PL/SQL simple report - using break on and calculation amount - not so Simple

Similar Questions

• I use microsoft vista and I can not find my webcam to any help

  I use Microsoft vista and I can not find my webcam to any help

  I use Microsoft vista and I can not find my webcam to any help

  Huh?

  Related topics

  Webcam with operating system compatibility
  My computer does not know that it has built in webcam.
  I have a toshiba laptop and I can't get the webcam to work it says its disabled
  Vista cannot locate drivers for my new LifeCam

• I use Windows 7 and I am not able to print several different images on a single page.

  When I try to print photos from the 'My pictures' library, I use the following steps:

  1. turn the photo highlight

  2. click on 'print '.

  3. in the window that says: "How do you want to print your photos? I choose the number of photos I want per page, for example 3 x 5.

  4. when I try to add a picture DIFFERENT from my library so that I can print several different photos on this page of photos of 3 x 5, it simply replaces the previous photo. How can I get there?

  Thank you.

  Original title: I use Windows 7 and I am not able to print several different images on a single page. The answer posted here from 8/11 includes a link that does not work.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  What program you want to use?

  We will try to print in a different way and check.
   
  Open Paint and then do a collage of different photos then save it then open it in their program and print.
   

  To print the image in Microsoft Paint, steps to follow:

  a. Click Start, in the search box, type in the paint.

  b. open the document you want to print.

  c. select print and check.

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

   
  Hope this information helps. Please reply back with the

• I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  Hello

  Can you please follow the instructions below.

  1. Click on the link below and open Photoshop Elements download link.

  Note: We are not anything downloaded from the page of Photoshop Elements.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  2. then click on the link below and download the installer directly mentioned in step 2.

  • for windows

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/Win64/Lightroom_6_LS11.exe

  • for mac

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/OSX10/Lightroom_6_LS11.dmg

  
  

  
  You can run the installation file once the download is complete.

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Error 16? I use windows 8 and I do not know how to solve.

  error 16? I use windows 8 and I do not know how to solve.

  See here:

  Configuration error. CC, CS

• Error rings using codes.txt and error do not allow entries parameter as rings custom error message?

  The ring of the error is very useful, especially with its parameterized inputs, you can specific with %s, %f and %d parameters.  I would do the same thing in my error codes fixed using the ring of the error so that I can locate them in several languages, but it seems that LabVIEW files text Project never error codes detect or accept parameter entries, you get a ring of the error, but no input parameter.  If you use the same string in a client error code, it gives the setting entry but then his hard-coded and you can not locate it.  What gives?

  Is there another way to configure the rings of error to use a project file for the error codes but still supports parameter entries?

  Thank you Esteban but I think you're confusing what I'm asking.  The ring of the error is for the treatment of custom error codes.  Built in UNITS in the project files error may not take parameters, while that of custom, those who can.  See my screenshot.

  

• HP Officejet 4620: hpeprint used to work and now does not work

  I've registered to use hpeprint for a number of years and it has worked very well, although I don't use it very often. I had the opportunity to use it today and it doesn't seem to work. The printer is wireless and is great for everything else is not a local problem for me. I received an email from HP indicating that the print job has been received in too. Still not printing.

  Thank you very much for your help!

  PS Subsequent investigations said that "I have not all registered devices! Then when I put my claim code in the to add it again, the message says:

  "The request window that has already expired. Click on "what is a claim code?" below for instructions on how to print the fact sheet Web Services for re - activate the code request for 48 hours. »

  that I don't really understand! Sorry for being a thicko!

  Hey @JimRobinBSc,

  Welcome to the Forums of HP Support!

  I see that you have some problems with ePrint on your Officejet 4620 e-all-in-one printer. I can help you with that.

  First, a code of request is a way for HP connected connect a printer to an account. It has no use outside. That said, if the printer does not appear in the devices on the connected HP, this means that we connect the printer again. To do:

  1. On the printer, click the web services button that looks like a tablet with a phone beside her.
  2. If you see an email address click settings, scroll to remove Web Services and press on this subject to be deleted. When finished, click the web services button again.
  3. Press Setup and Yes. The printer should print a new claim code.
  4. Enter the claim code in the place under the devices tab which requires the claim code.

  Please let me know if this allows you to use ePrint or if you have any other questions. If not, have a great week!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

  My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

  19 code means there is a driver conflict such as two devices attempt to use the same
  resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• screen goes black and moves randomly please explain answer in detail as I use windows 10 and I can not understand the answers already given

  screen turns black and moves randomly when using most of the tools of photoshop.  I use windows 10 and cannot follow the above.

  Hi Nodstown,

  Greetings.

  • What version of PS do you use?
  • Mac or Windows, which version?
  • There may be several reasons for this.
    • Preferences corrupt.
    • Obsolete graphics drivers.
  • Solution
    • Try resetting the PS tools. (See screenshot)
    • Try resetting the PS preferences - to restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings.
  • • Update graphics card drivers
    • AMD - AMD Catalyst 15.10 Beta Driver for Windows
    • NVIDIA - drivers | GeForce
  • Also, try opening the PS, then go to preferences - performance and uncheck CPU chart use
  • Now, restart PS and then try to use tools again.

  

  Concerning

  Rohit

• using Windows vista and supported will not start

  Windows vista help and support will not start. Is it possible to download and re - install this feature.

  In addition to the guidance of Kim, I also recommend looking at responses MVP mind x here.

• SQL how to use a variable and use the result as a reference for the name of the table

  Hi all

  I have new in the declaration of Oracle, sorry in advance if something is easy for you all. BTW, I have this scenario:

  I have a table OL structured in this way:

  Date - it contains dates, for example 11/01/2015

  TableName - it contains strings, for example, OL1, OL2, OL3 and so on...

  Then I have a different table, the name of these tables are of the same name in the table of the OL, so I have table table, OL1, OL2, OL3 table and so on. The structure of these tables is the same. And Yes.

  table OL1

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 JOHN DOE 12345679

  2 PAUL 111111122 TIBBS

  table OL2

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 ANNA KRAIG (NULL)

  NATHAN FRESHMANN 111111133 2

  If the scenario is clear, I would like to retrieve the value (null), research in all the OL * tables by using the value of the OL table (tablename) max.

  If I'm going to do these simple steps, I got the result:

  Select max (TableName) OL

  the result will be OL2

  # I know not how to use the option set to avoid changing the table name in the sql statement all the time.

  set mytable = 'OL2.

  Select Name, family name

  of & mytable

  When the phone is null

  Any idea?

  Thank you very much in advance.

  Hello

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  bulk collect into v_result_set

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null';

  dbms_output.put_line (v_ol);

  end;

  Correct the code such as:

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null' bulk collect into v_result_set;

  
  

  for i in v_result_set.first ... v_result_set. Last

  loop

  dbms_output.put_line ('LOG ID: ' | ) ( v_result_set.log_id (i)) ;

  dbms_output.put_line (' NAME CLOSELY: ' |) v_result_set.presentation_name (i));

  dbms_output.put_line (' START TIME: ' |) ( v_result_set.begin_time (i)) ;

  end loop;

  end;
  

  Kind regards.

• Column headings on PL/SQL return SQL Query report using < br >

  Hello
  I want to create a report region based on a function that returns a SQL query. As a dem oI created the following:
  

  create or replace function xxjk_retsql return varchar2
  as
  begin
  return 'select i "column header" from wwv_flow_dual100';
  end;

  I want to be able to insert a line break in the column heading so that it wraps to two lines. I tried this:
  

  create or replace function xxjk_retsql return varchar2
  as
  begin
  return 'select i "column<br>header" from wwv_flow_dual100';
  end;

  However, when the region is rendered, it seems to strip on the HTML tag. I also tried another tag, < i > < / i >, as a test and it is deleted also.
  
  
  
  Is it possible to include a pause in a header of column in this way?
  
  
  Thank you

  Hello:

  On the attributes page choose "pl/sql" for the field type.
  For the pl/sql function, write something like

  return 'top1
  bottom:top2
  bottom2:.........';
  

  CITY

• I want to dowload thunderbird to receive my meails but it keeps using old data and I can not set up to receive on POP I tried this many times automatic

  I want to download Thunderbird to receive my emails from my ISP VirginMedia.
  How ever this automatic program beacue, I can't any howmanytimes I try to accept that
  I don't want IMAP, I need to use POP because its all the auto matic I don't even get the box to make these changes.
  It is possibole for you athunderbird to stop this, so I can use this program.
  If Itry to change it does not accept my correct address of VM

  Noreen Evans

  If you want to start over and delete what Thunderbird has already.
  Close Thunderbird
  on the start menu type %appdata%\protector.exe
  in the Explorer, delete the Thunderbird folder
  launch Thunderbird.

• How can I download Youtube videos on my mac? Real used to work and it does not longer.

  I can't download YouTube more. I have FF 20.0 and use mac os x 10.8. Real used to work, but no more.

  Hello tabarsi, you can use one of the many extensions available in addons.mozilla.org.

• Satellite Pro L650: cannot use Skype - cam and microphone are not connected

  Having problems connecting to Skype.
  It seems that the microphone and web cam are not connected.
  Skype self-test will not respond with the voice test.

  Hello

  Have you checked the Skype settings?

  There, you should check if the right microphone and the internal webcam have been chosen.

  By the way: is the webcam properly recognized in Device Manager?

  You can use the webcam using the preinstalled software webcam?