camera cinema 4 d animation problem

Similar Questions

• My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and you ask to consider this issue

  My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and you ask to consider this issue

  Apple ID: * *.com

  What is the error?

• My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and ask you to consider the problem of error code 1009

  My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and ask you to consider the problem of error code 1009

  Apple ID: *.

  Did you check out this article? Seems to be linked to the AppStore and the country where you're:

  Why my iphon give me error code 1009?

• Do I need a camera to use the Animation of characters?

  Do I need a camera to use the Animation of characters?

  You need not use a camera. If you want to use triggers on keyboard to move the puppet and a WAV for speech, it can bring very good results.

• Black Magic pocket camera / cinema DNG (compressed)

  Is there a method to get the pocket camera CinemaDNG files to work first? (or Speedgrade?) They function as individual images in Photoshop.

  Apparently, they are "compressed" CinemaDNG.

  To answer this thread to loop the loop.

  Only the Blackmagic film camera cinema DNG files are currently supported in first Pro CC and CC SpeedGrade.

  AfterEffects and PhotoShop use one other importer that Premiere Pro and SpeedGrade. So if you make a request for a (Premiere Pro), by default it will count for SpeedGrade as well.

  Thank you

  Peter Garaway

  Adobe

  Premiere Pro

• camera update of iOS 10 problem

  Hi all!

  Did an upgrade on iPhone 6 to iOS10. Discovered that the camera works very badly. When you access the camera on the lockscreen, he hangs up. After the launch, the camera shows black screen or static blurred image on the picture frame. Change for recording, the camera begins sometimes to work. Then switching to the definition, work badly the recording settings are working a little bit better but still frequently hang up pictures. It is the same for access to the phone after having unlocked the phone. Hasn't done anything on the material and everything worked fine before the upgrade. What can we do about it? Think without decommissioning once again, so that the camera works normally again. Need to use it a lot.

  See you soon!

  Hey snail_mail,

  Thank you for using communities Support from Apple. I can see from your post that you are having problems with your camera since the upgrade to iOS 10. Having a camera work is part of a great smartphone experience so we would like to help with this. I have included a link below which has some troubleshooting tips to help make it work normally again.

  Get help with the camera on your iPhone, iPad or iPod touch

  ​

  Let us know if this helps

  See you soon.

  ​

• Action Cam Movie Creator, GPS overlay problems (solved)

  Hello community,

  I am Stefan of Germany.

  I am owner of a HDR - AZ1 with remote control. When I overlay the GPS data I get the white areas in my video.

  That seems independent of importation through the CCMA or PMH.

  Firmware and software of cam, remote and program is the latest version.

  I reinstalled PMH and ACMC and tried both Win7 compatibility modes.

  My OS is win10/32.

  Anyone have an idea how to fix?

  Thanks and regards,

  Stefan

  screenshot of the problem

  
  

• Cam on Satellite L305D-S5893 problem

  My friend has a portable Satellite L305D-S5893 that he had bought Friday.

  The camera in his laptop computer is called a webcam Chicony USB 2.0. It is built directly into it and the food it receives and it is horrible. We have tried everything we can think of to fix it. We have even looked at some forums and there the latest updates of SP for Vista. We turned on the night mode which helps but makes kind of lag for him.

  If any of you have ANY idea on how to solve this problem, we would really appreciate.

  After reading your ad, I can't recognize any problem there. I have Satellite P200 and Satellite A300, both with the webcam and the image quality is the same. Integrated cam's and I believe that she can never offer so many good quality as external webcams.

  You have to compare with the quality of the image of the other models of Toshiba?
  You see no difference?

  When I use the webcam for Skype I use it with a lot of light in the room and then is OK quality.

• Camera front 6 s iPhone problem more

  I noticed that if the front of the 6s more is exposed

  to strong light - when I take a selfie - there is a flash of white light on the screen

  Although the picture comes out ok.

  someone at - it had the same problem?

  Thank you

  Haon

  It's embarrassing! I didn't know all I had to do is pulled off before flash cam...

• Camera USB LabVIEW 8.6 problem

  I'm new kind of LabView.  I'm working on a project of image editing, but I have problems with a camera USB and LV.

  I installed the NI_IMAQ file USB, I the NI Vision module.  I read the "NOR-IMAQ_for_USB_Camera_User_Guide", but I can't find that they use the numbers (fig. 6).  I imagine that the writer may have used a slightly different version of the LV, but I can't find anything in my icon palette that has a "USB Grab of acquisition".

  When work to aid the Vision Assistant, I am able to capture images of my USB camera so I know it works, I can not set up as a VI.

  Y at - he one day User Guide or matter who has a direction?

  Thank you for your time,

  -Rocky

  Hey, Rocky,

  Attached the files you're looking for...

  Andrey.

• Camera on kitkat A1-810 problem

  Hello

  My camera stopped working for some reason any. I did a factory reset and tried other apps camarea but it didn't work.

  I thought the flashing of image of the acer page, but since my Tablet its kitkat on it is the only image (kitkat) to download, but it is not not my area (WWW_GEN1) or can use a jellybean? I don't really know

  any help please? Thank you

  Re-Flash new rom update. I think that he just had some problem on camera.apk.

• HP Envy x 2 - my camera said "There was a problem take this photograph.

  Hi guys, I have the new HP Envy x 2 and I appreciate it. There is just this slight little problem. Whenever I open the application "Camera" or "Youcam", I get a message that says that there is a problem taking this photograph. This happens when I try to take a photo or video. What this means, is that I can't take pictures or videos on my desire, that sucks

  Any suggestion would be appreciated

  Thank you, Jonathan

  Sorry for the double post... but I was able to recreate the error by changing the permissions on the folder "film".
  Log on to an account with administrator privileges, open the images folder, right-click on the folder properties and film. On the Security tab, make sure that Deny is not defined for groups or users in the list. Click on change for change (remove the check marks if they exist) and click OK to set thte changes.

• Rate timeline animation problem frame

  Hello world

  I'm working on some GIF animations simple and had no problem doing in the past. Since this morning I have problems with the cadence when I try to save for web and devices. Any rate I put in the timeline panel, save the animation for the web and devices drastically reduced the animation up to a point where the animation is not yet supposed more. For example, I have an Animation that fades through some pictures and texts, and has about 200 frames with the FPS to 15 within the PS:

  

  Once I save it for the web and devices that the animation gets reduced to 9 views in total:

  

  The compression settings are intact:

  

  There seems to be no way to reduce managers by force within "save for web and devices", except using static images and no animations/transitions. In my case, I have 7 "slides" in my GIF who are gathered by transitions fade to white, so PS should have at least one picture for each state transitions.

  I spent most of the day looking on Google and try around me, without success.

  
  Here are some technical details about my setup:

  

  Betriebssystemname	Microsoft Windows 7 Professional
  Version	6.1.7601 SP1 Build 7601
  Additional Betriebssystembeschreibung	Non available
  Betriebssystemhersteller	Microsoft Corporation
  SystemName	3770-A
  Systemhersteller	Dell Inc.
  Systemmodell	Precision T1700
  Systemtyp	x 64-based PC
  Prozessor	Intel Xeon CPU E3-1271 v3 to 3.60 GHz, 3601 MHz, 4 Kern (e), 8 logische (r) processor (en)
  BIOS version /-Datum	A15 Dell Inc., 02.02.2015
  SMBIOS version	2.7
  Windows-Verzeichnis	C:\WINDOWS
  Systemverzeichnis	C:\Windows\System32
  Startgerat	\Device\HarddiskVolume2
  Gebietsschema	Deutschland
  Hardwareabstraktionsebene	Version = "6.1.7601.17514".
  Benutzername	BUFFALO\nd
  Zeitzone	Mitteleuropaische summer time
  Installierter physikalischer Speicher (RAM)	16.0 GB
  Model realer Speicher	15.9 GB
  Rechtssicherheit realer Speicher	9.55 GB
  Virtueller model Speicher	31.9 GB
  Virtueller Rechtssicherheit Speicher	23.7 GB
  Big der Auslagerungsdatei	15.9 GB
  Auslagerungsdatei	C:\pagefile.sys

  Name	NVIDIA Quadro K4200
  PNP-Geratekennung	PCI\VEN_10DE & DEV_11B4 & SUBSYS_109610DE & REV_A1\4 & 2412C6A & 0 & 0008
  Adaptertyp	Quadro K4200, NVIDIA-compatible
  Adapterbeschreibung	NVIDIA Quadro K4200
  Adapter RAM	(1,048,576) bytes
  Installierte Treiber	nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
  Treiberversion	9.18.13.4788
  INF-Datei	oem94.inf (section Section063)
  Farbebenen	Non available
  Farbtabelleneintrage	4294967296
  Auflösung	1920 x 1200 x 59 Hz
  Bits/Pixel	32
  Speicheradresse	0xF6000000-0xF6FFFFFF
  Speicheradresse	0xE0000000-0xFEAFFFFF
  Speicheradresse	0xF0000000-0xF1FFFFFF
  Port/A-E	0x0000E000-0x0000E07F
  IRQ channel	IRQ 4294967292
  Port/A-E	0x000003B0-0x000003BB
  Port/A-E	0x000003C0-0x000003DF
  Speicheradresse	0xA0000-0xBFFFF
  Treiber	c:\windows\system32\drivers\nvlddmkm.sys (9.18.13.4788, 9.79 MB (10.262.160 bytes), 01.04.2015 15:23)

  
  

  
  

  If more details are needed let me know.

  
  

  Any help is welcome, thanks in advance!
  

  Hi Benjamin,

  Thanks for your reply. Unfortunately the resetting has not helped but...

  But I managed to find the solution. This problem only occurs if you use PS transitions exclusively (without keyframes at all). I deleted all the transitions of PS and replaced by manual key image transitions and the result and the framerate is as expected today. This seems to be a bug in Photoshop.

  Kind regards!

• scale, source video position, then sequence multiple camera for picture-in-picture problem

  I have 7 source for several cameras cameras and everything works very well in multiple camera monitor.

  Now I want to Picture in Picture (video in video) and take the same video tracks 7, apply motion effect, scale, opacity of mask and place overtop of the multiple cameras and reach the image in the image.

  My picture in the video tracks 7 photo overtop of the multi-cam edit turn into 12 tracks video - cameras of 7 source, any other scale, different motion effect, different opacity mask. Things get confusing with the number of video tracks that I turn on and off to what image in the image that I want displayed.

  I decide to multi-camera video track 12 "picture in picture" by creating its own sequence and nesting in multicamera edit.

  First problem is that my multiple camera monitor gives me tiny thumbnails, because that's what I created, he is picture in picture - and I'm looking for a way to create larger thumbnails - so I nest the 1920 x 1080 in a sequence of 460 x 370 and gives me the biggest thumnails in the monitor of multiple camera which I'm looking for.

  This leads to the second problem is that now my thumb nails have the false image - the motion effect is not perfect in the thumbnail, but if selected for the source of the multi-cam edit sequence, the motion effect is correct.

  Question is - how to get the size of the image in picture multiple camera monitor to display correctly in the program monitor multicamera thumnails?

  I tried to go back to the image in the source photo sequence and nesting video track - but it gives me even worse representation of the image in the thumbnail of the image in sequence edit multi-camera monitor.

  As I understand it, here's what I would say.

  Create a multicam for the enlarged image sequence and which cuts.

  Create a separate for the projected PiP multicam image and who cut as full screen also.

  For the shots in the multicam main sequence that can be seen on the screen, add the second multicam on V2 and scale/position properly.

• Change the camera preset in the animation...

  ... I am new to AE CC and recently created a 3d cube by following this tutorial Cube 3D in After Effects - YouTube.

  All 6 sites have now different running animation. I want to make is that the camera should move inside the cube

  but in order to watch the animations of sites that the screening must be changed to 15 mm from the middle of the cube is reached.

  The standard 50 mm camera is not editable in the time line, starting from 15 mm camera from the beginning leaves the cube

  look weird... suggestions?

  Thank you.

  Select your camera layer and press the a button twice. Now click on the stopwatch on the properties you see, including the zoom level. A standard 50mm lens has a zoom of 2666,6667 pixels value. Once you have activated the animation of the zoom value, you can either do drag the value around the scenario or you can double click on the camera and the lens settings there. Your project should look like this:

  By the way, changing the value of zoom or more exactly, the focal length of a lens does not change the perspective. Point of view is controlled by the position of the camera. If you want to change your point of view, change the position of the camera, if you want to change the framing then change the focal length. The AE camera is optically perfect 100%, so you will not get the barrel with a lens distortion wide angle as you would with a real camera so if you want to simulate or correspond to the perspective of something like a GoPro with its almost fisheye lens you add effects > distort > optics Compensation and set a value for the field of vision.

  

  Here is a project for you to watch CS6. Note that the prospect does not change until I have move the camera. When you download the file to your browser may add a .txt extension after extension .aep. Just delete the .txt and AE will open the file.