Can break some intersections Guide and not others

Similar Questions

• Inspiron 530 s CPU Upgrade - why some Dual Core and not others?

  Hi all

  Inspiron 530 s been chugging along fine (although strong), but has now been replaced, so decided to take a look inside, radiator & fan felt loose so unscrewed it and he lifted directly out absolutely no resistance, so I think that the cpu and the radiator cleaning and put thermal paste on would be a good idea.

  When I opened it, I thought that I might as well upgrade the processor as older bicoeur are going for about $10-15 here, (he currently has a 1.87? double heart in it), so I got a reading of the forum to find what was possible

  from the bottom of post

  

  quote - shesageordie

  Inspiron 530 s has a mother FoxConn G33m02 meets the specifications of Dell and will support the following Socket LGA 775 processors:

  Processor Intel Celeron 430
  Intel Celeron 420 processor (1.6 GHz, 800 FSB)
  Intel Pentium Dual Core 2140 (1.6 GHz, 800 MHz FSB)
  Intel Pentium Dual-Core 2160 (1.8 GHz, 800 MHz FSB)
  Intel Pentium Dual-Core E5200 (2.5 GHz, 800 MHz FSB)
  Intel Core 2 Duo E4300 (1.8 GHz, 800 MHz FSB)
  Intel Core 2 Duo E4400 (2.0 GHz, 800 MHz FSB)
  Intel Core 2 Duo E6320 (1.86 GHz, 1066 MHz FSB)
  Intel Core 2 Duo E6420 (2.13 GHz, 1066 MHz FSB)
  Intel Core 2 Duo E6550 (2.33 GHz, 1333 MHz FSB)
  Intel Core 2 Duo E6750 (2.66 GHz, 1333 MHz FSB)
  Intel Core 2 Duo E7300 (2.66 GHz, 1066 MHz FSB)
  Intel Core 2 Duo E7400 (2.80 GHz, 1066 MHz FSB)
  Wolfdale Core 2 Duo E8400, 3.0 GHz, 6 MB, 1333 MHz FSB, 65W, E0
  Wolfdale Core 2 Duo E8500, 3.16 GHz, 6 MB, 1333 MHz FSB, 65W, C0
  Wolfdale Core 2 Duo E8500 (3.16 GHz, 1333 MHz FSB)
  Wolfdale Dual-Core Kit, E8600 3.33 GHz, 6 MB, 1333 MHz FSB, 65W, E0

  Also, Intel Pentium E6500 2.93 GHz processor dual core.

  Before installing the processor, that you should check that you have BIOS Version 1.0.15 or above, when support for the new Intel processor has been added.

  Note: The Quad Core 2 processors are not supported by the Inspiron 530 s [Slimline]

  Bev.

  Theres now my problem

  Seem some of the processors used cheap available locally does not not at these figures (and they seem to be somewhat of Eug than those that match)

  for example the E8200 E6850, E7200, what of these processors prevents them from working?

  And as a note aside will upgrade the radiator and the fan, if I get a different processor?

  Nigelt74

  The E7200 and E8200 are 65w/45nm Wolfdale processors and should work.

  The E6850 is a 65w/65nm Conroe and will not work

  There should be no need to replace the entire radiator/fan of the 530 Inspiron s, but remember to check the version of the BIOS before installing the processor.

  Bev.

• Application of air using URLLoader w/HTTPS fails on some Win7 computers, but not others

  We have an Air (SDK 4.5) application, we are ready to deploy, but fails to connect via the HTTPS URL with error #2032 on some Win7 computers, but not others.

  For troubleshooting, I can reproduce the problem by using the example of app simple test given in the AS3 URLLoader documentaton.

  The problem is that when you run the application on some Win7 boxes, trying to connect to various servers via https and download a simple document, the request fails with "Error #2032".

  The version of the Air runtime is 3.0, and we have updated to 3.1 with the same result. The problem is related to the HTTPS only: the same URLS work fine with HTTP.

  Now for the fun: an application exact air works fine on another Win7 box, of the area of XP, OSX 10.6 and 10.7, pointing to the same URL HTTPS OSX.

  More fun: on Win7 boxes that in case of failure, it only fails with some https URL and not others, and URLS that fail with this Air app on these some win7 boxes work perfectly with the same air application on several others mentioned computers (XP, OSX and other win7).

  I know that #2032 Error is a very generic error "io" and could be the result of many things, but in this case, I did some research to isolate what could happen;

  on win7 boxes where the air application fails:

  If we point the air application on a virtual host on our setup of server apache with a self signed SSL certificate, the air application appears a sign saying the cert isn't trused, and if we click on 'continue', we get the error 2032 and a 0 http status code. Apache never logs on demand. This tells me that the application of air attempts to negotiate an SSL session with the apache server, but never succeeds.

  If we indicate the air even application a virtual host on the same configuration of Apache Web server with a REAL SSL cert, the air application never appears unreliable Panel, but still does not work, 2032 and the http status code returned 0.

  If we indicate the air even application a virtual host on the same server apache but HTTP instead of HTTPS, there is no failure and demand ends with an http 200 status code.

  Interestingly, if we note the same air application various other HTTPS URLS on different hosts, our servers and others on the internet that we know work, some fail the same way and some work very well.

  Now: If we run the same tests with the same air app, using the same URL HTTPS on other computers mentioned (XP, OSx and other win7), there is no failure and demand always ends well.

  Another finding: you could theorize that there is something wrong with those boxes of win7, but the HTTPS URLS that fail with the air app, nice job on these boxes in IE and Chrome, also the same test app compiled as a Flex application and executed in the browser on computers that fail to work fine with the same HTTPS URLS that fails and the application of air , for the air runtime of problems on some win7 boxes.

  It is a BIG problem for us, our Air application is a consumer application and will be widely deployed, and we cannot have it not be performed only on some computers and have no idea why.

  Any help would be apprechiated.

  Thank you

  Bob Reynolds

  Software engineer

  EDT

  PROBLEM SOLVED (mostly), however I end up with big problems in this...

  The problem was on the failure both Win7 boxes were sigficantly off the coast. Their synchronization solved the problem. I assume that others who have similar problems check the time on the computers/servers.

  This raises the question of why the AIR runtime cannot negotiate an SSL connection under this condition, but each browser we tested on those same computers could?

  I can buy that maybe the SSL protocol must by definition fail under these conditions, however for use by consumers, where it can not be controlled, the implementation must be loose to allow upward, and indeed all commercial browsers can negotiate SSL under these conditions connections (time synchronization offset) - ecommerce would be in trouble if consumers can probably not to connect to a service secured via Internet simply because the time is out of their computer.

  Can anyone in the Group Air address Adobe this concern on the use of AIR for applications of consumer under this condition where you can't rely on your application to install or run on who knows how many computers to consumers?  And to make things worse, AIR doesent provide revised, detailed error information so it is VERY tedious or impossible to even troubleshoot a comply with instructions like that--on the ground, it would be rather impossible.

  Thank you

  Bob Reynolds

• App version 32 crashes on an automatic update on some iPads and not others

  Hey guys,.

  Can they relate my iPad app crashes when the automatic update for some iPads and not others? Don't know how to correct the problem. Any ideas?

  When you rebuild your v32 app and when you submitted it to Apple? Apps should be built after September 13. See http://status.adobedps.com/?p=732.

  Also, what do you mean by "Automatic update"?

  Neil

• Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

  Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

  You are confused of RAM and disk space available.

  RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

  The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

  FYI, for your iMac, the maximum RAM is only 6 GB.

• Adobe enableld of the fillable PDF reader to display can be completed and saved on some machines and not others.

  I created the PDF (active player) and posted on my Web site: www.activeinhometherapy.com/contractor-opportunnities

  The forms can be downloaded, filled out, saved and re-opened successfully (i.e. the content is then re-opened) on some devices (MAC) and that on some PCs. In some cases, the form is saved, however, the content is missing when reopened. I don't know if it of a software problem or not. I need this to work for anyone to download, fill out, save and re - send regardless of their device: form w-9 to the application vendor and federal.

  Can someone please help me to solve the problems, or is there a better way to do this?

  This will happen to a PDF (enabled or not) form when it is opened and saved using the app on the Mac, as opposed to Adobe Reader. For more information and what you can do about it, see the following article: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

  People have reported something similar happens under Windows, but the exact circumstances were elusive, making the exact cause less clear. But you should be able to use the same approaches that are mentioned in the article.

  There is only so much you can make universally functional. Ago either Adobe spectators and a certain lack of support forms feature complete, and some haven't. Support is limited to same Adobe Reader for iOS, but this should work for basic with improvements based on JavaScript limited shapes (for example, setting the field shape, calculations, validations).

• Have trouble getting this script runs on the 1 cluster and not others

  Hello

  I'm trying to get it to run on a single Cluster, currently I run it on a single host, but I would like to run on a specific Cluster.

  Get-vmhost host1.lab.local | Get - view). EnterLockdownMode() | Get-vmhost | Select Name,@{N="LockDown; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto name LockDown

  I tried this, but this error message:

  (Get-Cluster 'Local' | get-view). EnterLockdownMode() | Get-vmhost | Select Name,@{N="LockDown; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto name LockDown

  Error message

  The method call failed because [VMware.Vim.ClusterComputeResource] contains a method named "EnterLockdownMode".

  On line: 1 char: 51

  + (Get-Cluster 'Local' | get-view). EnterLockdownMode < < < < () | Get-vmhost | Salt

  ECT Name,@{N="LockDown"; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto N

  SOUL LockDown

  + CategoryInfo: InvalidOperation: (EnterLockdownMode:String) [].

  RuntimeException

  + FullyQualifiedErrorId: MethodNotFound

  How can I run this for a single cluster and not the other clusters.

  Thank you

  Mike

  Try something like this

  Get-Cluster local | Get-VMHost | %{    (get-view $_).EnterLockdownMode()    $_ | select Name,@{N="LockDown";E={$_.Extensiondata.Config.adminDisabled}}} | ft -auto
  

• How can I remove putting highlight and notes when editing text and images? I right click about to yellow organ and I get no option.

  There is a yellow nail that covers the text and I can't remove it. Someone added a few notes and a highlight in my document and now none of us can take it off. Some elements of the note may be deleted at the same time. the border dotted yellow note box, and then the yellow color of the note box. I can't delete the note text, while the text of the note is persistent between the text of the document.

  I tried to do a right click on the yellow hightlight but I have no options to remove it.

  I tried to select the text you want to delete and delete text but the yellow highlight remains.

  Can someone provide suggestions?

  Hey ANP55,

  Thanks for posting on the Adobe Forums.

  Could if it you please let me know which version of Acrobat you are using.

  Once you have pointed out the text, comment will appear in the comments list. Select the comment in correspond to the highlighted text and select Delete (as below):

  

  Please try the same way and let me know how it goes.

  Kind regards

  Ana Maria

• SendTo: sendto drop-down box will be only sendto (e) player and not others

  in sendto drop-down box will only sendto drive (e) and any other

  Here's how to customize the send options in the context menu: http://www.howtogeek.com/howto/windows-vista/customize-the-windows-vista-send-to-menu/.

  Here is another option which is to download some freeware that makes the process of change the menu send to much easier:http://www.online-tech-tips.com/free-software-downloads/customize-the-right-click-context-menu-in-windows-xp-and-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I add a text (and not a sticky note)?

  I have Acrobat on my Windows computer and I can't seem to find an option to add a text, what I can do is add a sticky note, but not what I need. (However on my device iOS AdobeReader request I can add text.)

  Please help and thank you!

  Make sure that you use Acrobat, not Reader or Acrobat Reader.

• can recharge the system cd and not lose my data backed up?

  I want to know if there is way to reinstall windows xp and not olse current saved data/programs?

  Yes, if you have a real Windows XP installation CD and do an installation "repair" (see http://michaelstevenstech.com/XPrepairinstall.htm).

  No, if you have a CD provided by the manufacturer "valuation".  These CD restore (or 'recover') the system to its state of charge factory.

• Ideas for why HttpConnection works with some clients and not others

  Hi, I have an application that downloads and analyzes an xml file. This works perfectly for some users and does not at all for others. They can even access the XML on the web, but it won't work with my application. Some said they used a bold font, other OS 4.5. Here is an excerpt from my source:

  HttpConnection conn = (HttpConnection) Connector.open(url);conn.setRequestMethod(HttpConnection.GET);String _node, _element;DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();docBuilder.isValidating();Document doc = docBuilder.parse(conn.openInputStream());doc.getDocumentElement().normalize();NodeList list = doc.getElementsByTagName("*");// .. parse data
  

  Edit: formatting is all messed up

  Not necessarily. You * can * make your app to use BIS-B if you are a partner of the Alliance and I recommend this, but this is not necessary.

  Your customers can also connect using WAP 1.1, WAP2 or direct TCP. I would recommend that you try WAP2 first, this requires no info gateway APN or WAP. You can get the WAP2 info directly from the maintenance book.

  Try the code in the example (in the white paper that I attached earlier).

  Your best bet is to develop some hueristics of network connection using the CoverageInfo class (see the documentation of the API).

  We are doing something like this, at the bottom of the list:

  BES

  BIS-B

  WiFi

  WAP2

  WAP1.1

  Direct

  I think that in the USA, CA, UK and Western Union, BES and BIS - B cover approximately 90% of users. Once you walk out of those areas, it starts to be more exciting.

• Microsoft error reporting occurs again with several service packs that need to be sent in an error report. This happens on some machines and not others on a school campus.

  I noticed this error that occur more frequently on multiple machines only when connected to an administrator account. The error on some machines, but not the others if they were all created from the same image of a HD master.

  I haven't noticed any malfunction of applications, but this error occurs, breed a little bit is set.
  Images of the error:

  http://imgur.com/delete/6acg8Ddt2V
  http://imgur.com/delete/3auBhSinkL
  http://imgur.com/delete/m1Po7IPlZE

  ddefreit,
  Because it is related to a deployment scenario and is involving multiple machines, you will need to check with the TechNet site for the appropriate support.
  http://TechNet.Microsoft.com/en-us/Windows/bb264763.aspx
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Still Putting Black Bar on the right and on the left side of Some 16 x 9 movies and not others

  I have a problem with some of the movies in my project yet. Some of the 16 x 9 movies are ok, like this:

  

  But others have a black bar on the right and the left, like this:

  

  Today I have a deadline of 17:00. ANY help would be greatly appreciated.

  If you're downconverting hd to sd black bars are correct.

  This is due to the 16:9 HD and SD does not quite.

  To correct this see screendump:

  

• How to load a programe so can be observed in a single account and not others

  I want to load a programe in my administrator account and do not have what we see into account children on the same computer.

  I tried to load it, but all icons appear on all accounts.

  Tried to delete his account, but he is also my account and now cannot use programe.

  I have windows home Vista

  Hello

  1. is the account of children one Admin who has administrator rights?

  2. did you of recent changes to the system before the show?

  3. How have you tried to remove the program in the account of the children?

  4 are. what program you referring?

  5. what happens when you open the program now?

  Method 1:

  Follow the link below and uninstall and reinstall the program, and check if that helps.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Follow the link below and set parental controls for the user account and check if that helps.

  Set up Parental controls

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  In addition, check out the links below and check if that helps.

  Prevent children from using specific programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-children-from-using-specific-programs

  Control when children can use the computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/control-when-children-can-use-the-computer

  Let us know if it helps.