ORA-27037 standby after you have moved the primary files

Similar Questions

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to connect all the image after you have moved the records?

  I have a lot of illustrator files in folder A and each file has tons of images from different folders (B, C, D). All of these files are inside a main root folder.

  Recently I moved this folder to an external hard drive, then all the illustrator files disconnect with the images. Is it possible to connect all these pictures all together instead of recreating a link one by one?

  Thank you!

  you open a file HAVE, when you get the dialog box "cannot find the file related ABC...". »,

  -Check the box 'apply to all '.

  -Click the 'repair '.

  -Navigate to the location of the new ABC file

  All images must automatically be relinked

  You would need to repeat for each file HAVE

• activation after you have moved the hard drive to another computer to office

  I just changed my hard drive a new office when I asked 5 product code part windows xp but for some reason, when I get in it refuses to activate.  someone help?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Note that OEM license CAN be transferred to the new machines for a reason any.

  Note also that the change of motherboards (which is actually what you did) require activation by telephone.

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• Questions after you have moved the directory \temp Win.

  I just got a new computer with a SSD boot drive where programs are installed.  I move the Windows temp directory (Windows 7) to the secondary drive to avoid much of the writing on the SSD drive.  This has caused problems with Photoshop CS6.

  The first problem was the opening of the program.  I would like to get a "cannot open cache file' then 'failed to initialize the cache file".  This was solved by changing the properties to "Run as Administrator".  It works, but dang I get this stupid user control dialog box every time.   The question here is; is there another way to deal with this?

  Second problem.  I notice that I can are more made drag an image from the Win Explorer to the photoshop work area.  I have to go really OPEN the file in the file menu.  I can't even click with the right button on the file and choose open.  Major concern.

  Thanks for any help for this.  I hope that I can't back up the temp directory.  There may be an environmental variable that I can add to Windows?

  Thanks to a bouquet.

  Sue

  Looks like you're updating all the registry entries that point to the temporary directory on the system, and Photoshop was trying to access the old location.

• BlackBerry smartphones recover memory after you have moved the files in Media card

  I inadvertently saved photos and videos to the device memory.  When I discovered this I moved the files on the media card, but the space in the memory of the device was not released, although the image and folders in video memory show no file.  All solutions?   I am running OS 5.

  "Memory" is basically a multimedia card shipped.  It is memory separate from your "Application memory".

  I just want to perform a full backup of the device with Desktop Manager.  Wipe the device in the Options > Security Options > Security wipe.  Then restore the backup.  That will probably bring your memory asks how far it was.

• No Internet access after you have copied the user files on.

  I created a new user account and copied all the files including documents and settings from an old user account.  Before I did I unhid all hidden files and system files.  What I was expecting, it was the new user account should behave exactly like the old user account without problem outside the difference between user account names.

  However, after doing this I couldn't Internet new user even account I could ping all web Internet sites I've tried.  Finally, I have to create another user account and copy only the document and manually I have to redo all the personal settings.

  If the problems were gone.  However, I would like to know if it is a problem to copy personal settings.  What is the most efficient and effective way to transfer the account from one to the other?

  Hello

  Did you remove the following files on the new account?

  • Ntuser.dat
  • Ntuser.dat.log
  • Ntuser.ini

  http://support.Microsoft.com/kb/811151/en-GB

  The link above shows how to copy a profile, however as far as the most effective way of copying, it depends on what you want, that is to say some parameters can be set for all users of the computer local strategies etc. If you want documents available to all users, use an all the "users share" with the permissions to prevent some accounts, editing files. This may or may not be what you want to achieve.

  Please confirm what data/files/personal etc settings you want to duplicate to the new user accounts, and state what - this time when creating or on an ongoing basis.

  Finally you use XP Home or Professional?

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Performance issues because I don't have any volume in my system after you have removed the infected files

  I have a few files that were infected so I deleted them. Now, I don't have any what volume in my system please help or direct me to a program that I have to reinstall thanks in advance!

  You will need to tell us more about your system and exactly what "I have no volume on my system" means.

  Unfortunately, the implementation of MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Not knowing the basic informations of a problem prolongs the frustration and the agony of these issues, but that's the way they choose to turn things around here.

  Thank you owners MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.

  Please answer the following questions, the better you can:

  What is your system brand and model?

  If you have a Dell computer, what is the Service tag?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, avast! Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If you get an error message, what he said (exactly)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  Do you mean that your system does not any sound at all or do you mean that no longer see the volume control icon in the Notification area (to the left of the clock in the taskbar system)?

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  If you look in Control Panel under sounds and Audio devices and uncheck/check the volume icon to Place in the taskbar and click on apply, you see a message like this:

  

  What do you see iif you click on start, run and in the type box:

  c:\windows\system32\sndvol32.exe

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• Advisior segment showing only not USERS tablespace fregmented after you have moved the image

  All,
  
  OK, I did a simple test to see if the segment oracle Advisor will report whether the tablespace is fragmented or not.
  
  I had a tablespace USERS with about 9000 pictures and took about 2.2 GB in size. I created new tablespace to hold all the images and moved these images of USERS to my new tablespace. After that, I thought that my USERS will be very fregmented, because he settled on 2.2 GB of data. I ran Advisor segment on all areas of storage. However after viewing all DBA_Advisor views he didn't complain of the LOB segments of USERS tablespace.
  
  Am I missing something here?
  
  Thank you

  But still my USERS is fregemented correct?

  What metrics to what value quantifies the 'fragmentation '?

  How can I recover this wested space?

  The space is NOT wasted & there is nothing can be recovered.
  The vacant space will be reused when new data are inserted to the remaining users tablespace tables.

• Mail.app rules prevent any actions after you have moved the message

  If the rule in the Mail.app contains action Message go to any folder, then all the other measures of the rule does not apply automatically. Only if I hit the rules manually.

  If I remove this action, then other actions of the rule will be applied automatically.

  It is similar to the document the behavior, but again, it is a rule in Mail.app, not the rule in the mail server.

  Why is this? Is this a bug? Is it possible to fix it?

  Here's similar question more then there is still no response year: ly http://apple.stackexchange.com/questions/168621/mail-app-rule-works-only-partial

• How do you get KB2686509 to install after you have located the .log file

  I followed the troubleshooting instructions and ran the "Fix [i] t" routine without success...  Windows Update downloads but refuses to install.

  You are not alone!  See this ongoing discussion-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c [22 pages & counting...]

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )