My dv7-1232nr using Windows 7 had an optional update from Windows for my driver Atheros AR5007.

Similar Questions

• I just bought a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  I JUST BOUGHT a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  Hello

  1. what exactly are you referring?
  2. Enter the code to upgrade the main code of the Office application or operating system?

  Follow the steps in this article.

  You receive an error message after you enter the product key when you try to install Windows XP
  http://support.Microsoft.com/kb/310637

• Anyone else had problems with updates from April 12, 2011 Windows?

  Last week (April 12, 2011) the automatic updates prevented me from using my PC.  The display is automatically set on 800 x 640 and it froze just trying to connect.   I did a system restore and everything were very good. BUT My Network Magic Software kept reminding me that there is an update of Windows for my PC, I went to Windows Update and installed updates.   Everything was fine.  So today, I restarted my PC (I usually leave it all the time).  The same problem as the last weeks took place so I restored the system to before April 12.  Everything is fine now but... I have automatic updates and I need to update Windows when even then, I need to know what to do.  Which of the 17 update could give me the problem and why?   I have Windows XP Pro SP3.  Please help me.  I don't know where else turns to help you.

  I'm so glad you are done with your updates in April.

  IRO your display problem, suggest you post your question in the 'Performance and Maintenance' or 'Desktop and personalization' forums and let the experts there trying to help you.

  BTW, your application Norton's new? Maybe a month or two? What was your previous antivirus and if it was 'properly' uninstalled before the installation of Norton. Please include this information in your new message/question.

  Concerning

• My Windows Vista laptop (dv9000 HP) is unable to update the drivers for the drive DVD-cannot use the device.

  The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  There are many causes of Code 39 errors in Device Manager:

  a. a required device driver is missing.

  b. a required binary file is corrupt.

  c. There is a problem with the file I/O process.

  (d) a pilot that refers to an entry point in another binary file cannot load.

  The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:

  Step 1:

  Try the fixit mentioned first and check if the dvd player works:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Step 3:

  Try the steps in the following link and check if the dvd player works:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you have any questions do not hesitate to answer, we would be happy to help.

• I have the same problem as the guy from the system restore, however, I received a notice that a prgram wrote a file in the box use windows for virtual memory

  one of such custom of norton of the tip allow the system restore work. tried to uninstall norton online and it locksup after, uninstall the type selection screen. neither work. also it locksup in normal mode, please wait screen after logo & carillon.

  Hi Terror64,

  1. what you trying to accomplish?

  2. Why do you want to do a system restore on the computer?

  3. What is the exact error that you receive when you perform the system restore?

  If you want to uninstall Norton from the computer then use the removal tool using the link below.

  Download and run the Norton removal tool to uninstall your Norton product

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• After using windows for some time Defender, I am now trying microsoft "security essentials". My question is what is the best? Security Essentials or Windows Defender.

  For all my other security I use norton 360 v 4.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  For all my other security I use norton 360 v 4.

  DO NOT RUN MSE AND NORTON AT THE SAME TIME!

  You will crash your PC often and it will become very slow.

• I don't have the language packs in my optional updates from the Windows Update - how to install a language pack?

  My hard drive crashed.  It was replaced and the outside company installed the OS for me.  However, I'm in a French country and they had no English operating system share so installed the french operating system without telling me.   I left it as it is that I had to install my other apps in a hurry.  Now, I want to change the language of the OS in English without having to reinstall the operating system.  The MS help Web site gives this page with instructions: http://windows.microsoft.com/en-US/windows/downloads/install-languages-with-windows-update, but I don't get the language packs when I click on "View available updates".  How can I install the English language pack if she does not?

  [1] relative to the first, third and fourth link: already done - the regional formats and input languages to the keyboard/are not the problem

  [2] re second link: that's where I started.  If you follow the links on this page, you get finally to the page I linked in my original post, above.  It says select a languge in the update of Windows

  If the language you want does NOT have a downloadlink on http://windows.microsoft.com/en-US/windows/downloads/languages, what you did (for example, adding input interface & English language keyboard) is ALL you can do with a Vista Home Premium French-language version.

  If you want any display in English, you need to install the English Language Pack , which, as you know, is only available for Vista Ultimate computers.

  Yes, it's unnecessarily confusing and convoluted but WYSIWYG, I'm afraid. You have that would be to buy an Anytime Upgrade from Vista Ultimate, (b) a Win7 Home Premium update (and then an Anytime Upgrade to Win7 Ultimate) or (c) a full-detail of a language version English version of any version of Win7... which will be probably much more expensive than buying a brand new computer with a version of English language of Win7 preinstalled (and good luck finding that in a French speaking country).

  Wish I had better news for you.

• I don't have language packs (LIP) in my optional updates from the Windows Update - how to install a language pack?

  I started a thread in another forum (http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/i-don), but was told to start a new thread in this forum if I still need help.  I still need some help, so I'm here.  My original post was as follows:

  My hard drive crashed. It was replaced and the outside company installed the OS for me. However, I'm in a French country and they had no English operating system share so installed the french operating system without telling me. I left it as it is that I had to install my other apps in a hurry. Now, I want to change the language of the OS in English without having to reinstall the operating system. The MS help Web site gives this page with instructions: http://windows.microsoft.com/en-US/windows/downloads/install-languages-with-windows-update, but I don't get the language packs when I click on "View available updates". How can I install the English language interface pack, if it is not displayed?

  Hello

  read this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  you who never read another answer you completely or correctly

  you have vista Home premium and the other answer correctly indicated that you can not change the display language of vista Home premium, which is what you're tryin gto

  you will need to either buy a ultimate upgrade, in french, then download the English language pack, as already stated

  or buy a full vista Home premium in English

• window for vista drive

  I want to know if I need a cd to the disc race hard because I don't have

  Read this info on reinstall Vista;

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot download updates from Microsoft for Windows 7.

  I made sure the firewall isn't interfering. neither my BitDefender antivirus software. any suggestions on where to find would be appreciated.

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  You can try and install the latest client update manually let your update settings to never check for updates until you install it.

  https://support.Microsoft.com/en-us/KB/3138612

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Can I use my steering wheel to Xbox 360 from Microsoft for an Xbox?

  Best regards

  Carsten

  Hi Carsten,

  I suggest you to contact Xbox support on your application.

  Xbox support

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  See also section below.

  How do I book an an Xbox

  http://support.Xbox.com/en-us/Xbox-one/reserve-FAQ

  For any query related to Windows, feel free to post. We will be happy to help you.

• 0x80072EFF when you perform the update from Microsoft for windows XP PRO. Microsoft Windows would load--not Internet (there!)

  I kept getting error 0X80072EFF whenever I run Microsoft Update for my Dell latitude XP pro. Windows Update would not, saying no connection, although it is. I tried some of the solutions proposed, including the installation and execution of Malwaebytes (836941), Trend Micro PRO sets a trojan virus. I also tried running ' services.msc in "-I did as suggested, but there is NO update of windows, or microsoft update services listed; the automatic update, the background intelligent transfer service and the support services are all enabled. I also download and run Microsoft FIX IT, running "DIFFICULTY IT for me. NOTHING WORKED! PLEASE HELP - I'M DESPERATE NOW. In ADDITION, whenever I search for "microsoft download" and click on it, Internet Explorer displays this web site AND other window on the home page! For Mozilla, it says. UNLISTED URL. WHAT NOW? PLS HELP!

  I finally solved the problem with the help of the people behind the software "ExterminateIt", suggested by one of the people in this forum. That software has not fixed the problem, but the engineer of the manufacturer told Envoy tool removing a software application TDSS rootkit (TDSS version 2.4.4.0) kaspersky Lab ZAO. The problem go away, and I was able to download the Microsoft Update. "Windows update also works now, and Mozilla Firefox does not display the"URL not FOUND"or: INVALID URL ', and he stopped this regular cliqueti sound from my laptop. Internet Explorer stopped showing double the home page windows, when the download window comes out. I was really impressed! Trend Micro Pro, malwarebytes and ExterminateIt, and others of CNET has failed!

  Thanks for all your suggestions!

• 64-bit Windows 7 driver for Atheros AR5007 in dv7-1468nr

  I have been in communication with Microsoft and HP technical support both on this issue.

  Can we please have a time frame on how long before that we will have a driver for the wireless card that is in this model the actual 64-bit?

  I don't want to sound rude here, but Acer has been much easier to get around the problem of driver for windows 7.

  Microsoft did confirm this evening that there is no 64-bit for this AR5007 driver and back to HP.

  Atheros seems to deal specifically with suppliers more with the support of its prodiucts, as it is my return to HP after six years of absence and the fact that my company is jumping through the hoops for the HP partnership, I would like an honest answer from an employee of HP.

  How long before that this driver is available in 64 bits?

  Until that time, all of the product is worthless for me as a professional and as a student for the simple reason that when you try to use a suppliant of security required for authentication, the network manager crash when using the measure of 802. 1 x. Microsoft has identified that specifically a driver related issue because there is no driver 64-bit available.

  Not to play against each other here, but in my profession and in my studies, I tend to promote these products that seem to work better and where assistance is available. The Acer also contained an Atheros card, but it was changed to use a broadcom driver in Windows 7. No idea why or how, I know that it works and it supports the Cisco PEAP supplicant, which is an important issue with the dv7-1468nr and Windows 7 with the Atheros AR5007 wireless device.

  Other related driver issues such as the multimedia remote that might be expected given that windows 7 has not officially released, but when I contacted support on the card reader does not not (another feature that works out of the box on an Acer hardware), I was told basically sorry charlie, good luck. Fortunately, I was able to locate an XP driver for the card reader works. The media remote is a trivial question, but the wireless is a serious problem. If it cannot be resolved within a reasonable time, I fear I will be boxing it up to return to where it was purchased, as defective. the deployment is in a few days...

  lets hope that we can really appropriate at this time that drivers.

  After three long sessions with Microsoft and a few sessions where I was not very tolerable with the "apology" given for drivers not made available via the website of HP, I was able to refine the exact question to something other than a real driver file.

  If the question was not in fact the driver file, it does not change the fact that HP should provide drivers on their website that they will BE supported for all operating systems promoted regardless of the version (Home Basic, premium, professional, ultimate, etc..). It became a problem in my final conversation of a HP technician before they gave me a link to a driver file real 64 bit, of course claim immunity from liability for any damage as a result of the application. The link of this driver is here.

  Now for the real root of the problem.

  On the new installation, there are several devices that have remained unknown in Device Manager.

  Day after day, a lesbianism HP drivers and applications to solve problems.

  What was actually the connection magaer crash on trying to manually create a connection by using the Cisco's PEAP Protocol was a corrupt application of Cisco installation. Through the process of trying to repair the installation and actually manually change the registry and remove all traces of the application with Microsoft in the remote session, it was determined that the system had become corrupt and need a fresh 'custom' install.

  After installation, using all the HP and Microsoft drivers only, (no application of third party still installed) I have successfully install the 64-bit application Cisco PEAP for 64-bit Vista and create the connection which is required.

  To date, there is only one problem with this laptop and I expect a fix from HP for it in the coming days.

  The HP MediaSmart application for this machine special 64-bit is always just a touch unstable running Windows 7 Professional.

  I hope that it can save someone else the days of frustration I endured everything in trying to solve this problem.

• Pavilion dv7-4180: upgrade Windows 7 to 8

  Hi all

  I have a HP Pavilion dv7-4180 using Windows 7.  I bought a Windows 8 of Microsoft and the Bill says:

  "Earn 8 32-bit/64-bit English VUP DVD."

  Online Microsoft provides this statement (quoted):

  «Download and install Windows 8.1 to Windows 7»
  1. sign in to your Microsoft account
  2. in the menu of left, click downloads, subscriptions and product key
  3. find your purchase Windows 8.1, and then click Download
  4. If a dialog box appears, click Run to start the installation
  5 follow the instructions in the installation wizard to complete the installation of Windows 8.1 "

  Before thiis upgrade, is there advice that I should follow to avoid an honest mistake?  For example, losing a feature because of the upgrade?

  Thanks for your comments.

  AtAF

  AtAF wrote:

  Peer

  Very practical advice.  Device Manager to see 'pilot' listed, or should I navigate on the control panel?

  Thank you.

  AtAF

  You can do this and see if there are drivers that manufacturing has to W8 for that specific material. But you should check the site driver from HP for your P/N and see whether they have or W8 drivers list. Don't forget the older laptop after 2012, the chances of HP with W8 drivers will be slim to none since they do not include support for older hardware.

• HP Pavilion DV7-1232nr XP Downgrade BSOD

  HP Pavilion DV7-1232nr

  During Downgrade XP, BSOD when it cannot load the RAID driver twice during install of FDD. He can run the F6 driver during the first part of the installation.

  I have of course there is this driver issue, but cannot get the unit up to install it. Even a Bart PE BSOD drive. Need to down grade to allow most of my business software to run. Custom in Vista.

  Thank you

  Have you tried my suggestion above for the ACPI\PNP0C32\1 of unknown devices?

  Try of BUS SM > South Bridge Driver, here