call the exe file

Similar Questions

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  

• How do you call the .mst file in the the Deployer to exception command line? (Acrobat Pro CC)

  To implement a conditioner creative cloud deployment of Acrobat Pro, I wanted to include the changes made by the Customization Wizard, as described here:

  http://helpx.Adobe.com/creative-cloud/Packager/deploying-Acrobat.html

  When I deployed earlier versions of Acrobat, I simply added in Transforms = filename.mst to the command line so that the changes take effect. With creative cloud conditioner and Deployer of Exceptions command-line syntax, I'm not clear on how to call the .mst file during installation. Is it still possible?

  Currently, I use the following two commands:

  • exceptiondeployer.exe - workflow = install - mode = pre - installlanguage = en_US
  • MsiExec.exe /i Acrobat_x64.msi

  While normally I would add the syntax to turn to the second command, it does not seem right in this case that the transformation is a change of the MSI, which is part of the folder 'exceptions '.

  Hi sszczygiel,

  Please try this command instead of deployeur Exception

  "MSIEXEC /I TRANSFORMS = \AcroPro.msi"\AcroPro.mst "/ SB

  Please let us know if it helps.

  Kind regards

  Abhijit

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• Impossible to download whatever it is, said "windows could not open the exe file.

  Once I had deleted all my music in win.med.player. sence then I can't download/open/save everything that is associated with one, "-.» File "EXE" or binary.? " Help, please.

  Hello

  1. what operating system do you use?

  2. it happens with all the exe files?

  3. What are the files he did remove WMP?

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  You are unable to start a program with an .exe File Extension (applies to Windows XP)

  http://support.Microsoft.com/kb/310585

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• Windows cannot find the program to open the exe file

  I did the windows repair option by restarting then pressed f8 to get to come repair options. I did it to try to remove a number of problems of virus on my laptop. It seems that it has solved the problem, but now when I try to access one of my desktop icon shortcuts it indicates that windows cannot find the program to open the exe file. She does it with every shortcut. I can access the location of the program and then select open with and it will be opened in this way, but there is not and I have to select each time. Another option that works is a right-click on the icon and selecting 'start' and who will run the program properly. Other than simply double-click the icons automatically no longer works since I did this repair.

  Windows Startup Repair fixed my problem, but now my desktop icons not properly opens with double-click

  Hello

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Now search for the question.
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Lost on the *.exe files file associations

  I am running Windows Vista Ultimate 32 bit. After trying to install a new program MYOB, all *.exe files were replaced by 'Open with Myob', I manually edited a large number of changed properties, but most often when I try to run a file, it asks what program you want to open the *.exe file relevant, I don't know how to find what program he claims.

  I tried to do a system restore without a bit of luck because when I try to launch it by opening the file rstrui.exe but it asks which program I want to open it, so I'm back to square 1. I'd appreciate any help I tried to solve this problem for four solid days.

  Give a this tutorial from Microsoft Support. It consists of a "fix it for me" application and a "I'll fix it myself" instructions.
  http://support.Microsoft.com/kb/950505

  If the failure of the above, take a look at the response given by Zack, moderator, in one of the previous discussions, as well as fold them another who had a solution that was declared a response by a poster. Just read this:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/16be61fe-76ef-4b91-9F60-3338cbcefb97

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Is that we can run all the EXE files in silent mode?

  If yes how we specify the configuration (our entries in a normal graphical installation).

  My need is that I have the exe file I want to run through cmd script or batch.

  now how can I specify the entries in command line or a batch script

  or do Fund of any separate file to store these values

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Cannot open lightroom6. I can't find the ".exe" file

  I bought lightroom 6 (upgrade version).

  in vain during the download I download the file.

  Download again I found the lightroom file in the home page.

  ()

  but this type of file is not the ".exe" file I can't install the thie file.

  How can I get the file ".exe"?

  Download again

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

• Stop the .exe file to be checked in WCC

  Hi all

  I have a few question:

  (1) everyone knows how can we prevent a user from logging in the .exe file in Oracle Webcenter content 11.1.1.8. ?

  (2) by SAY if I checked in an email, another user should not be able to push the same email?

  Because everyone has worked on this before please give me a solutions or suggestions.

  Best regards

  Elena

  Your activation condition must be changed.

  ((dpEvent comme «OnSubmit» ou dpEvent comme «OnImport») and)

  (dpAction as dpAction as "CheckinNew" or "CheckinSel"))

  I have tested this before posting this reply, and the consignment fails as expected.

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• I can't find the exe file to install manually.

  My drive does not load ready for installation, I can't find the exe file to install manually. can anyone help please.  Thank you very much.

  Download Photoshop Elements products | 10, 11, 12, 13

• I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Please help, I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Hi Francis,.

  Make sure you download both files from there. https://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  Compare the size of the file and you will have to perhaps disable all anitvirus during download and install it.

  Thank you

  Scott

• After downloading CS6, I try to open the .exe file and I get only a text file.

  I'm on a MacBook Pro and I have followed all the instructions, downloaded the Akamai Download Manager, and then the giant 4.79 GB download began.  When it was over, nothing happened, so I clicked on the DesignWebPremium_CS6_LS16.exe and a file in TextEdit keeps opening.  Without Akamai, no installation, nothing.  Then I clicked on the other file downloaded (giant) and I was prompted to choose an application to open.  I sailed the Akamai NetSession and after a long pause, I git a dialog box telling me that Akamai is unable to open this type of file.  I erased my downloads and re-uploaded a couple of times and continues to be the same thing.

  Hi aslalsdkg,

  Please make sure that you have downloaded the correct file as it seems that you have downloaded the file for Windows.

  The .exe file is intended to be run on Windows. MAC Installer has the .dmg extension

  Try to download the software from the direct links on the page: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  But make sure you follow the instructions mentioned on the page before you start the download.