Called program unit is not found
We are facing a problem of development, which, while it is not preventing us from working, but it is seriously slow our progress. It goes something like this...We have a ColdFusion to an Oracle PACKAGE, 'package A' interface ' Package has "called"package B"and"plan B"called"C package ". We are working actively on the "C package", the last of the string and then by testing these changes to the ColdFusion interface.
Whenever we run a CREATE or REPLACE on C 'package (we tried the two compilation as the BODY, and the SPECIFICATION and BODY), we get the following ColdFusion error when we test from the interface:
ORA-06508 PL/SQL: Could not find the program unit being called
If we wait a bit, everything starts working again. Note that while we wait, "Plan C" is not be recompiled. While it works fine. Our best guess is that there is something that past due the connection pooling of the processes in place. Maybe... If you are lucky enough to lock onto a new connection, the error does not appear? But, if you connect to a session which was present at 'C 'package has been recompiled, you will then get the ORA-06508? These connections use a JDBC driver.I guess that I expected to get the error ORA-04061 ("current state of the package has been abandoned"), and which is more rarely than the ORA-06508, but the "could not find program unit" coming is just to stop our efforts until everything starts to work again.
I found some suggestions online (http://www.orafaq.com/forum/t/14555/2/) who claim that the SHARED POOL must be rinsed and that will help with this error, but I'm not sure that I have to wear an atomic bomb to a fight. In addition, these PACKAGES are not huge, so I'm not sure that we will meet the limits of memory is is concentrated on the other posts:
package A: 1533 lines
package B: 1015 lines
c packaging lines: 1842
Anyone has a suggestion for us to follow-up on? As I said, we're not dead in the water, but it becomes quite frustrating.
Thank you
-= Chuck
Have you tried to compile the procedures A & B after changing C?
When you edit a dependent object, Oracle marks the invalid calls objects. When these objects are called, Oracle compiles and runs. Normally, this is all transparent to the user.
However, the problem comes when your framework / library / etc. Decides to be a little too clever and try to describe the object before calling the procedure. Oracle compiles not a not valid object when describe you it, so the framework can incorrectly conclude that there is no A valid procedure when he sees that A is invalid. If blindly, he attempted to call A, on the other hand, Oracle would compile it and run might work.
Justin
Tags: Database
Similar Questions
-
Hello
Version of the EBS: 11.5.10.2
DB version: 11.2.0.3
Version of the OS: AIX 6.1
Under 11.5.10.2 R12.1.1 update, while implementing a merger 12.1.1 upgrade driver (u6678700.drv), we got below error:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ATTENTION: All workers have failed or are pending:
IMPOSSIBLE: folder glsupdas.ldt worker 3.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10: / fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log > tail-20 adwork003.log
Restart the task that failed and has been corrected.
Time, when the worker restarted job: Wednesday, August 7, 2013 10:36:14
Loading data using FNDLOAD.
FNDLOAD APPS / * 0 DOWNLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -.
Connecting to applications... Successfully connected.
Call the function FNDLOAD.
Returned by the function FNDLOAD.
Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log
FNDLOAD of error function call.
When the worker has no time: Wednesday, August 7, 2013 10:36:14
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10: / fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log > tail-20 US_glsupdas_ldt.log
Current system time is sea Aug 7 10:36:14 2013
Download from data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt
Changing environment NLS_LANGUAGE AMERICA database
Dumping from the LCT/LDT files (/ fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to the staging tables
Dumping file fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0 LCT) in FND_SEED_STAGE_CONFIG
Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt in FND_SEED_STAGE_ENTITY
Dumped the lot (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS, GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS) in FND_SEED_STAGE_ENTITY
Download of the staging tables
Error loading of seeds for GL_DEFAS_ACCESS_SETS data: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: called program unit is not found
Simultaneous request ended
Current system time is sea Aug 7 10:36:14 2013
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello
Please, recreate the specification and body of the respective package and try:
-Navigate to $GL_TOP, patch, 115, sql
-Connected as a user of the applications.
sqlplus Oracle@Amazon sql apps]
SQL * more: version 10.1.0.5.0 - Production Wed Aug 7 13:53:33 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter the password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL > @glistdas.pls
Addition of PL/SQL package for gl_defas_access_sets_pkg specifications
Package created.
Validation complete.
...
..
SQL > @glistdab.pls
Addition of the PL/SQL package for gl_defas_access_sets_pkg body
Package body created.
Validation complete.
See if this helps you, validation of the object.
Better subject.
-
ORA-06508: PL/SQL: called program unit is not found
I found this error in a project and I was confused as the program unit is there, but the error indicates the program unit is not found. So I'm googling and find an answer here oracle - ORA-06508: PL/SQL: could not find program unit called - Stack Overflow where a packet can be stateless or stateful after recompilation. I wonder, the idea of the package is we can change the package body and compile without the need to compile the package specification if the specification is not changed. If I compile them both, it will be fine, no more error, but I need compile the client application - form of Oracle.
My question is:
1. as the variables, constants, and the sliders that declares a package create the State (as explained in the link above), when should I use?
2. why the error information correctly? I mean why not... say something like... "the package is with State..."
Thank you
regard, ib
1 use them when you need to use - that is what really you ask?
2. like the other article says that you probably never gave us the last exception to a trace. What does "I found this error in a project" mean? You won't "find" exceptions - Oracle reports. If show details of how the code was executed and all of the exceptions as Oracle supplied ALL participate.
Package plug most will include the constants and cursor statements. That rarely only functions/procedures will be declared. In General, do NOT recomiling/change packages in production environments.
But if you do then you'll probably apps that do not as you describe. As doc says Oracle quotes will be implicitly recompile time code first (although still have reported that initial exception) so that the references are not lacking.
-
Error: ORA-06508: PL/SQL: called program unit is not found
Hello
I was surprise issue while testing my code from Oracle. Let me explain first of all the details of the environment. Our application built
Java/J2EE (Weblogic) and backend is Oracle 11 g re2. Calling Java call through different users who have been providing
synonymous with option and running for corresponding procedure.
I created the EXTRACT_CUSTOMER_INFO_PK package which exract data from file text with UTL_FILE (direcory, UTL_FILE grant is provided to the user to DB).
Now this package was called rp_execute_procedure_pr - I have here is the code
CREATE OR REPLACE PROCEDURE RP_EXECUTE_PROCEDURE_PR
(
i_atlas_job_schedule_fk IN atlas_job_schedule.atlas_job_schedule_pk%TYPE,
i_job_id IN atlas_job.job_id%TYPE,
i_parm_value IN atlas_job_schedule.parm_value%TYPE,
o_status_code ON the NUMBER,
o_status_mesg OUT VARCHAR2
)
IS
-Other older code that is not relevant to this problem-
-Other older code that is not relevant to this problem-
-The code below, I added-
ELSIF l_job_id = "CUST_EXTRACT" THEN
EXTRACT_CUSTOMER_INFO_PK.customer_report (i_parm_value,
o_status_code,
o_status_mesg);
-o_status_code: =-99999999.
-o_status_mesg: = "PARTHA PARTHA PARTHAcess arrested!";
ON THE OTHER
o_status_code: =-20300;
o_status_mesg: = ' Job Id: ' | l_job_id | ' Not found. Process is completed!';
END IF;
update_log_auto
(
ajs_rec.atlas_job_schedule_pk,
' Treatment time (GMT) of the end: '
);
EXCEPTION
WHEN eProcError THEN
o_status_code: = SQLCODE;
o_status_mesg: = SUBSTR(vMsg ||) e -'|| SQLERRM, 1, 200);
WHILE OTHERS THEN
o_status_code: =-20300;
o_status_mesg: = SUBSTR (SQLERRM, 1, 200);
update_log_auto
(
ajs_rec.atlas_job_schedule_pk,
' Error: '. SQLERRM | » '
);
update_log_auto
(
ajs_rec.atlas_job_schedule_pk,
' Treatment time (GMT) of the end: '
);
END RP_EXECUTE_PROCEDURE_PR;
Now he compiled sucesfully. And while I SAT RP_EXECUTE_PROCEDURE_PR then run fine and extracted txt file. But while I called him procedural Java it gives us the error as
Error: ORA-06508: PL/SQL: 13:16:51 August 2, 2012 called program unit could not be found.
Like I said RP_EXECUTE_PROCEDURE_PR old proc and used by the other proc, so I first think question is newly added code or maybe a few grants or synonym (although it should not be)
So I created public means amd gave run grant to my public pkg.
But he repeated the same mistake.
I have a lot of R & D on my package but nothing happen. Finally I have my new pkg RP_EXTRACT_CUSTOMER_INFO_PK remane and it works fine
I need to know what is the RCA for her. I donot think any problem as renaming pkg dependecy works very well.
NB my user DB iATLAS and Javauser is SUDEEP
Thanks in advance
Martin PaivaName conflict usually occurs because there is another object with the same name: could be it is even a java package name and plsql package package or could be same name from a different scheme.
First of all, try to use the fully qualified name: myschema.mypackage.myprocedure
-
"ORA-06508: PL/SQL: called program unit could not be found.
Hi all
I'm not able to run a map after deployment. It is said "ORA-06508: PL/SQL: called program unit is not found" any help is greatly appreciated.
Also I get the error message of smart recovery: orphan treats when I m trying to log on in the morning. It is said to kill the process using Alter kill, but the problem is not resolved. Kindly help me.
Thank youHello
Without the instructions I canoe tell u anything. But that is the problem, why you have found a problem in the map. The package must be corrected first. I think it is just a syntax issue anyway. Try to use PL/SQL expert to get this resolved or mailed the package here, and I'll have a look.
Concerning
Bharath -
missing Windows Sidebar. C: Program Files Application not found.
10 days ago everything worked fine, but now even if I want to customize my dock or I use D T the Application C:/Program Files etc not found keep appearing. Also, whenever I click on Google Chrome or IE etc etc, I get a box popping up that are asked to choose a program I want to open the file... Sidebar is gone too. Help!
Hello1. don't you make changes before the show?As you have several questions on the computer, we recommend that you restore the computer to an earlier time when it worked very well for this problem. To restore the computer to an earlier time, try the following steps.
1. Click Start, type system restore, click System Restore in the list.
2. choose the appropriate date when the computer was working fine.
3. follow the instructions in the wizard to complete the system restore process.
4 restart the computer and check if everything is OK.For more information about system restore, see this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreWe also recommend online virus scanner to delete all computer infections: http://onecare.live.com/site/en-us/default.htmI hope this helps.Kind regards
Syed
Answers from Microsoft supports the engineer. -
Program unit could not be found: OE_Order_PUB. Process_Order
Hi friends,
My Appl version: 12.1.3
I tried to write an anonymous block for process control. I used the script under Doc ID 746802.1. I just changed the quantity and the Line_id.
I get the message below:
BEGINNING OF THE NEW DEBUG
OM file debugging: /sqlcom/outbound/l1009061.dbg
message: ORA-06508: PL/SQL: unit of program being called in the package OE_Order_PUB procedure Process_Order is not found
message index is: 1
Amount of line update failed
version OE_Order_PUB:
/ * $Header: OEXPORDB.pls 120.14.12010000.10 25/02/2011 09:41:40 snimmaga ship $ * /.
Am I missing something? Has anyone found this problem and solved it?
Hi Laurent,.
Please check for invalid objects of the same, as the likely reason is due to invalid objects.
Have a review on the notes:
Sale order form ORA-06508 PL/SQL could not find program unit called in the Package OE_ORDER_PVT OEXOEORD.fmb of invalid objects (Doc ID 1319400.1)
ORA-06508 PL/SQL did not find program unit called in the package Oe_order_price_pvt (Doc ID 285225.1)
Thank you &
Best regards
-
PL SQL program unit does not compile with cursor for UPDATE NOWAIT
All,
I am trying to use a cursor for UPDATE NOWAIT to avoid hung sessions on the shape of the front end.
I am using a syntax such as:
CURSOR my_cur (p_val)
IS
SELECT 1
FROM my_table
WHERE my_col = p_val
FOR UPDATE NOWAIT.
However, later in the procedure, when I try to refer to the cursor with the following syntax:
(after opening/get the cursor...)
UPDATE my_table
SET my_col2 =: MY_BLOCK. FOO
WHERE CURRENT OF my_cur;
I get the following compilation error:
Error 404 on line 140, column 30
cursor 'MY_CUR' must be declared with to use with the CURRENT UPDATES OF
The strange thing is that if I remove the "NOWAIT" keyword, the program unit compiles.
If nothing else has noticed this? No workaround or patch solution? Is this a known bug?
Thank you very much
-ChrisTry one
FOR UPDATE OF ID NOWAIT;
where ID is the name of a column in the table.
-
'free' for IM32FAX programs. DIL not found error
all the fix he progams that I found microsofts inclunding to correct my error IM32FAX. DI Lproblems claim that they are free, but you must register for them to work that requires a tax im not happy and don't want to pay for this kind of pproblem, suggestions?
It is unlikely that these programs would solve a problem like this.
This file is part of the Lexmark Fax Solutions. If you have problems uninstalling and installing this program, contact Lexmark email free advice using the links on their website http://www.lexmark.com
-
Cannot remove to add or remove specific programs they is not found
I can't delete some programs (add and remove) they fill in the add and remove program but when I try to remove a mess appears who says it cannot be located? What should I do? I can update the programs because it is said that that won't come off?
Hello
What are the programs you want to remove? Try to download CCleaner from http://www.piriform.com/ccleaner and uninstall unwanted programs.
I hope this helps.
-
"Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.
Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.
Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.
You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.
Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat
If the problem persists ask please check with another user account.
Kind regards
Christian
-
Original title: difficulties to open programs
I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.» My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program. How can I solve this problem?
Hi JenniferAS,
1. is the issue limited with a particular program?
2. what operating system is installed on the computer?
3 did you changes to the computer before the show?
It is a file associated with a program called Tune Up Utilities 2010.
Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.
Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.
Step 1: Uninstall tune-up Utilities 2010.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Step 2: Re-install tune-up Utilities 2010.
Download tune-up from here:
http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe
Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
Let us know if that helps.
-
After you have created a restore point , I used the program called Decrapafier deleted some programs. Then asked me to "revive"! Then restart "Welcome" rises and then immediately followed " explore. EXE - the 423 ordinal could not be located in the dynamic link library urlmon.dll. " "Ok" and then when I hit ','OK'' the paper wall windows screen comes up, and I can't go out this screen unless I'm goingtask responsibleand then go to google chrome (my browser), it is listed under the heading"new heapk''... " 'Browse''... '' Desktop"! If I try... ANY.. another task... it happens that... "Manager of the tasks-423 ordinal not found". I can't to anything except my google chrome "aol" in the home page . Once I'm there, I can go to any site I have previously book marked. I can also access to and use "google search '' from there I can download but will not open the downloads! And I always get the same answer... "423 ordinal not found ''! "No matter what I try - always the same answer-'"ordinal 423 is not found in the dynamic link library urlmon.dll."." If you can help please email me at * address email is removed from the privacy * or better send me your phone number and I'll call you A.S.A.P.Sincerely yoursJack OlivaI went back to a restore point restarted and now I tried all modes (safe... etc.) I can't get to my sites in master (Ctrl-Alt-Delete), and then in the office and bookmarks on my 3 browsers in mode "master" task... I CAN get the Safe Mode cursor! Who can help me?
Did you do research on this issue - as some searching on Google?
Popular ideas that seem to be fruitful for the situation you describe revolve around a problem after installing IE8.
What seems to have worked for people with this problem is to start in Safe Mode, start the Task Manager, click file, new task, and in the type box:
appwiz.cpl
Click OK to open Add/Remove Programs, uninstall IE8, restarted (if everything goes normally) and then reinstall IE8 (if that's what you think what you need).
It is strange that of many examples I found this problem on the Internet where people actually correctly solved the problem, not a single one of them used any of the ideas offered here by Microsoft support engineers.
Maybe the Department of Education look on the Internet for solutions to these problems - they just after their usual ineffective methods of trial and error... Check this or that, try Safe Mode, see if it can help, boot, etc.
I'm surprised that there is no a sfc/scannow in there somewhere!
-
Blue screen: c000021a autochk program not found
original title: program autochk not found - skipping AUTOCHK "Followed by BSOD" STOP: c000021a {fatal system error} Session Manager initialization of the system responding ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)
Hello everyone I am desperately need assistance. I'm running under Windows Vista Home Premium 32 bit SP2. The computer is a HP Pavilion Media Center TV PC m7680n. About 5 days ago my antivirus software, Avira, picked up a malware infection at the site of Windows/System32/drivers/mountmgr.sys. Like a fool, I decided to delete the file and call it a day, but the second that I made my computer immediately deleted and I was forced to close. When I started again, I was greeted with this error message 'autochk program not found - skipping AUTOCHK', which was then followed by a container BSOD:
STOP: c000021a {fatal system error}
The Session Manager initialization system process ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)Since then, I tried to boot from any available including the last known configuration safe mode options but I am confronted with the same BSOD and error message and am not able to access the desktop. I also tried all of my drive to Installation of Vista startup repair options, but it says it cannot determine the cause of the problem.
I also tried to use system restore but it is said that "no restore points were created on your computer's system disk.
I also tried using the command prompt and enter the command chkdsk with all the options available, but it cannot detect errors or problems. I also tried to use the Bootrec command with all available options, including the reconstruction of the BCD from scratch, but that no longer works. I also tried to use the sfc/SCANNOW command but it cannot start because I get an error message indicating that "Windows Resource Protection could not preform the requested operation." I also tried to replace the file mountmgr.sys since a separate installation of vista through the command prompt by using a floppy disk, but alas it does not solve my situation.
There are a lot of files and personal information about this computer that I consider valuable for me so please give as much advice and guidance as you possibly can which can help save my OS without having to wipe everything. Also, it's my first time in this forum post, so if I've left out any important information so please let me know and I'll try to give it too you. By the way, I am also what you would call an extreme novice with these sorts of things so be as complete with your descriptions as possible. Thank you.
Hello
Go back and use the troubleshooting guide I posted above - top to bottom. And indeed will need you
technical help in a real store of the computer (no leeks and glances at a BestBuy or other BigBox
stores) or system manufacturer support.Startup Repair can help.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
"Row not found" when you call setCurrentRowWithKey on a view 'offline '.
Hello.
I use JDeveloper 10.1.3.4. I can see 'offline' with lines populated by program, not based on a query. It has an attribute of type number marked as Key attribute and this.setManageRowsByKey (true) in the Create method of the ViewObjectImpl class. When I try to call setCurrentRowWithKey I get the ' oracle.jbo.RowNotFoundException: Houston-25020: line of sight from the main oracle.jbo.Key [23540] not found in PozitiiIntrariVwIterator) "exception.
When there is no key atrribute this point of view and not setManageRowsByKey (true), I don't get this error, however, when you run the following code, I get an error:
Set of keys to the value = this.getTblPozitiiIntrari () .getSelectionState () .getKeySet ();
Iterator keyIter = keySet.iterator ();
While (keyIter.hasNext ()) {}
_Key key = (Key) keyIter.next (); -> java.lang.ClassCastException: java.lang.Integer
What I am doing wrong? What can I do to get the app works on both cases?change key (Key) = keyIter.next (); = (Integer) keyIter.next () key whole;
tableComponent.setRowKey (_key);
Object ViewObjectClassName = tableComponent.getRowData ((ViewObjectClassName));
Maybe you are looking for
-
Can I do my Equium L20 - 197-run faster?
Hello world Can I do my Equium L20 - 197-run faster? I am not very good with pc - then do me in terms simple, lol Thanks in advance M
-
Hello Recently, I have a laptop HP preinstalled Windows 10. Everything was fine until tonight. System has proved to be valid until the 12.03.2016. Pressing on 'Activate' does not help. As you can see below... "Windows is activated" but expires on "so
-
Upgrading power supply and graphics card for HP-Pavilion VD012AA-ABU m9753uk
Hi guys I have a HP-Pavilion VD012AA-ABU m9753uk with OS windows 7 ulitmate and I want to upgrade my graphics card to a Nvidia GTX 560Ti and I was wondering if this card would hold on my motherboard. I know that the motherboard has a PCI Express x 16
-
When I try to install the update, my computer freezes and I have to do a system restore to remove update to make it work. If I go through the Device Manager and the attempt to update the driver, it makes my pc unusable. I can't find anything about
-
What are all the ways that we can open an application rather than clicking on the application icon
Hi all What are all the ways that we can open an application rather than clicking on the application icon. Is it possible to open an application with another application with a key word or something...