Call - And - Play

Similar Questions

• How to record streaming RTP of Wireshark and play using an application called Audacity

  I use dto this regularly a few years ago and used to know all the steps to get the stream RTP of Wireshark and then save to a file and then play using an application called Audacity.

  In my opinion, were the steps that I used to do:

  1 Wireshark - put in place since a file display server to display only the RTP.

  2 then in Wireshark---> statistical sub---> Show all streams---> and analyze---> then save payload as 'gross' or ' to the ' can't remember - forward / reverse / both

  3 then play the file using Audacity.

  I am clearly stating what I need.

  Now when I do the above I can not read the file with Audacity.

  Audacity says:

  Audacity did not recognize the file type. If it is not compressed, try to import using "Import Raw".

  We must continue to use them to remember the steps.

  Any help much appreciated.

  If the RTP stream uses G.711, you can directly use the audio player of wireshark:

  -in Wireshark - telephony - Voip calls

  -Select a call - then click the reader button

  -Click the Decode button

  -Select one or more streams of data and so click on Play

  

  You can also use RTP analyze tool to record audio in .au format and play with Audacity.

  If you prefer to save the file in .raw format, you can open Audacity and import the file in raw mode and specify the codic law for g.711A so or u - Law codec encoding G.711u and therefore equal to 8000 Hz sampling frequency.

  

  Kind regards.

• Plug and Play drivers: Instrument of Identification error (pumps Ultra PHD at Harvard)

  Hi all! I use the LabView drivers to control a unit of Harvard pump 70-3007 and fall on some issues. (I'm controlling through the USB port).

  Driver:

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=16026

  Plug-and-Play site:

  http://www.NI.com/white-paper/3271/en/

  So I downloaded and installed the drivers and made sure that I have ALL the necessary software (USB virtual COM and VISA) installed. I then used teraterm (serial port communication software) to make sure my computer can communicate with the pump. He could.

  I then moved in labview, to make sure that my computer can control the pump. He couldn't. As soon as I try to screw attached with the drivers, I get an error. The first step in each VI is to call an Initialize.VI that makes a 'Identification of Instrumentation' stage, which always generates an error. He tells me that either I have wrong COM port (I assure you, I did not) or that the instrument drivers are not updated. HM.

  Any ideas? Of course, I know probably no one here has used this series of pumps before, so if there is no additional information / screws I can join, please let me know.

  
  

• When I try and play a video or a dvd from my computer crashes.

  OT: Media Player-related problems.

  When I try and play a video or dvd my computer crashes and I have to close, a blue box appears in the upper right corner, saying: I have new applications that can open this type of file, but not how to use them or what they are called or where to find them.

  I down loaded VLC media player but it also refuses to play video clips and DVD and locks the computer as well.

  I don't know much about computers just how to use it for what I need, any help will be appreciated.

  Roy

  Because it was not mentioned, which was the source Image formats with what you are / have been working?
       http://explore.live.com/Windows-Live-Movie-Maker-file-types-FAQ

  If VLC can't play the file, it can be owner or damaged. In addition, VLC should have no problem with a standard DVD playback.

  You can always try to convert it.

  Freemake Video Converter is one of the most recommended video converters to help users to convert their SOURCE of videos in WMV. Freemake Video Converter is extremely easy to use, but there are a few ' opt-out ' the software provided with the installer that makes the user nervous. I created a post to illustrate the process of downloading the application, installation step by step, explaining what options are optional. I have also provided some screenshots on just how it is easy to convert your videos into WMV.

  Link:
       http://goo.GL/iCnfq7

  I hope this helps...

  Kind regards
  Larry

• Need a transcript of Plug - and - Play foot pedal compatibility for licensees / Cancer stricken Transcriber

  Apparently, I need something called a "connector plug-and-play" so I can use my pedals to navigate through a test of medical transcription dictation using Express Scribe for audio and Windows Media Player to the foot pedal. I don't know if I have all that right.  That is this connector, I just plug it into a USB port and where can I get one?

  PS - I'm a medical transcriptionist (through speech recognition and low patient census) try to pass a test to get a job to save my life. I am also a patient suffering from cancer, so I need a job soon because my insurance COBRA spikes to $645 / month in three weeks. Can you help me?

  All the information you need is here.

• Age of error Mythology Gold Edition, "it is a version update of Age of Mythology that is called to play"

  When I try to play Age of Mythology Gold Edition online he said "There is an updated release of Age of Mythology that is called to play" but whne I on "More" and then "update Titans" then it says "your game is up to date" is there a way I can fix this?

  Another post on the forum: try the following suggestion.
  For a correct clean install of the game you must uninstall TT and then uninstall AoM, and then delete the AoM file, then install AoM, then install TT.
  It should work once you've completed the steps above.

  Thank you

  Marilyn

• During a phone call he plays country music, both connected

  I'm sure this has been discussed before, but I can't find an answer. On my T-Mobile cliq when I start making a phone call ist plays a starnge Western song, until he starts rining or connects. Anyway to change this choice of music or turn it off?

  OK, I went to see if there was a way to disable it on the phone itself and I'm not. You can disable if you are registered on the T-Mobile website. But also look for the my account icon on your screens. There will show you your account information and the list of your features. He'll tell caller tunes for $ 1.99. This means its on and you need to call them to fix it. It will take more time to sit waiting as it takes for them to remove it.

• Camera to call and wait for the photo?

  Hello world

  First post on these forums, but I've been lurking here for a while. I have a simple question that can have a simple answer, and I hope someone here can enlighten us on this issue.

  I'm looking to call the camera of my application, I can do it quite easily. In addition, I have a listener of filesystem implemented seeking a .jpg file saved after that the user takes a photo. Here are the relevant lines of code (more or less):

  Listener = new FileSystemJournalListener() {}

  public void fileJournalChanged() {}

  Long USN = FileSystemJournal.getNextUSN ();

  for (long I = USN - 1; i > = lastUSN; i--) {}

  Entry FileSystemJournalEntry = FileSystemJournal.getEntry (i);

  If (input! = null) {}

  If (entry.getEvent () == FileSystemJournalEntry.FILE_ADDED: entry.getEvent () == FileSystemJournalEntry.FILE_CHANGED: entry.getEvent () == FileSystemJournalEntry.FILE_RENAMED) {}

  If (entry.getPath () .indexOf (".jpg")! = - 1) {}

  lastUSN = USN;

  photoPath = entry.getPath ();

  }

  }

  }

  }

  lastUSN = USN;

  }

  }

  UiApplication.getUiApplication () .addFileSystemJournalListener (listener);

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  My problem is I want to access and extract the image from the camera in a way series application, then I would like my request for locking/blocking/wait until what the auditor has identified a new image file. I believe that this is possible, but I'm not familiar with how to do it. In my debugging experience, at least on the Simulator, invokeApplication is threaded (asynchronous) and my request is still ongoing in the background, even if the camera application is active and on the foreground. I tried to add a dummy while loop after the call to Invoke that checks whether my application is in the foreground (using isForeground) but has not lead me on the path.

  I'm working with JDE 4.6.1 and 4.7. Any help would be greatly appreciated!

  Best,

  Wire update

  Hi Peter,.

  Thanks again for your response. I'm really not in one of the videos/images . You can always check my github profile (www.github.com/filmaj), which also contains my range of PhoneGap - it contains the latest code of BlackBerry for our project. In addition, PhoneGap is completely open source and under license by virtue of the MIT, which is pretty liberal, so feel free to grab the code and play with it / use it at your leisure!

  Thanks for the info on the thread of events, which is very insightful. And Yes, almost all PhoneGap runs on the event Thread (except for the recovery of the resource - two resources the application external or local-unit, i.e. the pages html, css, js, images, etc.). It is indeed a difficult situation, but I think I have the solution, but it does not actually the code Java of BlackBerry. I think I can actually solve this problem as soon as the end of JavaScript.

  For context, here's a brief overview / example of how PhoneGap works on a BlackBerry:

  1. developer making an app with PhoneGap called something like navigator.camera.getPicture (success, failure) of JavaScript on the access to its Web site, with the 'success' and 'failure' based on the handles to reminders for image retrieval success or failure, respectively.

  2 some PhoneGap JavaScript wrapper code sets a cookie (document.cookie = "foobar"-call with a particular PhoneGap message format, in this case for the camera.)

  3. We then carry on native code of BlackBerry. Object BrowserField, that displays web application pages and executes the JavaScript Shell, then intercepts this cookie-setting event (via the eventOccured to the RenderingApplication method and Event.EVENT_SET_HTTP_COOKIE event type) and numbers which native device to recover/call feature.

  4. the specific device feature is called and returns a string from a combination of code JavaScript logic and JSON (code object for data transport representation). This string is stored in a Java vector, which is a member of class PhoneGap.

  5. at this point, the cookie-setting event method has finished running, execution returns to the wrapper of PhoneGap JavaScript function. Now, we get the contents of JS document.cookie. As done previously, using the same approach, catch us the event "getCookie" and fill it with the contents of the Java vector we populated earlier. It finally passed into the web page's JavaScript.

  6 back in the land of JavaScript, the last step is to eval() the contents of the cookie, fill data members and call reminders on the right.

  So my solution is to simply ask document.cookie (and therefore indirectly on the contents of the Java vector election) in a defined - for example, every second - interval instead of immediately after the launch of the functionality of the device and only once. In this way, the app will be keep polling the vector object to the new answers PhoneGap and evaluate constantly.

  In all cases, you can not directly solved my problem, but you led me in the right direction! Congratulations to you, Sir!

  Thanks again,

  Wire update

• Asked to make calls and send pictures at the same time. Possible?

  Hello

  its my first post here. I have very little experience working with BlackBerry. I've been playing with 9800 Simulator and some samples provided with IDE 6.0, I serched for slution to my problem with no luck.

  My question is: is at - there a Posibility to make an app, that would have a built-in single-list contacts with multiple phone numbers, will allow to call (with a built-in list contact phone numbers by pressing a button) and take pictures and email them during this call?

  App like this is a request for a doctor - it needs to be as user-friendly as possible, the person who has never used a Blackberry phone should be able to make calls and send photos. The idea is that a doctor during a call with another doctor would be able to take a picture and send it to the person he calls (or other) in order to consult.

  If my explanations are confusing, I will try to write differently.

  Thanks in advance.

  I am not the best person to answer, but if I understand correctly, simultaneous data and voice is possible, but depends on carrier and the type of wireless connection you - I think you need 3 g to do. With this reservation, it seems possible to what you are suggesting.

• Clarification of grid Plug-and-Play (GPnP)

  I lu something on this introduced feature in Oracle 11 g R2 , I have not very clear that you can get When you add a new node to the cluster is configured automatically.
  I understand that using GNS , you can help reduce the cost of Management of IPs et is used with a DHCP server Server GNS sevice . But not if there is more feature that allows for a more powerful Management software in the installation management of ASM or RDBMS instances on the new server cluster .
  
  I would like to pourrait clarify if what is called Grid Plug and play is the GNS ()Grid naming Service) features?
  Or is it more Dynamics Management capacity of ?
  What role the negotiators, alias profile.xml profile file?
  
  Thank you.
  Best regards.
  Arturo
  
  

  Hello, Arturo.

  Negotiators and GNS are independent of each other

  From 11 GR 2 onwards, files with right to vote can be hosted on ASM. And the upcoming ASM to cssd demon. And for the cssd start the cluster needs to access files with right to vote.

  These voting files location information is stored in the profile of negotiators (grid Plug n Play) file.

  GNS, is for the resolution of the cluster name. For customers outside the cluster to find the virtual servers in the cluster, we provide a Naming Service (GNS) grid. It works with any level superior DNS to provide names can be resolved to external customers. DHCP provides dynamic configuration of the IP address of hosts, but does not provide a good way to produce names which are useful to external clients. Accordingly, it has been rare in the server complex. In Oracle 11g release 2 Clusterware (11.2), this problem is solved by providing clusterwares own service name in the cluster and this connection resolution DNS that is visible to customers.

  Ref: DNS and DHCP configuration example of Infrastructure of grid GNS (Doc ID 946452.1)

  Kind regards

  Vautrin - Oracle

• Show/hide the problem and playing of the symbols

  Hello.

  I have a problem with the instructions Show/Hide and play - my problem here:

  I have 4 buttons (symbols) in the stadium: "sectionOption1a_Btn", "sectionOption1b_Btn", "sectionOption1c_Btn" and "sectionOption1d_Btn".

  I also, what I call, 4 'options': 'Option1a', 'Option1b', 'Option1c', 'Option1d'.

  Each of these symbols of 'Options1X' have a 'melted' and 'melted' animation - 0 ms and ms 2000, respectively (within them).

  Each button runs each own option:

  "" 'sectionOption1a_Btn' ' CLICK ' symbol 'Option1a' tracks

  "" 'sectionOption1b_Btn' ' CLICK ' symbol 'Option1b' tracks

  "" 'sectionOption1c_Btn' ' CLICK ' symbol 'Option1c' tracks

  "" 'sectionOption1d_Btn' ' CLICK ' symbol 'Option1d' tracks

  All "Options1X" are hidden, except one that is active.

  The problem:

  Let's say I have "Option1c" active and I want to go to the "Option1a". So, I click on "sectionOption1a_Btn". When I do this, I want the "Option1c" to run is "bland out' (inside himself, to 2000 ms) and then run " Option1a" 0 ms - it is own"fade"while keeping all the other "Options1X" hidden, of course."»
  

  I hope that I didn t more complicated my explanation.

  Here´s a schema:

  

  Thanx.

  Hi there, you can implement such a feature in 2 tracking variables. YER essentially saying 'currentOption' to unfold on click of a button and the definition of the "requestOption" according to the click button. At the end of the coast anim current outro, yer by calling the 'playRequest' function to play the requested side.

  Put this question to the stage.compositionReady event:

  var currentOption = null; / / a, b, c and d

  var requestOption;

  called by the event of timeline.complete at the end of each Option

  sym.playRequest = function() {}

  sym.getSymbol("Option1"+requestOption).play ("is");

  currentOption = requestOption;

  }

  called when the button is clicked

  sym.btnClick = function (request) {}

  requestOption = request;

  {if (currentOption)}

  sym.getSymbol("Option1"+currentOption).play ("fadeOut");

  } else {}

  sym.playRequest ();

  }

  }

  Put this on a button click:

  sym.getComposition () .getStage () .btnClick ("a"); / / or b, c and d for each button

  Put this question to the event timeline.complete of each Option symbol:

  sym.getComposition () .getStage () .playRequest ();

• How this effect is called, and is therefor in AE?

  Does anyone know this effect?

  It is greenscreen.

  And how is the effect called, and it is in Adobe AE CS4?

  Or first.

  I use Mac and Windows.

  http://img42.imageshack.us/img42/6929/effectt.PNG

  It's a gradient layer of race burst style simple. You cannot apply in AE, but if you import a Photoshop file that has it, the style will make correctly even in AE it may be copy & pasted on other components. Anotehr way would simply use Glow, mounted power intensity and play with the colors of A and B, and the cycle repeats. A refined method would be to use the glow in its elemental form, but then apply Colorama to achieve several regions of color.

  Mylenium

• Jump to frame and play in the separate film

  I have two completely separate .swf files loaded into a web page. MovieA.swf is called to play on the charge and movieB.swf has the value be arrested on the charge.
  
  With the click of a button in movieA, trying to get movieA.swf to say movieB.swf to go to a certain slice and play.
  
  I searched Google for hours now and not really found something that works.
  
  Within movieA I tried the following:
  
  on (release) {}
  gotoAndPlay ("_root.movieB", "15");
  }
  
  OR
  
  on (release) {}
  gotoAndPlay ("movieB", "15");
  }
  
  When I do that it just seems to play movieA. Note that I have also found a way to "appoint" a film. So I ask just the name of the file (movieA.swf) and I know it's probably not accurate.
  
  It seems this would be a common thing to do... someone has any code that might work?
  
  Thank you
  Raym
  
  
  
  
  

  "raymbarr" wrote in message news:[email protected]...
  > I have two completely separate .swf files loaded into a web page.
  > MovieA.swf is called to play on the charge and movieB.swf has the value be arrested on the charge.
  >
  > On the click of a button in movieA, I'm trying to get movieA.swf to say
  > movieB.swf to go to a certain image and play.

  If they are separated on the web page (not one charge by the other) then does not allow code in one to refer to the other, except
  Thanks to a code linkup called localConnection.
  There are a few examples of localConnection on my site...

  http://members.Cox.NET/4my2dogs/Flash/
  tralfaz

• Pause and Play Button Switch

  I can't understand how to move the pause and play button without using the timeline (two frames). I need to use ACE (2), but for some reason that I can't see the buttons to swapDepths no matter what variation I use. I tried referencing the file in the () and referenced posts depth (-3). Is there another way to call the pause and play button to switch when they are released?

  Invisible buttons do not respond to the mouse (I should say, buttons set _visible = false).

• Can't do out calls and incoming calls go straight to voicemail

  Cannot do out calls and incoming calls are directed to voicemail

  See If you can not connect to a cellular or cell - data Apple Support Network.

  TT2