iPhone5 not ringing and go to voicemail

Similar Questions

• BlackBerry Passport Passport does not ring

  I used the 'meeting' mode and all future calls went to voicemail without ringing. I was told to do a security wipe and back to factory settings, which I did.

  now the phone rings, sometimes. I had the phone sitting in front of me, it does not ring and goes directly to voicemail. I don't know, but it seems if I type a message or by using another application, then the phone doesn't ring and goes directly to voicemail.

  This should not be the case. suggestions?

  I would like to know if this KB help!

  KB36391 not able to receive calls or text messages from numbers not stored in a contact in t...

• iPhone5 does not ring when it is locked

  iPhone5-16 G-

  iOS 9.3.1

  My iphone5 does not ring when it is locked

  during a call if I press the power button or any key, it sounds

  I checked "do not disturb" and silent and other key

  Hi mehdi.gh,

  Thank you for using communities Support from Apple!

  I understand that your iPhone sounds when it is locked. I see that you have already tried a few great troubleshooting as well.

  To continue troubleshooting, I suggest reading and working through the information in the following article. Some of these steps you have already performed, but for completeness, I suggest to work through all the steps.

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  See you soon!

• IPhone 4S don't ring and goes straight to voicemail

  My iPhone 4S don't ring and goes straight to voicemail. Is the Middle set.

  gkmurdick wrote:

  My iPhone 4S don't ring and goes straight to voicemail. Is the Middle set.

  settings - do not disturb - off

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  Try this restart your iPhone, iPad or iPod touch - Apple Support

  If this does not work, it may be a hardware problem.

  Hope this helps, good luck to you.

• I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  Hello Dulceallison,

  Please ask questions on iCloud and photos after the iOS 10 update here in Apple Support communities. We don't like hearing about questions after each update or upgrade. I am pleased to offer you some things to check to help you with your photos are blurred and alerts that you have received with iCloud.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, we need to verify your configuration and ensure iCloud library is enabled and check if you are using the storage optimization feature. Please open this help link: iCloud photo library. There is a section on titled mid-race "save space on the device. He talks about the storage settings optimize. When this option is enabled, you will get in their original, high-resolution images of resolution lower, while iCloud library keeps all your photos and videos. You can check and see what images are stored in iCloud by clicking on this link: icloud.com, sign in using the same Apple ID that is connected on your iPhone. Click on the Photos. If you use iCloud photo library, you will be able to see all your photos. Upstairs in the Center, it allows you to see Moments or Albums, and if you scroll all the way down it will tell you how many photos and videos that you have. Also, some scroll down and try to check a few who appear fuzzy on your iPhone. Icloud.com are also blurred it?

  If you use iCloud photo library, and even if you see lower resolution versions of the photos on your iPhone, they should not be blurred. Make sure that you have made a backup and then please go to settings > iCloud on your iPhone. Turn off the photo library iCloud, wait a minute or two and then turn it back on. It should be re - synchronize your iPhone with iCloud. Check if the images are still unclear. If they are, please fully sign off iCloud on your iPhone. There are options to save contacts on the iPhone, and other documents and other will be deleted form the unit. Don't worry, this information is recorded with iCloud and also saved in the backup. Once all signed, restart your iPhone. This article will help you if you need the steps to restart the appliance: restart your iPad, iPhone or iPod touch. Once the device powers turn it back on, go ahead and return to the settings > iCloud. Sign in with the same Apple ID that was signed previously. It may take a few minutes to return all documents, data, photos, contacts, and calendars, but once this is done, go ahead and check your photos. They match the icloud.com images? Are they accuse still blurry on your iPhone only? See if you can isolate a specific set of images, or if all the photos on the iPhone are blurred.

  I hope that steps with deactivation and activation of photos in iCloud or logout and back in iCloud has resolved the issue, but if not, please provide the information for the steps that we have achieved together so far and I'll be more than happy to continue checking of other options to get this working as expected with you. Thanks again and have a great rest of your day.

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• Samsung note3 does not ring when you receive a call

  The new version of Skype is bad. My operating system is 4.4.2 kit kat almost 100% of the time Miss l name because it does not ring. When I make a call and do it on the loudspeaker, it just for no reason rebascule on the speaker internal and if I'm on the blue tooth, it stops working on the blue tooth and I have to switch between the external speaker and back to the tooth of blues to hear it again which is very dangerous for driving. It also only connects to the blue tooth after 2 or 3 trys, entering my prius that this only happens with Skype if I use the t-mobile application that it works every time perfectly with everything l am reports that I have a Skype number and a number of t-mobile

  I have 2 samsung note 3 with the same software 4.4.2 kit kat, I have the latest version of Skype on 1 of the 3 note, and the other has the older version of Skype when a call comes in only one with older version rings.
  
  every now and then a new will work perhaps less than 1% of the time.
  
  There are many other people who have this problem. I wish that they would at least recognize that they have a problem!

• my iPhone does not ring

  my phone will not ring when making calls, texts or emails-phone-shop finds nothing wrong and say its faulty?

  Sorry to hear that

• I want my phone to ring when I get a phone call, but not ring when I get a text message.

  My phone is ringing when I get an SMS and it sounds when I get a phone call. I want to know if I can have my phone not ring or vibrate when I get a text Message, only to ring when I get a phone call.

  So, I want to:

  message text: no ring

  phone call: ring

  Thank you!

  very simple. Go to Configuration - notifications - messages - disable alert sounds

  or

  Definition of go - Sound - text alerts - set to zero

• My iPhone only more 6 does not ring when called.

  MY 6plus of the iPhone does not ring when called.  Any suggestions?

  You have probably already done this, but have you checked that the side button is not set to 'red' to mute calls, or that 'do not disturb' has not been activated accidentally?

  If one of the people are not the cause, have you tried a hard reset - restart by holding down the button power button and home button until you see the phone reboot with the Apple logo on the screen.

• Weird problem with control of the ring and foot

  So I have some sort of weird issue with a control of the ring and a chart. I'm with LabWindows/CVI on a Windows 7 computer. The part of the program I'm looking at is basically to navigate through data - there are several "transition" (rehearsals experience), and you can choose the one that you want to watch in the list.

  Normally, you would select transitional in the list, it plots the data, then it is done, basically. However, all of a sudden (don't know how long it spent for), when I select anything except 'Average', he made all the tracing and such, then it changes control of the ring to 'Average' (it is not plot the average data or generate all the reminders that I can tell).

  Now the thing the more bizarre as you can see below, it seems that the switch happens just when I draw something on the chart:

  

   

  So, it's just weird. The code in this section is here:

     if(uidc.polyon) {
              polynomial_subtraction(curr_data, np, uidc.polyord, 0); // 0 Skip for now
          }
  
          // Scale the curr_data for gains, then pre-scale the FFT data
          // to have no change in the power spectrum (multiply by (2/np)
          for(j = 0; j < np; j++) {
              fft_data[j] = curr_data[j]*2/np;
              curr_data[j] = curr_data[j]*uidc.fgain[i] + uidc.foff[i];
          }
  
          uidc.fplotids[i] = PlotY(dc.fid, dc.fgraph, curr_data, np, VAL_DOUBLE, VAL_THIN_LINE, VAL_NO_POINT, VAL_SOLID, 1, uidc.fchans[i]?uidc.fcol[i]:VAL_TRANSPARENT);
  
          // Prepare the data.
          FFTEx(fft_data, np, npfft, NULL, FALSE, curr_fft);  // Do the fourier transform
  

  DC is a structure that I use to better organize some UI controls and uidc is for display RAM variables, then dc.fid is the Panel that is embedded in the tab "FID", dc.fgraph = FID_Graph and corresponds to the chart control. Control of the ring is actually in a child Panel, dc.cloc [0]. FID_Graph has a point, it can produce, but the reminder is empty (no not coded something there yet).

  I have also considered that perhaps something in another thread (I don't think there is, but whatever) I see is the cause, however, this behavior still happens on that line. I tried to break in different locations, on hold, then continues, as well by adding a loop containing Delay (0.01), a loop of 100 times. Always happens after the conspiracy.

  Does anyone have any idea why this might be happening?

  Hi Paul,.

  I don't have a solution, but I wanted to point out that, even if you see the ring to change its value only when you call the function of tracing, that doesn't say what this function call that really changes the value of the ring. In CVI, some drawing operations are batched, for performance reasons, and the Panel updates only visually at certain times. One of those moments when you draw a chart data. Yes, the ring changes visually at this time there, but it is probably just 'catch up' a change earlier.

  As you are looking through the code, when the value of the ring, you can use the term > command update UI to force the update panel, so that you don't have to wait for the tracing function and see if all goes well this change happening earlier.

  Luis

• Sansa Fuze connects, but does not load and does not appear on my computer.

  Hello everyone.

  I have a 4 Gb Sansa Fuze, which is (of course) out of warranty.  I have been enjoying his music for quite awhile and have had absolutely no problems with it until two days ago, when it ran out of battery.  I left it in my car and the next day went to connect via the USB port on my computer.  The sansa has begun with its typical "splash screen" reading "Sandisk Sansa, followed shortly after by a blue moving the ring and the words 'Connected', followed by about a second later"writing", followed by a second. later 'connected'  This is normal for my fuze (that I know).  However, the problem with the logo of the battery in the bottom right of the screen, which normally indicates a small "lightning bolt" next to the battery and it shows the battery 'filler '.  Now it shows only a white empty battery.  There is no bolt of lightning, and there is no charge to the battery.

  I have tried to consider the sansa as a device via "My Computer" and sync in Windows Media Player.  None of them show that I have nothing connected.  The sansa updater doesn't recognize not my rocket is connected.

  I know for a fact that the USB loader is not faulty, as I also have a second Sansa Fuze that connects perfectly and was purchased at the same time.  I don't think that it is the slot USB itself that I changed the port to all others and still did not have a change in the status of my sansa (broken).

  If it helps is that I connect to the computer:

  HP Pavilion m7580n

  AMD Athlon 64 X 2 processor Dual Core 4400 +

  2 GB DDR2 RAM 1.8 GHz

  Windows XP Media Center Edition SP2

  Thanks in advance for any help that can be given...

  also, I would like to apologize if this has already been discussed (I read until my eyes hurt and couldn't find something similar).

  Thanks again,

  Josh

  UPDATE:

  Apparently the good things come to those who wait (and leave that their Sansa rockets connected for days despite the hopes of oinitial n it will load).  Today I woke up and found that my Sansa Fuze, which previously were not load had miraculously blamed himself.  I have unfortunately no idea as to the reason that he works all of a sudden.

  Thanks for your help anyway!  It is good to know that there is a place to come when your Sansa is broken...

  Thanks again,

  Josh

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.