Call a page after you have created a primary key?

Similar Questions

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )
  

• Why can't I import several items after you have created a new folio?

  Why can't I import several items after you have created a new folio?
  My Folio Builder does not work and stops all the InDesign program, so I have to re - open.
  Thank you very much!

  Other layouts are not supported for import. The only way is to use the

  Add the command.

• How to add the reference key after you have created a table?

  Hello
  I have two tables:
  
  create table (t1)
  a key primary number.
  b the number);
  
  create table t2)
  c number,
  d number);
  
  
  Now, after you have created these two tables I want to alter table t2 by making the column 'c', referring to the table t1. How to do this?

  ALTER TABLE t2 add CONSTRAINT PK_C PRIMARY KEY (c);
  ALTER TABLE T2 ADD CONSTRAINT FK_C FOREIGN KEY REFERENCES (C) T1 (A);

• How do I create a branch to the form after you have created a new record

  Hello
  
  I created a master/daetail form with detail on the same page.
  It works very well.
  When you create a new record, on the details of the page, you enter the data, and you click Ok.
  Then you are directed to the main form, a report containing the lines of recordings.
  You must then click on the link in the column to change the record to add details.
  
  I want to do it is to branch directly on the same page after you create the record. Order to dot Hat I created a branch whith the value equal to CREATE demand.
  And the target is the same page. The problem is to the value of the primary key. This KP is created after sending, and it is not possible to recover because it is created right now. I hope I'm clear.
  
  To sum up the question: how to create a branch immediately to the same page after creating a new record?
  
  I have the page on
  
  [http://apex.oracle.com/pls/otn/f?p=4550 | http://apex.oracle.com/pls/otn/f?p=4550]
  
  The workspace is ESPACE2008
  Is the user name: guest
  the password is: noproblem
  
  The long form is page 42.
  The main form is page 41
  Unfoirtunately tables are not available.
  You can see the process of branch No. 50 on page 42.
  
  Thank you very much for your help.
  
  Christian

  Christian,

  I couldn't connect to your ws because I don't think that your guest user has developer privileges. But have you tried 'Back in the agenda key' property in the region of origin of your page DML process. This should return the value of the primary key newly generated in a page element when the page is loaded.

  Anthony.

  -----------
  http://anthonyrayner.blogspot.com

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Add a field to a form after you have created a new column in a table

  Hello
  
  I searched extensively in the menus help and tutorials and maybe I missed this, but after you add a new column to a table. How do I change the form so that when the data entered into the form, it is filled in the table? Is there a tutorial or an explanation of the process somewhere?
  
  Thank you

  Hello

  This must be done manually, but it's simple. Create a new item of the type you want for example text item, select the list by right-clicking on the region and select Create a Page element. A wizard will start when you select the type you want. Press next and enter the name of the element. for example, P3_LAST_NAME. Press next and enter a name for the element. Press next and select the Source Type as a queried database column. Press the button create.

  It will be useful.

  ----
  Lavenu
  MaxApex accommodation
  http://www.maxapex.com

• Cannot open EM after you have created the field in 11g

  Hi all
  I installed a weblogic server and created a field of the ADF. After that, I am unable to open the EM console. We are able to open the console only.
  Could someone help us solve this problem
  
  REDA

  Hi reda,.

  "em" application gets installed and deployed with SOA suite. Is that what you have installed SOA suite? If not, then you can do it and then create a domain with SOA/extend the current domain to include SOA and then try to access em.

  Kind regards
  Anuj

• Cannot access my user administarator account after you have created a user standerd account.

  Original title: I added my wife on my computer, in doing so, I can not log on microsoft ask me an administratore password I don't have what it is can someone explain this to me please

  When I added my wife on my computer as a standard user, I could not myself on my account, I tried all my names and passwords, but still can, t access when I tried to go back to the way it was before I tried to add my wife microsoft ask an adminisraters password I don't have what it is can someone help me with this thank you

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when you were able to log in.
  8. Plan in advance and create, test and document a spare, even admin account that you have a spare emergency House key.
  9. Create a regular account for your wife.

• Problem when selecting a table after you have created the dblink

  Hello

  We have created the dblink for oracle to sql server and created successfully,

  But while selecting the oracle table, we receive the question below,

  Select * from 'sysdiagrams"@omniyat;

  ERROR on line 1:

  ORA-00942: table or view does not exist

  [Microsoft] [ODBC SQL Server driver] [SQL Server] Incorrect object name

  'sysdiagrams '. {42S 02, NativeErr = 208} [Microsoft] [ODBC SQL Server driver] [SQL

  Server] instructions could not be prepared. {NativeErr 42000, 8180 =}

  ORA-02063: preceding 2 lines of DAMAC

  Please provide us with the solution for this problem.

  Concerning

  Sham

  Hi S27.

  We had the similar problem, and I guess you went to the database MSSQL and verified that the table exists in fact.

  The problem we encountered was that we were in the wrong database on the instance of MSSQL.  I am unsure of your Setup, but if this is your case, you can try either by setting the database default to the ODBC connection to the correct on the instance MSSQL database (can be done on Windows, I'm not sure about Linux), or you can USE the command through the :

  SELECT
       DBMS_HS_PASSTHROUGH.EXECUTE_IMMEDIATE@<> ('USE <>')
  FROM DUAL;
  

  You try your select statement from the DB link.

• Backup and restore create a journal after you have created a System Image?

  Hello. Regularly, I run a backup of Windows, including an Image system, every Sunday nite. Backup of the last nite seems to work normally, except when I look at the last nite WindowsImageBackup, it seems empty. Shouldn't I perceived some kind of error message if the process of the Image of the system has failed? Is a journal written anywhere that describes the backup. If not, how can I determine if it is any good or not. The backup of the user data which took place at the same time seems to be fine. Thank you.

  Backup of the last nite seems to work normally, except when I look at the last nite WindowsImageBackup, it seems empty.

  Mystery solved.  When I right click the selected properties and a folder of images, he showed 0 file 0 bytes. It wasn't until I left clicked on the backup folder to open it that I was able to verify the content. After you open the folder, right click and selecting Properties shows now the 50 GB I expected to see.

• ORA-27037 standby after you have moved the primary files

  I'm under Oracle 11.2 with a physical Data Guard configuration primary and standby on Solaris 10.  Asked me to move all the files belonging to the primary to a new mount point.  This includes the datafiles, tempfiles, ORLs, litigants and the controlfile.  On the main file system files were located on /u07 and are now on /u03.  Pending files are on /u07.

  Here's what I did:

  Cancel managed recovery and stop in standby mode.

  Judgment of the primary.

  A file system has copied on the primary /u07 to /u03.

  Control_files primary init.ora file parameter to point to the new location on /u03 and change log_archive_dest_state_2 = DEFER

  Renamed the primary spfile with a ".bak" then primary would begin by init.ora file.

  Elementary school:

  startup mount;

  Run A SQL script to rename the data files, tempfiles, ORLs and SRls to the new location on /u03.

  ALTER database open;

  Create spfile from pfile;

  stop immediately;

  start-up;  (so primary is now started with a spfile)

  Standby:

  Change these two lines in the init.ora file:

  *.db_file_name_convert='/U03/oradata/mydb/','/U07/oradata/mydb /'

  *.log_file_name_convert='/u03/oradata/MYDB/log','/u07/oradata/MYDB/log_ '

  Note: When Eve was created first, someone created the ORLs with a different name of the primary.  For example, major newspapers are named log1a, log2a and log3a.  The day before, they are named log_1a, log_2a and log_3a.

  Renamed the spfile Eve with a ".bak" then Eve would begin by init.ora file.

  bootable media;

  At this point, I have seen these errors in the standby alert log:

  Errors in the /oracle/diag/rdbms/mydb_stby/MYDB/trace/MYDB_lgwr_27569.trc file:

  ORA-00313: open failed for the members of Group 3, Journal of thread 1

  ORA-00312: wire 3 1 online journal: ' / u07/oradata/MYDB/log3a.dbf'

  ORA-27037: unable to get file status

  SVR4 error: 2: no such file or directory

  Additional information: 3

  ARC3: Started archiving

  ARC0: FROM PROCESS ARCH COMPLETE

  Here are my questions: why is the database ensures looking for online newspapers as they are named in the primary?  (Without the underline in the name)

  Should I have set STANDBY_FILE_MANAGEMENT = MANUAL on the primary and standby and renamed implementing the ORLs in the standby?

  What I ended up doing was closing the day before and rename the ORLs on the filesystem depending on how they are named on the primary.  Then, the day before, I did:

  startup mount;

  change retrieve in database managed automatic standby database using the current log file disconnect from the session;

  Then, on the primary, I did: alter system set log_archive_dest_state_2 = ENABLE;

  Everything looks OK, which means, newspapers are shipped from the primary to the standby and applied on the day before.

  I wonder, what would I have done differently to avoid first encountered this error?  Also, is my valid Eve at this point?  I see no problem in the primary alert log or journal alerts in mode standby.

  Mimi Miami wrote:

  Thank you, CKPT.  Now, I understand my misunderstanding with the log_file_name_convert parameter.  The parameter is used to convert file locations of the ORLs on standby, not the name of the file of the BDL himself, correct?  Knowing this, would it not imperative that the file is named game?  In other words, I can't have an ENT named log1a on the primary with his match on the eve log_1a appointed, right?

  Yes, setting gives way where to redirect the log files, but what happens if the mentioned directory does not exist on the database pending?

  As on previous day $ls ltr - / u07/oradata/MYDB/log_

  When there is no available pending directory as you have not mentioned in LOG_FIILE_NAME_CONVERT then it cannot translate the strings either.

  File names, you can have anything but basically LOG_FIILE_NAME_CONVERT is here to rename the log files if there are in different places.

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• How to update af:listView after you have created a new line

  Hello

  Jdev Version: 12.1.3

  I have a page which I use to keep customers in a table.

  I have a dispatcher Panel in my page. I show the name of Custome in a listview in the left side. This view of the list has the defined properties below.

  selection = single

  selectionListener = #{bindings. IbisCustomersView1.treeModel.makeCurrent}

  Once that one line is selected the corresponding data will be displayed in the right side in a layout of the form. ListView both the formlayout is based on the same EO based VO.

  I added a CreateInsert Button and when the button is pressed, formlayout section gets blank lines, and I can enter the values for the new customer then click Validate. Everything works fine and the data is saved to the database.

  I have 2 questions:

  1. the list on the left side is not getting updated.

  2. I need this list to be refreshed and also show the line newly created under the selected line. (because the right hand side formlayout shows that data only)

  I tried the below steps, but no luck.

  1. set the property partialTrigger of the listView button validate.

  2. partial property to false for the validation button.

  What should I do to get the updated list once a new line is created in the database.

  See you soon

  AJ

  You need to refresh the parent of the element selectOneChoice component.

  Add the lov component inside and pgl and refreshment on the button click.

  Thank you

• problem rotating rectangle (selection of corners) after you have created with the rectangle tool in illustrator

  I use the latest version of the CC of the Illustrator. When I draw a rectangle by using the rectangle tool, I no longer seem to be able to select the corners to resize the rectangle or the cursor turns to a rotate icon when I put the mouse just outside the angle. Now I know that AI rectangles treated CC differently, with the direct rectangles and rounded corners options and the processing area opening automatically. What I was asking and hope is not the case, is if it's that costs that can go right and resize using just the mouse? I know that there is the "object > shape > Expand" option, but having to do whenever I have a rectangle is time consuming and adds and the extra step that was necessary before. I saw a tutorial on Lynda where the instructor drew a direct rectangle in CC AND was still able to resize by grabbing the handle angle «» Anyone know if it's just a setting that I need to start or something even easy, or it is done inadvertently Adobe workflow longer trying to make it easier? And Yes, I have "show encompassing" selected under VIEW.

  MOD indi-go girl,

  I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587