Can a vDR device cause multiple backup destinations?

Similar Questions

• Can a VPN 3005 cause multiple IP addresses on the external interface?

  Nice day

  Can a VPN 3005 cause several IPS on an external interface?

  I expect to use it in an environment that has 2 ADSL connections to an internet service provider. For the sake of the exercise, we could call them ROUTER1 and ROUTER2.

  We have a few VPN we always want to spend by ROUTER1 and some VPN we always want going through ROUTER2.

  Is this possible?

  Thank you very much

  No, not possible, sorry.

• Can system table space cause multiple data files in several places?

  Hi experts,

  Our current system has a partition to keep the system tablespace data files, but I assumed that the partition is wrongly estimated and the size was maintained only 2 GB. Now the partition's got full and it seems no way to increase the partition from the OS. The only option I have is to create the new data for system tablespace file in another free partition. Is this possible? I have to consider all things important before doing this? Also can I create new data with the regular create command file or need to do something special for system tablespace?

  Thanks in advance

  Yes, you can create two data files for system tablespace into two partitions.

  To reduce the space in the system tablespace - you should check what are segments that occupy the space in the system tablespace.

  To get the examples if you have the Audit DB - then you can move the table to tablespace someother depending on availability.

• Can a single button cause multiple targets, based on the value of the point?

  I have a button on a form and based on the value of an element, when clicked, pages must be accessible. Is this possible to do? If so, any ideas are greatly appreciated.
  
  Request Express 3.1.2.00.02

  It's pretty simple to do using conditional branches. Create a branch to the place of the appropriate branch (for example on submit: after treatment...) for each target page and series PL/SQL Expression condition for each branch:

      :request = ''
  and : = 
  

  its replacement by < button_name >, < nom_element > and < item_value > with the values appropriate to your application (and change the '=' in the expression of the agenda if some other condition is used). The integrated attribute REQUEST contains the name of the button that submits the page.

• VDR: Size of backup destination

  Hi all

  It's maybe a stupid question, but I have to ask. I have test VDR 1.2 and have configured a share as a destination and currently save a few machines with a total of about 450 GB allocated disk. Most of the machines is very similar, c-disk of 20 GB and 2008 R2, but the virtual machine also has a d-300 GB disk that is about half full (with vhd files). If I understand correctly, the first backup is full, then the rest is incremental. I expect the backup destination to about the same size as the actual data used, at least 150-170 GB since that's the size of the unique data for the virtual machine, I backup with VDR, but the size of the backup destination is only 29 GB. I totally hard works of VDR? No explanation will be greatly appreciated.

  Thanks in advance.

  GB

  Hello

  have a different opinion. Data deduplication on all incoming data recovery. Get rid of full/incremental view.

  When you first save a virtual machine all the data of this virtual machine will be read and recorded deduplicated. Second time datarecovery uses the followed the change block. Your vm writes a file (... ctk.vmdk), where he follows the changed blocks. Data recovery simply saves only the blocks changed since the last backup. You can call it incremental if you want, but from the point of view of the transfer data, these are all full backups. There is no dependency between backups.

  If save you a virtual machine with 150 GB and your destination of data recovery shows that 29 GB used - it is possible. It depends on what kind of data your saved vm a. imagine an Oracle database that uses several files that have a size of 10 GB left. If only 1 GB inside this file is used 9 are empty. Who will very well be deduped...

  Maybe inside your virtual machine vhd files are for the most part empty? Or has information that can greatly be deduped?

• I am looking to buy the package of photography and I have 2 PC at home - can I install this on multiple devices?

  I am looking to buy the package of photography and I have 2 PC at home - can I install this on multiple devices?

  Yes, you can install all software from Adobe on 2 computers which are mainly used by the same person but not both computers at the same time.

  This allows you to install on your desktop for work from home / office and a laptop when away from your home/office. But you cannot use LR and PS on both computers at the same time.

• I bought CS6, can I install it on multiple devices? Purchased as a home user

  I bought CS6, can I install it on multiple devices? Purchased as a home user

  You may install and use the software on one secondary computer. So you can use it at work and at home. See the following excerpt of the EULA.

  Can I use my software on two computers?

  If you have, or the main user, a single-user license or volume Adobe product that is installed on a computer at work, you can also install and use the software on a secondary the same platform, home computer or a laptop. However, you cannot run the software simultaneously on both primary and secondary computers.

  Not more than one user can use a product from Adobe single-user license.

  For more details, see http://helpx.adobe.com/x-productkb/policy-pricing/end-user-license-agreements-faq.html

• vDR (1.1) and backup on a network share

  Hello

  I want to install vDR backup on a network share, but wanted to understand the best practices for the network share and if it's OK for her, which will be presented on the virtual Center Server.

  Also, if I wanted to copy this network share broadband (for storage on the site off the coast) is this OK. Anything to be aware off the coast?

  I read a previous post and she suggested that I need to power of the vDR device, to ensure that the store of deduplication is not in use (no integrity checks / ongoing backups). Is this the case?

  Thank you very much

  If I save the Windows share on tape, outside the backup of vDR

  window still would be that I have to turn off power VDR or disassemble the

  Share?

  Yes, because other non-backup operations can still function.  This can cause issues of contention between VDR data and the application copies the data from the store of deduplication.

  Or, I was controlling access to the share (via command line /)

  changes of the authorization) to allow access during the backup window, then once

  the backup window is closed I remove permissions for vDR can not

  more access the share?

  Interesting idea - I had never thought about this.  Theoretically, it should work, but we have never tried on in-house.

  If I have limited access to the share on time would be the vDR go up automatically?

  I don't think so, you will have to do it manually.

  (b) If a backup, health checks or deletions where progress before a

  share has been deleted what happened to active employment? It initiates

  When sharing is restored? Any chance of corrupted data?

  There is always a chance that the VDR done at that point in time.

• Types of backup destination VMware Data Recovery

  IM test VMware Data Recovery and reading it can save to different destinations. Here's a sentence from of the Administrator's guide.

  You can store backups on network, VMDK shares, or RDM.

  The only option I see is the network share and make a folder called VMwareDataRecovery with other files and folders in it. If I backup more 1 VM to this nextwork share looks like it mixes everything together. I was under the impression that you can save in a file single vdmk.

  The only options I have under VMware Data Recovery for Destinations are Refresh, add a share of Nework, Format, Mount, Unmount, Extend and integrity check

  Remove you it from the virtual computer by means of the settings?  If so, have you selected the option to remove the virtual machine and remove the disc?  If you have them removed from the virtual computer through the settings, then you can delete browser data store.  It will come to your space.  Also, see IO errors is because you took the disk to the virtual machine without removing firstly by vDR Console's Configuration.

  That said, I would do the following:

  1. Ensure that the VM vDR does not any VMDK attached other than the VMDK root which is 5 GB in size.

  2. Open the browser of data store and make sure that the former VMDK you created have disappeared.  If not, select them and click on delete.

  3. Go to the Configuration Console for vDR and look at Destinations of backup to make sure there is nothing there.  There should be nothing in the list of destinations, if there are, remove them.

  4. After checking the above, create a new size 15GB VMDK.

  5. Restart your virtual machine of vDR

  6. Go into the Console to Setup vDR and select the disk that you created in the backup Destinations, do a right click and select format.

  7. The size should report something similar to what my screenshot of previous shows.

  I would like to know if that works for you!

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Can't see or delete the backup data

  I am struggling with what follows. I keep getting messages that my icloud storage is almost at capacity and I don't want my 5 GB storage capacity.

  When I go the app iCloud on any of my devices (1 x 5, 1 x iPad, Windows with iCloud App iPhone), it shows a graphic that the vast majority (about 4 GB off the 5 GB used) capacity is used by backups (a few photos, some mail). However, when I click on 'manage storage', he told me that the backups are "0 Kb". I can't select the data for backups and therefore cannot select or remove what it contains.

  In short, I don't need my devices stored in iCloud - I have a server at home and iTunes for this. I like to keep my photos and email on there, but it is there no space left. I had an old MacBook that went wrong and had several libraries of iPhoto on it that I think got corrupted who took loads of space, so it may be the culprit. But I no longer access that material so cannot connect to iCloud from that device.

  I did a temporary fix to my box with smaller letters, but don't see why I should limit myself to about 1 GB of data in iCloud when they offer 5!

  Any help most appreciated.

  same problem here, except instead of backups it says it's documents

• Help: I deleted a numbers document that was in iCloud. Can I restore from a previous backup?

  I deleted a document my iCloud numbers. A backup ran yesterday. I can retrieve this document of the backup and if I can how?

  Thank you

  Documents in your iCloud drive are not part of a backup to iCloud - iCloud: overview of backup and storage iCloud

  If you have an iTunes backup, then use instead. If you have another device connected to the same iCloud account and it has not been used recently, you can try to disable the wifi on it and then see if the copy local caching of the document pages is always on this device. But if it has synchronized with iCloud drive because you have removed it from the document, then it will not be there.

• Change backup destination

  Try to change the backup drive to flash drive f.  Have "Windows for Dummies" and can not change the backup destination.

  Hi ED,

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description, looks like you are facing a problem when changing the backup destination.

  It would be great if you can answer this question in order to help you further.

  What happens when you try to change the backup location, summers - get you any error message or error code?

  I suggest you to see the steps in the following article.

  Change where you back up your files: http://windows.microsoft.com/is-IS/windows7/Change-where-you-back-up-your-files

  Reference:

  Set up or change automatic backup settings: http://windows.microsoft.com/en-IN/windows7/Set-up-or-change-automatic-backup-settings

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• RMAN backup destination changed on disk

  11.2/Solaris 10
  
  We had implemented the backups for a DB go using tape

   
  CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default

  It worked very well.
  
  Yesterday we had to take a special cold backup for this DB on the disk. By using the FORMAT parameter to point to the location of the disk, I took this backup in NOCATALOG mode IE. using the control as the catalog file.
  
  Now, when I connected to the catalog for this DB and did a WHOLE SHOW. I see that the backup location is changed on the drive even in the catalog.

   
  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;

  This has happened because of resynchronization. I think so.
  So whenever I take disk based backups by using the control as the catalog file, I connect the real catalog RMAN schema and return to the location of backup using SBT_TAPE

   
  CONFIGURE DEVICE TYPE SBT_TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default

  ?

  Hi Max,.
  You can declare your allocation of channels within a block run like this:

  Run {}
  allocate channels c1 type DISK;

  backup of database format <..>more archivelog format <..>;

  output channel c1;
  }

  That she should not update the Setup value of the channels, rman to the Ribbon in the catalog or the controlfile.
  Rgds,
  Tycho

• Can change the default number of backup pieces in each backupset?

  I know that, by default, a backup set contains a single item from backup.
  So, I wonder how can I change this default number is greater than 1?
  
  I ask, because, as below, you can see that for a time backup, RMAN has created two backupset.
  And I want that it creates a rather backupset:

  RMAN> list backup summary;
  
  
  List of Backups
  ===============
  Key     TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
  ------- -- -- - ----------- --------------- ------- ------- ---------- ---
  3       B  F  A DISK        06-NOV-10       1       1       YES        TAG20101106T182618
  4       B  F  A DISK        06-NOV-10       1       1       YES        TAG20101106T182618

  Any help would be appreciated.
  Thank you

  PhoenixBai,

  For some reason, I couldn't read the full command. Now, I can see all.

  I'll share a few comments of your example.

  (* 1) control file backup *.

  RMAN automatically creates backup files of control under certain conditions.

  a. when the CONTROLFILE AUTOBACKUP is enabled

  b. when including CURRENT CONTROLFILE clause is used as part of the BACKUP command

  c. when the system datafile (datafile 1) is part of the input for you files BACKUP.

  With AUTOMATIC backup, RMAN creates a set for separate backup control file backup.

  Without AUTOBACKUP, RMAN backup of control file as well (but it could be in the same backup set or not according to the sizes of block)

  http://download.Oracle.com/docs/CD/E11882_01/backup.112/e10643/rcmsynta007.htm#RCMRF107

  d. what archive backup is enabled in 11g with option KEEP.

  # I think your case is without feature autobackup 'c '.

  -------------------------------------------------------------------------------------

  (2) why RMAN create 2 backup sets for the data file and backup control files?

  This is because the block of the control file and data file sizes are different.

  For each data file.

  You can query for each data file dba_tablespaces.block_size.

  For the control file,.

  In 10g, there isn't an easy way to get it. you would have to use internal views or caculate it.

  11 g, can be obtained in v$ controlfile.block_size.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17110/dynviews_1086.htm#REFRN30043

  As you may know, the control file block size is 16 k and hardcorded internally.

  ----------------------------------------------------------------------------------------------

  Comment:

  (1) I see that you create a backup that contains the data file 1 (System datafile). That is why RMAN creates backup files of control as well even without control file autobackup.

  (2) your output, the data file block size is 8 k, but control file block size is hardcoded as 16 K. It is not possible to keep the two different blocks in a single backup set.

  That's why RMAN separated your backup in two backup sets.

  Kind regards
  Sean

• How can I remove a time Capsule backups I want to recycle?

  How can I remove a time Capsule backups I want to recycle?

  Reformat the disk via disk utility. This will remove all the contents of the disc.