Stop the .exe file to be checked in WCC

Similar Questions

• Impossible to download whatever it is, said "windows could not open the exe file.

  Once I had deleted all my music in win.med.player. sence then I can't download/open/save everything that is associated with one, "-.» File "EXE" or binary.? " Help, please.

  Hello

  1. what operating system do you use?

  2. it happens with all the exe files?

  3. What are the files he did remove WMP?

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  You are unable to start a program with an .exe File Extension (applies to Windows XP)

  http://support.Microsoft.com/kb/310585

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• Windows cannot find the program to open the exe file

  I did the windows repair option by restarting then pressed f8 to get to come repair options. I did it to try to remove a number of problems of virus on my laptop. It seems that it has solved the problem, but now when I try to access one of my desktop icon shortcuts it indicates that windows cannot find the program to open the exe file. She does it with every shortcut. I can access the location of the program and then select open with and it will be opened in this way, but there is not and I have to select each time. Another option that works is a right-click on the icon and selecting 'start' and who will run the program properly. Other than simply double-click the icons automatically no longer works since I did this repair.

  Windows Startup Repair fixed my problem, but now my desktop icons not properly opens with double-click

  Hello

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Now search for the question.
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• When I run the exe file, it should load the niscope_32.dll why?

  Hello:

  I used scope in my program functions,

  and then I did it in the exe file and the installation file,

  but when I make them to another computer,

  To load the niscope_32.dll, what should I do?

  Hi ylongwu,

  You will need to install the driver OR-Scope on the deployment computer so that the code you can call the driver. You can download the driver from our Web site at drivers and updates the link below by searching our driver OR-Scope and choosing the appropriate version. I also recommend that you include the NOR-Scope driver as an extra Installer for your executable. In the setup of window construction there is a category called additional installers where you can choose the drivers and execution engines to install with your executable file. I've included a screenshot to show what it will look like for LabVIEW 8.x.

  Drivers and updates
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• Lost on the *.exe files file associations

  I am running Windows Vista Ultimate 32 bit. After trying to install a new program MYOB, all *.exe files were replaced by 'Open with Myob', I manually edited a large number of changed properties, but most often when I try to run a file, it asks what program you want to open the *.exe file relevant, I don't know how to find what program he claims.

  I tried to do a system restore without a bit of luck because when I try to launch it by opening the file rstrui.exe but it asks which program I want to open it, so I'm back to square 1. I'd appreciate any help I tried to solve this problem for four solid days.

  Give a this tutorial from Microsoft Support. It consists of a "fix it for me" application and a "I'll fix it myself" instructions.
  http://support.Microsoft.com/kb/950505

  If the failure of the above, take a look at the response given by Zack, moderator, in one of the previous discussions, as well as fold them another who had a solution that was declared a response by a poster. Just read this:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/16be61fe-76ef-4b91-9F60-3338cbcefb97

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Is that we can run all the EXE files in silent mode?

  If yes how we specify the configuration (our entries in a normal graphical installation).

  My need is that I have the exe file I want to run through cmd script or batch.

  now how can I specify the entries in command line or a batch script

  or do Fund of any separate file to store these values

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Cannot open lightroom6. I can't find the ".exe" file

  I bought lightroom 6 (upgrade version).

  in vain during the download I download the file.

  Download again I found the lightroom file in the home page.

  ()

  but this type of file is not the ".exe" file I can't install the thie file.

  How can I get the file ".exe"?

  Download again

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• I can't find the exe file to install manually.

  My drive does not load ready for installation, I can't find the exe file to install manually. can anyone help please.  Thank you very much.

  Download Photoshop Elements products | 10, 11, 12, 13

• I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Please help, I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Hi Francis,.

  Make sure you download both files from there. https://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  Compare the size of the file and you will have to perhaps disable all anitvirus during download and install it.

  Thank you

  Scott

• After downloading CS6, I try to open the .exe file and I get only a text file.

  I'm on a MacBook Pro and I have followed all the instructions, downloaded the Akamai Download Manager, and then the giant 4.79 GB download began.  When it was over, nothing happened, so I clicked on the DesignWebPremium_CS6_LS16.exe and a file in TextEdit keeps opening.  Without Akamai, no installation, nothing.  Then I clicked on the other file downloaded (giant) and I was prompted to choose an application to open.  I sailed the Akamai NetSession and after a long pause, I git a dialog box telling me that Akamai is unable to open this type of file.  I erased my downloads and re-uploaded a couple of times and continues to be the same thing.

  Hi aslalsdkg,

  Please make sure that you have downloaded the correct file as it seems that you have downloaded the file for Windows.

  The .exe file is intended to be run on Windows. MAC Installer has the .dmg extension

  Try to download the software from the direct links on the page: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  But make sure you follow the instructions mentioned on the page before you start the download.

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• EPICS PV does not work in the exe file

  Hi all. I'm using LabVIEW 2011. I tried a simple application to post a TICKET to a server of EPICS. Everything works fine when I start the application inside LabVIEW. The problem occurs when I build an exe. When the exe is running that I can see the shared variable update in System Manager OR distributed, but the PV VAL field continues to show no known value. If I click on the button inside EXE, run the application inside LabVIEW, stop the application in LabVIEW a press the button run in EXE, then PV guard normally implemented to date.

  VI application:

  

  Project organization:

  

  The EPICS server configuration:

  

  Build configuration Variable in common:

  

  Result EXE running (shared variable values update, but no EPICS PV):

  

  Strategic outcome running inside LabVIEW (Ok):

  

  Marciodo,

  I think that the suggestions of Abel are very good. Based on your description, it seems that your library is not deployed when you run in exe despite the fact that you have checked it in the build specification.

  I could also try to select "Undeploy shared variable libraries at the exit of the application" and see what happens.

  If this does not work then I would implement a deployment of library stripped. Which is also covered in the KB Abel shared earlier.

  Just curious, you are everything (exe and vi) tests on the same computer? Is LabVIEW project open while you run your exe? I don't think that it matters but curious to see if it has an impact on your problem.

  Also put a wait function in your while loop so you don't cross your CPU.

  Miro_T