Campaign code
What is the campaign code in the application of care Xperia?
@TINA66 I believe that such a code to unlock for free movies, or other gifts
Tags: Sony Software
Similar Questions
-
Hi How can I know if I'm on gold Xperia Lounge (Z3 +) also the campaign code how do one and that's a big thank you
If you have a flagship Xperia your account will be gold
-
Anyone used Eloqua to track incoming automated sales calls?
We tried the sfdc campaigns, but our sales behavior is not 'clean' so I hope that there is a way to do this way automated with eloqua. someone had this problem and a bit of luck solve? Thank you!
Jascha - I thought about this a bit more. Select a Source of lead in the "incoming call" by chance in the SFDC sales contact or lead to registration? One idea is to feed all the contacts in a program in eloqua with this source of lead and assign to this contact a SFDC campaign code and then send the contact through CRM Eloqua/SFDC integration program.
-
Sum of columns together in the responses, and then calculated off summary columns
I have three questions answers (with 4 columns) that I have gathered the results for:
Four columns are: campaign # promoted # Respones, # Respones promoted
Query 1:
Campaign, # promoted, 0, 0
Query 2:
Campaign responses #, 0, 0,.
Query 3:
Campaign, 0, 0, # promoted Respones
My query returns the following (assuming that the campaign code is ABC) 3 rows:
Campaign of # Promoted # Responses # Promoted answers ABC 100 0 0 ABC 0 12 0 ABC 0 0 9 I want to put in place so that it adds campaign to get a row of results as follows:
Campaign of # Promoted # Responses # Promoted answers ABC 100 12 9 I can get this result using the conversion to a PivotTable (won't go thought road if possible because I have other calculations that I need to add). Once I get this summary to a single row result I then do a few such analyses that create:
- Response % (Respones # / # promoted)
- Promoted to the rank of % (# promoted answers / # promoted)
When I add the calculatinos to the percentages to the United query I get null or zero for my results. I used the Add button to insert a calcuation and then I used the following formula: saw_2 / saw_3
Here's what I would preferably:
- Sum of answers (not a pivot table) Table columns.
- Add columns calculated at United query that will produce results based on the combined pivot columns
- If I use the PivotTable, and then how to get the values calculated for work
Thank you...
Ben,
Try to use the rule of aggregation on the columns in the Table view and see if that makes a difference.
I just tried this and the SUM of each of the criteria provided the results I wanted, which in turn you are looking for.
If nothing works for you send me the screenshot of what you are trying to do at vijaybez at gmail and I can understand what is happening properly...
-
extract xml data in the collection
Hello
I want to extract xml data in a collection of collection
could any body you tell me if we succeed in sql
ex:
declare
type t_code is table of number;
type r_rec is record (c_name varchar2 (100),)
c_code vrachar2 (100),
c_code_number t_code);
type t_rec is the table of the r_rec;
l_xml xmltype: = xmltype (')
< body >
<>campaign
< code > < code > CAMP_1
< description > Campaign_1 < / description >
< rateplans >
< rateplanCode > 1 < / rateplanCode >
< rateplanCode > 2 < / rateplanCode >
< rateplanCode > 3 < / rateplanCode >
< / rateplans >
< / campaign >
<>campaign
< code > < code > CAMP_2
< description > Campaign_2 < / description >
< rateplans >
< > 11 rateplanCode < / rateplanCode >
< > 22 rateplanCode < / rateplanCode >
< rateplanCode > 33 < / rateplanCode >
< / rateplans >
< / campaign >
<>campaign
< code > < code > CAMP_3
< description > Campaign_3 < / description >
< rateplans >
< > 111 rateplanCode < / rateplanCode >
< > 222 rateplanCode < / rateplanCode >
< > 333 rateplanCode < / rateplanCode >
< / rateplans >
< / campaign >
< result >
< > 00 resultCode < / resultCode >
< resultText > success < / resultText >
< / result >
(< / body > ');
Start
Select / * logic exrat value of xml in the final collection * /.
Double;
end;
I want data in the model in my final collection t_rec
CAMP_1, Campaign_1, nested_table (1,2,3)
CAMP_2, Campaign_2, nested_table (11,22,33)
CAMP_3, Campaign_3, nested_table (111,222,333)
Published by: 948596 on May 17, 2013 05:17Like this
SQL> declare 2 type t_code is table of number ; 3 type r_rec is record 4 ( 5 c_name varchar2(100), 6 c_code varchar2(100), 7 c_code_number t_code 8 ); 9 type t_rec is table of r_rec ; 10 l_rec t_rec := t_rec(); 11 l_xml xmltype := xmltype 12 (' 13 14
15 23CAMP_1
16Campaign_1 1718 221 192 203 2124 32CAMP_2
25Campaign_2 2627 3111 2822 2933 3033 41CAMP_3
34Campaign_3 3536 40111 37222 38333 3942 45 ' 46 ) ; 47 begin 48 for i in ( 49 select rownum id 50 , t1.code 51 , t1.description 52 , t2.rate_plan_code 53 , row_number() over(partition by t1.code order by t2.rate_plan_code) rno 54 from xmltable 55 ( 56 '/body/campaign' passing l_xml 57 columns 58 code varchar2(100) path 'code', 59 description varchar2(100) path 'description', 60 rate_plans xmltype path 'rateplans' 61 ) t1 62 , xmltable 63 ( 64 '/rateplans/rateplanCode' passing t1.rate_plans 65 columns 66 rate_plan_code varchar2(100) path '.' 67 ) t2 68 ) 69 loop 70 if i.rno = 1 then 71 l_rec.extend; 72 l_rec(l_rec.count).c_name := i.description; 73 l_rec(l_rec.count).c_code := i.code; 74 l_rec(l_rec.count).c_code_number := t_code(); 75 end if; 76 l_rec(l_rec.count).c_code_number.extend; 77 l_rec(l_rec.count).c_code_number(i.rno) := i.rate_plan_code; 78 end loop; 79 for i in 1..l_rec.count 80 loop 81 dbms_output.put_line(l_rec(i).c_code || ' ' || l_rec(i).c_name); 82 for j in 1..l_rec(i).c_code_number.count 83 loop 84 dbms_output.put_line(l_rec(i).c_code_number(j)); 85 end loop; 86 end loop; 87 end; 88 / CAMP_1 Campaign_1 1 2 3 CAMP_2 Campaign_2 11 22 33 CAMP_3 Campaign_3 111 222 333 PL/SQL procedure successfully completed. SQL>00 43Success 44 -
PL/SQL simple report - using break on and calculation amount - not so Simple
Hello, all:
I have a simple pl/sql report which is not so simple. Based on the code below, would like to add a blank line after the line "sum" resulting to make it easier to read. Any help would be appreciated.
Thank you.
Preston@large
Code:
=======================
BREAK ON ALM_OG_CAMPAIGN_CODE
CALCULATE SUM OF THE ALM_OG_AMOUNT ON ALM_OG_CAMPAIGN_CODE
set linesize 1024
set pagesize 60
NewPage 0 value
Set serveroutput on
COIL & so_outfile;
TTITLE Center "Wayne State University" jump jump "WSU online giving Essentials Report" left 1 2
Select TO_CHAR (sysdate, ' dd/mm/yyyy hh: mm AM') 'Date of Report' of the double;
CLEAR COLUMN
ALM_OG_ACCI_CODE column header "ACCI | CODE' format a10
the title of ALM_OG_AMOUNT column ' AMOUNT '. GIFT"format $999,999,999.99
ALM_OG_CAMPAIGN_CODE column header "CAMPAIGN | CODE' format a14
Select
ALM_OG_CAMPAIGN_CODE,
ALM_OG_ACCI_CODE,
ALM_OG_AMOUNT
Of WSUALUMNI. WSU_ONLINE_GIVING_TABLE
ORDER BY ALM_OG_CAMPAIGN_CODE;
CLEAR COLUMN
/
spool off
Output:
Report on the essential online giving WSU
Date of report
======================
05/06/2009 10:06
1 selected line.
Wayne State University
Report on the essential online giving WSU
AMOUNT OF CAMPAIGN ACCI
A GIVEN CODE CODE FACT
====== ======== ==========
$ 560.00
NUR $444814 10.00
***** =======
$ 10.00
PHS $445216 10.00
***** =======
$ 10.00
ABOUT $445211 450.00
$445211 60.00
$445211 250.00
***** =======
$ 760.00
SBA $444216 10.00
***** =======
$ 10.00
SSW $444469 10.00
***** =======
$ 10.00Prestone,
Welcome to the Forum!
I have used skip 2 lines you can use 1 SQL> break on job report skip 2 SQL> compute sum of sal on job report SQL> select job , sal from emp order by job ; JOB SAL --------- ---------- ANALYST 3000 3000 ********* ---------- sum 6000 CLERK 1300 950 800 1100 ********* ---------- sum 4150 MANAGER 2850 2975 2450 ********* ---------- sum 8275 PRESIDENT 5000 ********* ---------- sum 5000 SALESMAN 1500 1250 1250 1600 ********* ---------- sum 5600 14 rows selected.
READ
Quick SQL * Plus Guide
http://download.Oracle.com/docs/CD/B14117_01/server.101/b12171/TOC.htm
SQL * more reference
http://download.Oracle.com/docs/CD/B14117_01/server.101/b12170/TOC.htmSS
-
Members of campaign item: status: excluded Email - reason codes
I activated a campaign recently and some members have been left in a stage of e-mail. Click the number opens a window called campaign element members. There is a column on the far right called State and the State is set to excluded e-mail with values = M, u and B. I can't find any documentation on her mean these reason codes. Someone know where I can find it?
Thank you
If you export the list of contacts into Excel, you see a more explicit description of patterns, such as:
Excluded from E-mail: Bounceback.
Excluded from the email: unsubscribe.
Excluded from the E-mail: master Exclude.
From there, I would say: M ist Master Exclude, U is to unsubscribe and B is Bounceback.
-
I STOPPED RECENTLY A CAMERA, AND DOWNLOADED A PROMO CODE CAMPAIGN PRODUCED WHAT IS ALL ABOUT
Something to do with the products of the campaign. Help
What kind of camera order you? Can provide you any other details?
-
Switch the SFDC ID campaign to dynamically query string?
Hello
I have a few campaigns created and I want to spend the SFDC ID campaign in a landing page query string URL in an attached email.
I want to pass campaign SFDC ID dynamically, as if I chose send email step and added an email campaign. I sfdc campaign id and for each campaign, I don't want to hard-code the value. Just like field merges I want to fill the value in the URL.
Is it possible anyway.
Thank you
Dardare
Dardare, try adding this string as a query string parameter in your emails.
This box works if the Eloqua campaign has the ID of CRM campaign settled in campaign settings. See also: complete list of Default merge fields?
Kind regards
James
-
Closed loop Reporting and several campaigns using the same form
I hope that I am able to explain it properly.
We have a webinar and a campaign of follow-up of living room. In the living room campaign, it is a simple 'personal' email to thank those who came to our booth and to invite them to the Web conference or contact us for further examination. So both the webinar and the campaign of trade show, I've added the landing page and the form for the webinar, however, when people register for the webinar, they appear in the living room campaign in Salesforce and campaign Webinar is empty.
So based on this it seems I can only get the landing page and shape in 1 campaign so that the Common Language Runtime function properly. Can someone confirm this for me? Or should I be doing things differently?
Thank you!
Hey Rochelle, Yep you've stumbled upon a serious limitation by using closed loop reporting. This is what is happening. Since you sent your email show campaign, Eloqua adds dynamically the elqCampaignID of the campaign to show links in the email. So when someone clicks on the link, they are inherited from the elqCampaignId related to the trade fair. For example, this is an example of the link that is generated dynamically:
http://
/LP = 312? elqCampaignId = 467 In this case, the fair campaign is associated with 467 but your Webinar campaign can be linked to 468.
The way around this problem to take the ELQ ID associated with the campaign webinar and hard-code it in the email you send. If you take
http://
/lp = 312? elqCampaignID = 468 and hard code in your email that you send. What happens is that eloqua then dynamically add the other elqID on the tip of the tail so you get this: http://
/lp = 312? elqCampaignID = 468 &? elqCampaignID = 467. Fortunately, for the purposes of the CLR, it will take the first elqCampaignID he meets. Allowing you to have all of these authors attached to the correct campaign in SFDC. -
Integration of campaign - ELQ vs SFDC
I'm on the E10, faced with the integration of the campaign...
Here's the process I plan:
1 / campaign is created in Eloqua
2 / campaign is pushed to SFDC with the "internal campaign ID".
3 / the campaign updated in SFDC get pulled back in Eloqua, update the existing with the "internal campaign ID".
Point 1 / and 2 / work perfectly.
Point 3 / seems very delicate...
Look at the answers on Topliners and support portal, I found this:
the last comment by
contains this process:You will need to do a manual one-time update of the SFDC campaign ID in the field «External campaign ID» Eloqua
So my question is:
Is it necessary to do a manual update of the 'external campaign ID? I could use the "internal campaign ID? And how?
Thank you
This step is necessary. If the campaigns have already been created in Eloqua and SFDC, then there is no inherent link between them and without codes or system will know who advocates for update. However, you just do it once, following the other steps in the linked post go to that each time that you create a campaign in Eloqua, a campaign will be automatically created in SFDC and the generated ID synchronized to the rear. It is important to note that you should never work with Eloqua campaign until the ID returned from the integration, as the ID will not update in your browsing session if you have open countryside and you could end up saving your campaign and crush the returned ID (break integration until you go and enter manually).
The internal campaign ID Eloqua is not relevant to the integration of the CRM. It does nothing outside of the Eloqua application and cannot be used as one of the sync fields.
-
How to insert my answering machine 'HTML code' in the custom form that I have create Muse?
Hey,.
I can design very elegant adobe muse subscription forms still don't know how to link my 'answering machine HTML code. As we know, muse of adobe has a sample form in contact widget library... When I try to customize it to my goal, I will finish by adding co-opted in my autoresponder MANUELLEMENT campaign e-mail addresses and is not useful to me at all.
Any ideas will be appreciated.
Kind regards
This can be changed in end accommodation, other use third party form service where you can design the email autoresponder list.
Thank you
Sanjit
-
Why does my code HTML seem different when I add in Muse?
I'm working on creating a popup of the mailing list and it looks like this, when I test in a HTML Tester:
However, when I add it in Muse (object-> insert HTML code), it comes out that looks like this:
Just for reference, I put it in an album of pop up when a user accesses the home page. Here is the HTML code I use:
<! doctype html >
< html >
< style type = "text/css" >
form {}
border: 5px #01a0ac solid;
border-radius: 25px;
Padding: 15px;
Width: 600px;
height: 425px;
do-family: 'Myriad Pro', 'Myriad', without serif.
}
. Border {}
black border: 1px solid;
Width: 500
pxdisplay: inline-block;
float: right;
Clear: left;
Width: 450px;
text-align: right;
padding-left: 20px;
}
. Input {}
background-color: #01a0ac;
do-size: 16px;
color: white;
border: black 1px solid;
border-radius: 25px;
Width: 150px;
height: 30px;
}
< / style >
" < form action =" https://bodyfitmd.perfectmind.com/22395/contacts/signup "autocomplete ="on"method ="post"onsubmit =" return formCheck (this); setCookie()">
<!-- ****************************** ADDING IN LOGO ****************************** -->
" < Center > < img src = ' http://www.bodyfitmd.com/images/bfmd%20logo%20png.PNG "width = height 150px = 150px > < / img > < / center > < br / > "
Sign up for the new < br > BFMD
And be the first to know about our special promotions and well-being tips, delivered directly to your Inbox!
<!-* Registration AND CAMPAIGN ID *->
< input name = "signupId" type = "hidden" value = "#" > < input id = "ReferralCode" name = "ReferralCode" type = "hidden" >
"< input name ="CampaignActivity.Campaign"type ="hidden"name =" # "value =" #">
< to input id = "stepToGo" name = "stepToGo" type = "hidden" value = "CheckoutComplete" >
< input id = "goBackUrl" name = "goBackUrl" type = "hidden" value = "/" >
<!-- ****************************** FORM INPUT ****************************** -->
< br > < br > * first name < input class = "border" id = "First name" name = "FirstName" type = "text" > < br >
* Family name < input class = "border" id = "LastName" name = "LastName" type = "text" > < br >
* E-mail address < input class = "border" id = "Email" name = "Email" type = "text" > < br > < br >
< Center > < input class = "input" type = "submit" value = yes, "sign me up!" > < / center > < br / >
By registering for our Newsletter, you consent to BodyFitMD sending of our newsletter, occasional additional communications and invitations to our events. < / make >
< / make >
< / html >
I have the values entered where # is showing above. The site currently lies at bfmdtest.businesscatalyst.com. Please help me understand what Miss me here! Thank you!
To get a good start with CSS, several software web design (like Muse) use a 'standard' to assign several HTML tags of more practical, before CSS values even to create specific CSS rules. Probably the HTML that you use, does not provide such a standard or modified values settings. If the code that you insert can carry a tag HTML, ID or class, which was already a style Muse. So he can behave properly, requires some curious and tinkering with the HTML and the CSS...
-
Updates will not download and install - NO ERROR CODE - updates remain at 0%
For Adobe Support.
I get the popup "update" whenever I connect to my computer and it gives me an error message but no code error. The update starts at 0% and stays there indefinitely.
It's VERY frustrating because on top of working 10 hours today, I have now lost another hour, trying in vain to find a solution.
By quitting their stand alone suite (CS5, 6 etc) and later support for it, Adobe has FORCED me to use their Cloud Creative suite subscription. While I HATE not being able to buy a standalone program, I like the CC Suite and I'm PAYING for this subscription that provides the latest updates. Now, all of a sudden the updates will not download and install and Adobe wants me to follow a set RIDICULOUSLY long and complicated steps to solve the problem? It's a complete and absolute nonsense!
I am a self-controlled, respectable and intelligent individual, but it makes me want to use profanity! I HAVE NO TIME FOR THIS NONSENSE.
According to the latest information (see: Adobe : Cloud accelerates since 3.4 million paid creative members |) ProDesignTools) there is over 3.4 million people like me PAY for reliable use!
Frankly, I'm so frustrated that I am very close to spearhead a national campaign to educate these users 3.4 million on the negligence of Adobe supported because it's visitors!
WE SHOULD NOT HAVE TO SOLVE THE PROBLEM! ADOBE NEEDS TO SOLVE THE PROBLEM! When you get this figured out, I'll certainly appreciate an e-mail from your. In the meantime. Be aware that each passing day, and whenever I see this pop up, it serves as a reminder that Adobe does not respect what they promised!
Kind regards
Brian Heckman
EMAIL: [email protected]
Hello
If it you please restart your computer and then try to install updates again.
If this does not work, follow the steps mentioned in this doc. KB troubleshoot Adobe Creative Cloud download and installation of the questions for help.
Kind regards
Nicos
-
Something like a universal clickTAG code to AS3?
Hello! I got this code from my client to use for a campaign in a set of banners:
(release) / / universal "clickTAG"
{
If ("clickTAG"! = null) {getURL (ClickTag, "_blank") ;}}
ElseIf ("clickTAG"! = null) {getURL (clickTAG, "_blank") ;}}
ElseIf ("clickTAG"! = null) {getURL (clicktag, "_blank") ;}}
ElseIf (_root.link1! = null) {getURL (_root.link1, "_blank") ;}}
ElseIf (_root.clickTAG! = null) {getURL (_root.clickTAG, "_blank") ;}}
}
It is AS2, and I don't know if it works, but as they gave it to me, should be. Question - is there a similar AS3 version out there? Since I'm on Flash Professional CC.
I tried something like this:
() Link.addEventListener
MouseEvent.CLICK,
function (): void {}
If (root.loaderInfo.parameters.clickTAG.substr (0,5) == "http:") {}
navigateToURL)
URLRequest (root.loaderInfo.parameters.clickTAG) news, "_blank".
);
}
ElseIf (root.loaderInfo.parameters.clickTag.substr (0,5) == "http:") {}
navigateToURL)
URLRequest (root.loaderInfo.parameters.clickTag) news, "_blank".
);
}
ElseIf (root.loaderInfo.parameters.clicktag.substr (0,5) == "http:") {}
navigateToURL)
URLRequest (root.loaderInfo.parameters.clicktag) news, "_blank".
);
}
ElseIf (root.loaderInfo.parameters._root.link1.substr (0,5) == "http:") {}
navigateToURL)
URLRequest (root.loaderInfo.parameters._root.link1) news, "_blank".
);
}
ElseIf (root.loaderInfo.parameters.ClickTag.substr (0,5) == "http:") {}
navigateToURL)
URLRequest (root.loaderInfo.parameters.ClickTag) news, "_blank".
);
}
ElseIf (root.loaderInfo.parameters._root.clickTAG.substr (0,5) == "http:") {}
navigateToURL)
URLRequest (root.loaderInfo.parameters._root.clickTAG) news, "_blank".
);
}
}
);
But no luck, it was running only the first version of "clickTAG". Any help is appreciated.
You get a substring of an object that doesn't exist may not. Try to take the substr pieces.
Maybe you are looking for
-
EliteBook 8440p: Recover my windows series
Hello I bought a 8440p with a friend here last week, I tried to restore the system from the F11 key at startup, but it seems that this key don't have any function, I googled and I found that I have to download HP protect tools and HDD decryp but with
-
Satellite A300D and ExpressCard Remote control
Hello guys,. I own a Satellite A300D-135, y at - it an available for this model remote control? I'm looking for a remote control that fits in ExpressCard location as some HP models have.I looked at several Dutch hardware well known, but I can't find
-
Hello First of all, thanks to all to contribute to this community, I found so much great information here. It seems that my HD on my old Macbook Pro 5.2 (2009) has reached its end of life. I'm not able to boot, it stops just below and when you try to
-
Satellite A60: Question on calibration of the battery
Hey all,. I was wondering if there was anyway I could recalibrate my battery for my laptop and if so... How? I have a Satellite A60-772.
-
I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn. The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button