Can a weird question we use Data Guard to apply the bidirectional log?

Similar Questions

• How to use Data Guard with E-Business Suite

  Hello

  I'm trying to get my head around how would you use Data Guard with E - Business Suite.

  I know that you can use only physical standby with EBS, however I have a few basic questions about specific values < SETTING > and how they are treated by a standby.

  Given that the standby and primary servers will have different host names and that generally there are < FRAME > specific values that include the hostname, where they will have to change on the standby server, both from the point of view of the battery backup Apps and within the standby database itself, I wondered how it would happen.

  Usually, EBS cloning process would change the < FRAME > target settings in the target apps stack and the target database (for example, parameters such as FND_NODES etc.).

  Q1. However I do not know how the process of cloning E - Biz would fit with a database of the day before?

  Q2. As the standby database won't even be in an open State, I don't know yet how you would apply a party any of the cloning process to a database of pending to the target?

  Q3. Even if you were able to change on the eve of the database to reflect the < FRAME > from backup server, it would mean surely it was more a physical copy of the primary database, that's why it would be more a day before.

  All a bit confusing - any clarification appreciated

  Jim

  PL see if MOS Doc 1070033.1 can help you

• Repeat applies without using Data Guard

  Hello everyone,
  
  I would like to redo apply to a database of pending. Unfortunately, the DB's standard edition for Data Guard is not an option. Is there documentation on how to achieve something like the roll forward apply without using Data Guard?
  
  Kind regards
  Frank

  There are a lot of threads on this same forum on this specific topic.
  Please use the search (top right of page), and see the list of threads returned:
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=%2Bstandby+%2Bstandard+%2Bedition&objid=F61&DateRange=all&userid=&NumResults=15

  Nicolas.

• Flashback Database using Data Guard environment

  11.2.0.3/RHEL 5.8
  
  I came across several documents that speak of FLASHBACK DATABASE configuration in dataguard environments. We have several
  Physical DBs sleep (Single Instance & RAC) running in our shop. I would like to know two or three major (common) use of FLASHBACK DATABASE data child care settings.
  
  I understand one of the uses mentioned in the below URL ie. a logical error recovery
  
  http://uhesse.com/2010/08/06/using-flashback-in-a-Data-Guard-environment/
  
  I would like to know what are the other major/common use of Flashback Database River in environment DataGuard

  A few other uses:

  (1) flashback allows you to test your DR. So you can activate your watch. Test the connectivity of network/applications and features on your recovery site and when done return the database to a physical standby. It must however ensure that this is allowed in your environment. In some places, I worked, it would be a big no, no, because they have no needs of data loss. However some companies that will allow as long that the watch is delivered in place for some time.

  (2) in the case that you do a failover for a reason, but what has been the main site would then become available, you can flashback what has been your primary to make the eve rather than re-instatiating the database from scratch.
  For example. You have a power failure on your main site if perform you a failover and your watch becomes the principal. Once it's your main site is back online, you can convert your previous primary in a day before making a full return/restoration (or any method you choose) to recreate your standby again. However you also have the option to use flashback on this database and then convert it to a watch because it would be potentially faster than the re-instantiation of the day before.

• Physical movement of the databases using Data Guard

  Hi all

  We need to move our equipment to a new physical location.

  Our production database (11.2.0.4) is replicated to another computer using dataguard (MaxAvailability mode)

  The plan was to move the machine SRD first Monday, then the database of production during the next weekend.

  Do you have an idea how to do a 'pause' the replication when the move will take place for two servers?

  We do not want to do a failover because the production should not be available over the weekend.

  Thanks in advance,

  Renaud

  Do you have an idea how to do a 'pause' the replication when the move will take place for two servers?

  There is no such method of the break, but you could defer the primary log shipping to wait.

  ALTER system set log_archive_dest_state_2 = reporter; #assuming that log_archive_dest_2 on the primary it again waiting for ships

  But, you must make sure that the archives on the primary are not lost or deleted after reporter such as these are not available on standby.

  Once you 'enable' the destination deferred, Eve should automatically catch up with the primary.

  -Jonathan Rolland

• Data Guard Performance: apply Lag

  In Cloud control there is a measure called "Lag (seconds) apply" under a group called 'Data Guard Performance '.  I created an alert on this metric rule.  However, I want to know what thresholds are defined for this measure, if I look under the supervision of models.  He isn't here.  There are also a number of other Performance measures of custody of data that is, I can't find or add in templates.  Can anyone help?

  From the home page of a database on hold, you can navigate to the (Oracle database > surveillance >) metrics and Collection settings page and select all the metrics view to check or set thresholds for (Data Guard Performance) metrics apply Lag. Note that by default, no limit is set for this measure.

  Kind regards

  -Loc

• How can I add a stamp to date than auto from the opening, in the new Acrobat Pro?

  I found countless sites that explain how to create in older versions with coding like this (var f = this.getField("Today");
  f.Value = util.printd ("j/mmm/yyyy", new Date());). I can't find how to create now. I need the date automatically flood the current date at the opening. Help, please!

  I'm sorry, I misunderstood your question. When you mentioned "stamp", I thought you meant a dynamic stamp that you place on a document.

  The procedure to add a JavaScript to the document with Acrobat DC level is:

  1 select: Tools > JavaScript

  2. Select 'Document JavaScripts' in the toolbar that appears at the top

  3. give the new JavaScript document a name, like "init".

  4. click the Add button

  5. in the window that appears, delete all the code it provides by default (empty function) and enter the code you have posted originally.

  At the document level JavaScripts are run when the document is opened, so the code placed there will behave as you wish.

• How can I filter a table of data control without entering the query

  I have a table from a WSDL-based web service data control.
  
  I want to filter the table without input query in the filter text box. Without text filter box, each could filter the table with a query hardcoded internally.
  For example, when the user menu button click and then it filters the table where type = '1' and B menu button filters the table by type = '2' and C menu button filters the table by type =' "."
  
  How can I filter the table without entering the query?
  
  Could someone point me to a solution please.
  
  Thank you.
  11.1.5 jdev
  
  Published by: 893364 on October 26, 2011 12:15
  
  Published by: 893364 on October 26, 2011 12:21

  Hello

  When you have created the table, have you tried selecting the option "filter". Select the table, and access the property of m.. In the toolbar of the Properties Inspector, there is an icon to change the configuration. His fields of filter adding filter for the user to search in.

  Option 2: Data from the Web Service are actually held in iterators. If you want to filter the Web service request, I wouldn't use the WS domain controller but a proxy of JAX - WS in a POJO to recover data from the WS. Then the data control created from the POJO. You might have a method exposed on the POJO which allows you to filter the data internally that is held

  Frank

• can change hard drive I use data transfer or use the old key product key

  IM changing my drive hard sata to ide old ones and basically gets one more big one I was wondering if I can just coppy transfer data from my old hard drive to new, or just use the old produckt key really didn't wana must buy a new product key can anyone help or give me some info on this I would greatly appriceate it

  No, you cannot, if you want Windows 7 on a new drive with your programs and settings, then it is better you create a system image and restore it on the new drive. See the following for instructions:

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• I still do the full backup after using Data Guard?

  In our system, there is a physical database standby data protection configuration. Is it still necessary to do a full backup and an incremental backup?

  Jackliusr wrote:
  In our system, there is a physical database standby data protection configuration. Is it still necessary to do a full backup and an incremental backup?

  Preferred to have full backup of every day.
  May be you can perform failover of your sleep, in which case there is no availability on the primary database. So do you think that the stability of the monitoring system is the same as elementary school and can give the same performance?
  location of Eve may be too far and it's only disaster.
  Allows another case, suppose that your wait is behind that primary for 4-5 days due to some problems. At the same time your production crashed while you have the chance of data fo loose 4-5 days. Recommended to have a full backup still database primary.

  If you check the stability of database daily watch and able to check your data by opening properly and you want RMAN backup, it is fine. But it is highly recommended to have RMAN backup.

  BTW, you can have RMAN backup full standby, if you want to avoid the resources to be used on the primary

• Can power supply Question - I use the 230W power supply with a W540?

  I have a W540, which currently uses a power 170W (8.5 a 20V)

  I got also a docking station for a P50 that has a power of 230W showing 20V 11. 5a.

  The connectors are similar, but I'm hesitant to try the 230W power supply in the W540.

  It is allowed to use the 230W power supply with the W540?

  230 watts is maximum power feeding, it only provides the energy required by the computer.

  I sold my W540, so I can't test it for you. But I do use the ThinkPad X 1 carbon with 230 watts without no problem power adapter.

• 12 c multitenant, clone database using Data Guard?

  Hello

  11.2.0.3

  We have a database that uses the data custody (physical standby). Looking at the future, the ability to clone of the multitenant 12th century is really very nice.

  Someone has already tried to clone a physical database eve? That the cloning of the production database is one of the real benefits that we see today with 12 c. Cloning of the primary requires downtime.

  How you guys to clone your production in 12 c? Would be nice if we could clone the day before.

  Concerning

  3

  It is:

  create standby_2 of the pluggable database of Eve;

  Plug-in, database created.

  Take a look at the link in my previous post.

  Best regards

  mseberg

• QUESTION: SE 2012 data display returns to the time graph each time

  Hello

  I have SigExp 2012.

  If I try to add a data view and make a pledge of graphic style, thermometer, etc., as soon as I have the right up until it clicks, add my TC chain, the data view returns immediately to a graph time.

  In addition, even if I use the graph of time, once I added the signal, it only let me see the string in a table, a chart of time or a waveform graph.  Those are the only choices.

  If I use a graph of time or a band of waveform graph, it does not read the signal correctly, but I can not configure the data view, the way I want it.

  Is this a bug or I do something wrong?

  Thank you!

  This occurs when you try to change the display of a signal in its raw format "waveform".
  You must convert your signals in scalar format. To do this simply add an amplitude and levels step (under: analysis > measures Time-Domain). Drag this DC signal newly converted to a new chart and right click on the graph to change the display.

  Honestly, I'm not sure why raw waveform signals are inherently limiting viewing functionality, but in such cases, it is.

  You can also; According to the devices on which you use and the order in which you add to your DAQmx Acquire, some default signals step to scalar signals without having to convert.

  See the attached screenshot and you'll see how the icons are different between the waveforms and scalar signals.

  Hope that helps

• Can we average channel error using multiple channels to measure the same voltage?

  I don't know how correlated error terms are between measuring channels max, but it occurred to me that, if they were relatively independent, I might be able to sample the signal even with several channels and increase accuracy.

  For example, rather than measure a voltage with an AI only at 100 kHz, I could connect up to 10 different lines to HAVE the signal, sample to 10 kHz on each line.  This should allow to reach me on average some of the error associated with each channel (, or so I think).

  Can someone speak definitively to this?

  Thank you

  Sean

  Well, if you are using a MULTIPLEXED Board (everything is not specced for simultaneous sampling) then each channel is connected to the ADC even one after the other, best that you would be able to do is extremely, extremely small variations into the paths of each channel of the multiplexer.  This would still be massively overshadowed by the inherent noise from the system and the accuracy of the device.

  Your best bets to reduce the measurement error is to oversample in one way to reduce the effects of noise and to calibrate the unit before starting each test to keep variations of temperature.  In addition, make sure you keep your calibrated Board (most of the boards have a calibration 1 year of the cycle).

  For some applications, you should also consult wiring field and considerations of noise for analog signals, How to eliminate ghosting of my measurements? and Troubleshooting unexpected tensions, floating or crosstalk on Analog Input Channels to better account for ghosting and the issues of the hour.

• How can I call or even use a class library inside the application that has been downloaded along with the app?

  Hi all. I have a question?

  I have an application and a library.  Inside of the app have a lot of calls of this library (easy to say my app that is dependent on the library).

  I tried the following scenario: in the main application I added logic to download the library programmatically. But something I missunderstood around that. So, I'm first to download my application that depends on the library then I thought to check in the constructor, if the library exists then activate the app if not then download the lib and restarts the device.

  My problem now is if I call a list of class of the library, then the app not working and would be lifted except that «the application contains errors of audit»

  So, how can I avoid this? or even

  How download this lib from the app and have other methods inside this app called library which is not yet downloaded?

  Thank you in advance. A sample will be apreciated.

  No, which would require a second application, such as an installer