end, I had to set up a new account with an email address that I never use, just so that I could access the functions of the help. I'm exasperated. I don't want to post my Questions that I do not use and having to open another application to access even the e-mail address. I want to be able to receive a message from Mozilla in my daily e-mail normal, if someone has replied to my message. But as Mozilla doesn't let me use my e-mail address for the new account, I put in place, I can't do that.

  It's very frustrating. Mozilla does allow me access to my original user account that has already been put in place with my preferred email address. And Mozilla will not let me create a new user account with my preferred email address. Now I'm stuck with a new user account which is linked to an email address that I never use and is not easily accessible to me. As a last resort, I access my new user account in the hope that it will allow me to change the email address associated with the account, but of course, this is not an option.

  Can someone please help me access my original account with my login and my original password? If a password reset is necessary, then I should not receive an email response telling me that my account is already activated (see below). If it is checked, then why can't connect? What is going on? Please help me. Thank you.

  It seems that your account has already been activated.

  You can connect to:

  https://support.Mozilla.org/en-us/users/login

  Thank you!

  Team support.mozilla.org }

  It's a bug

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=855599

• Cancellation of Apple's music has grayed out some songs from iTunes game

  Background:

  • I use iTunes game.
  • All the songs in my library have been downloaded by me.
  • I tried Apple's music for a while and then cancelled.

  Question:

  • Some of the songs that I downloaded in my subscription of Apple's music are now gray out and unable to be played.
  • On the iPhone (and previously on my Mac) I wonder to renew my subscription to Apple's music when I try to read them.
  • It seems that iTunes thinks that these are songs from Apple's music, when they certainly are iTunes songs Match (most of the songs is not yet on Apple music).

  Attempted fixes:

  • I tried all kinds of re - authorize etc and nothing works.
  • I talked at length to Apple on the phone who now asked me to install OS X (which I'm hated to do that I don't see it being a problem of BONE).

  How can I return these songs? Is this a known bug?

  Okay, that was user error. The songs were incorrectly uploaded from another computer!

• Cannot use New iPhone 6s.

  My wife had storage problems main with his iPhone 16 GB 6 so yesterday she upgraded to an iPhone 64 GB 6 s to our store of O2 in the United Kingdom.  The boutique place everything to him.

  However, when we arrived home my wife tried to update a quantity of applications but the phone asked for the connection information of a person with an e-mail address, we had never heard before.  A perfect stranger.  He then asked continually for its connection information, but when we put in it says that they were incorrect.  We have changed the password, but it would not accept a new either!

  We took the phone back to O2 and they said they had set, but they didn't.  The phone is yet ask the Apple account password, we have never heard, it's not recognizing the password of my wife and now she asks MY IDs!  We are not convinced of the ability of O2 to fix.

  Someone can help until my wife picks up the phone for credit and buy Android!

  All we want is for the iPhone to do what it's supposed to do and connect seamlessly with my iPad and iCloud wife.

  You will need to return the phone to the store for a refund / replacement.

  You run in the lock of the Activation.

  There is NO WAY to bypass the lock to iCloud.

  There is NO point to what iCloud lock if it could be bypassed.

  iCloud lock is a measure of protection against theft.

  Julian Brown wrote:

  Someone can help until my wife picks up the phone for credit and buy Android!

  This is a user - to - user, person forum answer you work for Apple.

  It don't worry we what brand of phone you buy.

• The transition to the new lenovo forum

  My profile is all messed up. My phone / location were incorrect installation.

  xtenpeben wrote:

  My profile is all messed up. My phone / location were incorrect installation.

  You can correct these items yourself my clicking your username upward at the top, then go to My Settings > personal profile > personal information. (I had to do the same thing).

• 57F Update error code

  I DID UPDATE SEVERAL TIMES BUT I GET THIS ERROR EVERY TIME I DO, THE CODE'S 57TH

  Hello Mathew plane,

  Please, give him another chance & perform the procedure below

  Diagnosis: The permissions were incorrect for some registry keys.

  Considerations: I've used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: you should back up your registry and store the backup in a sensitive dossier (see procedure below). You can also create a system restore, just in case. Not sure what anyone in this note? for example the registry editor, permissions, System Restore, registry keys etc change? Check the Microsoft Knowledge base. (I can not take any responsibility on the problems caused by your use of this procedure. I can say only this worked for me!)

  FIX: You * may * be able to use to Repair Office 2003 to identify the keys to the problem and then use the Registry Editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (Start > run and run regedit).

  3. in the registry from backup of your registry Editor (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the Retry button.

  9. If the error prompt is replaced by another invite for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11 when all the keys have been updated and the repair finishes and then close the registry editor, then try Windows Update again.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

  I hope this helps.

  [If this post can help solve your problem, click on the button 'mark as answer' or 'useful' at the top of this message. [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  -

• All-in-one HP Deskjet F4140... Message 'Problem' of the ink cartridge

  I get the following message when I want to print something.

  The following cartridges have a problem.  Far right, Tri-color in the cartridge.

  I don't know why it says more 'right' because in my printer the color cartridge is on the left side and the black is on the right.

  It is a new cartridge.  I tried EVERYTHING under the Sun... and I mean everything.

  Nothing works.  I am at a total loss.

  I've NEVER had this problem before with my printer.  He was always a great impression.

  Can someone help me please?

  I went through that information yesterday and it did not help to solve the problem I had BUT on a hunch, I removed the 'black' cartridge that is on the "right" side and the lights stopped flashing.  I replaced the black cartridge and now everything works as it should.  There was nothing wrong with 'color' cartridge that is on the left.

  The information provided by the program of 'diagnostic printer' HP that I installed were incorrect, because it indicates the problem as with the "color cartridge... located on the right side

• Ive forgot that my password and secret question answer for my hotmail account, no way to recover either!

  while checking the mail on my iphone the mailbox would not and says the password / user name were incorrect, tried to connect via safari, same problem, makes me think it may have been compromised. I went to change my password, but have forgotten my secret question answer * model * I tried after the password recovery process, Ive had the account for more than 5 years and really use it as an address to sign on sites that require an email address, and that my iphone was connected to the account more than a year I don't remember half of the information it wants to check me (names of contact emails sent etc) so I was denied access to the account, I have followed every step of aid continues to meet up with password reset option which I can't do because I don't know my secret question answer so im stuck, I hope someone can help, thanks a lot :)

  Hello

  The question you have posted is related to Hotmail and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=1

• After you download the Office Svc. 3 Pack, 6 important updates & 2 other updates failed due to an error 57F

  I have a PC with Vista Home Basic and remote access service. He sent me a message that the updates were available so I started the process. It downloaded & installed Office Service Pack 3 and all but 6 significant updates and 2 other updates failed. I tried 3 times to download & install the important updates 6 & when all 3 attempts have finished, the report indicates a 57F error code. In another location, trying to get specific information, I found: WindowsUpdate__0000057E and also Update__dt000 from Windows have been listed as the following:

  1) office 2003 Service Pack 3 (SP3) 108.2 MB

  (2) update 4 Microsoft Office 2003 (KB2543854) 12 K

  (3) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2553111) 3.4 MB

  (4) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2597035) 3.4 MB

  (5) update 4 Microsoft filter junk e-mail in Outlook 2003 (KB2598343) 3.4 MB

  (6) the update for Office 2003 (KB907417) 225 KB

  I hope someone can help to direct me to download & install the updates failed. Thank you!

  Hi Linda,

  Please, give him another chance & perform the procedure below

  Diagnosis: The permissions were incorrect for some registry keys.

  Considerations: I've used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  FIX: You * may * be able to use to Repair Office 2003 to identify the keys to the problem and then use the Registry Editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (Start > run and run regedit).

  3. in the registry from backup of your registry Editor (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the Retry button.

  9. If the error prompt is replaced by another invite for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11 when all the keys have been updated and the repair finishes and then close the registry editor, then try Windows Update again.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

  Also try running the difficulty to reset the components of Windows updates from the following link.
  How to reset the Windows Update components?
  
  http://support.Microsoft.com/kb/971058
   
  For more information, click on the link below,

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Skype crashes since my attached ISP modem Arris cable to my computer.

  Skype crashes since my attached ISP modem Arris cable to my computer. In my reports on the problems and solutions I tells me that I have an incompatibility problem with the RCA digital cable modem I do not have.  I'm running a 32-bit Vista system.  How can I fix?

  original title: incompatibility problem

  Much appreciate the input.  Understood that the installation of the Arris modem was a coincidence - or perhaps it worsened the situation.  In this case, some of my settings were incorrect, more the old modem that had changed my ISP to was the RCA modem which was not compatible.  I uninstalled my programs and software in the control panel.  Everything works now.

• Windows Update 57F error code!

  original title: 57F error code!

  I'm trying to update my windows vista 2007, 32 operating system. There are 23 updates that are needing to do. However whenever I try to update it comes up with error 57F code. Help, please. I tried several times!

  Please, give him another chance & perform the procedure below

  Diagnosis: Permissions were incorrect for some registry keys.

  Considerations: I used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: you should back up your registry and store the backup in a sensitive dossier (see procedure below). You can also create a system restore, just in case. Not sure what anyone in this note? for example the registry editor, permissions, System Restore, registry keys etc change? Check the Microsoft Knowledge base. (I can not take any responsibility on the problems caused by your use of this procedure. I can say only this worked for me!)

  FIX: You * may * be able to use Office 2003 repair to identify the keys to the problem and then use the registry editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (start > run and run regedit).

  3. in the registry editor back up your registry (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the retry button.

  9. If the error prompt is replaced by a different prompt for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11. when all the keys have been updated and the repair finishes and then close the registry editor, and then try again the update of Windows.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.