Can call unlimited speed page task another page of unlimited workflow

Similar Questions

• Invoke a workflow with Pages of a workflow with Fragments

  Hi, I am a newbie in the ADF and my first time posting here. I designed an application that consists of an accordion panel on the left, with a dynamic region on the right, whose content changes in a fragment of a different page depending on what choice the user clicks on in the Panel of the accordion. So far so good. Everything seems to work well.

  Some of these fragments that appear on the right side have buttons that need to call jsf pages (fragments of not). But here's where I'm stuck. I tried to create a workflow to represent this type of navigation, but anyway, I tried to do it themselves with the error that I can not reference a page of a workflow that consists of fragments.

  How can I make a call to another page, from a button in a page fragment, using workflow?

  Thank you

  User, tell us your version of Jdev, please!

  The problem is that trying to navigate to a full page of a region. You can use a parent navigation which then calls the other workflow. Another option you can try is a goLink or goButton with the blank target to open a new page or tab.

  Timo

• How can I copy one page to another one of my Web sites and publish it on one of my sites?

  How can I copy a page from one of my Web sites and display it on another?

  For any page either direct or added to your muse site, but not included in the navigation, you can use

• How can I extract some pages from my document and save it as another file?

  How can I extract some pages from my document and save it as another file?

  You will need Adobe Acrobat to do that, not Adobe Reader.

• Is there a telephone number where I can call someone? The phone number in your web page is missing a num

  Is there a telephone number where I can call someone? The phone number in your web page is missing a number. It is listed as 1-800-426-570? A number of missing. I just paid with my credit card in line for photoshop and it does not allow me to connect to download.

  You can use the link https://helpx.adobe.com/utilities/credit-card.html top of page updated following card details & inform me by message private.

  It will be updated.

  Or you can contact the Adobe Support via http://adobe.ly/yxj0t6

  Concerning

  Baudier

• I can copy a Master Page from one document to another?

  HI - it is perhaps a fundamental issue, but I did not yet understand the answer. I have a site .muse with a Master Page that I used... I want to use the same Master Page on another .muse site that I'm working on. Is there a way I can copy the Master Page of the site ended up in it that I work? Any help is appreciated.

  Thank you

  Blair

  Hey Blair,

  You should be able to do by simply selecting (Ctrl + A) and copy (Ctrl + C) all content from the page master of the Site1 and paste in Place (Ctrl + Alt + Shift + V) into the master page of Site2.

  Thank you

  Vinayak

• How can I save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  I can't save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  Hello

  Included with Windows Notepad text editor allows you to configure the layout including headers, footers and margins. These options are normally not saved between sessions, but with this Notepad tweak can be done to save the changes. Please try this method and answer us.

  Open your registry database and find or create the key below.

  A. go to start and regedit and press ENTER.

  B. HKEY_CURRENT_USER\Software\Microsoft\Notepad

  C. create a new DWORD value called "fSavePageSettings" and there the value '1' to save the settings page.
  D. create a new DWORD value called "fSaveWindowPositions" and it "1" to record the position of the window.
  E. restart Windows for the change to take effect.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• How can I add a page control tab at run time?

  Hello

  I'm trying to add pages in the control tab in run mode, but I can't because it must be in edit mode.

  Here are the steps that I have:

  1. run the application.

  a. the application reads a txt file and it translated into a table with the number of rooms; [201, 202, 203, 204]

  b. the application takes this array and puts in place of the pages after how it is in the table and names must be the same as the numbers. (Now the program will start to collect information to fill the pages.

  c. the user can now change between pages. (Each page will have a table that will be updated with new information at run time)

  Is this possible or have you another solution?

  Grateful for answers.

  No, you cannot add pages, just as it is not really supported to add commands or the lights either (well, unless you plan to have always installed LabVIEW and not only the execution engine. If this is the case you can self-generate tabs etc. with VI Scripting pages).

  You can use an image control to "simulate" additional tabs, the orders or the lights, but normally it is possible to find a different and easier solution.

  In your case, it seems that all the pages have the same controls on them, it would be just the content that would change. So what you really want is a way to navigate between the 'rooms' availability You could add a list next to the tab control box, fill the list box with the availability of the rooms and the value of the list box to select the content to display on the tab of single page beside him, or you can use a menu drop-down. If you do not like these alternative presentations of the room options then you can generate the tabs in an image control and have a tab control page below which showed the content of the tab selected in the image control. That's a lot of work.

  Another option would be to create Let's say 10 pages in edit mode and then have the arrows under the control that allowed the user to navigate through the available rooms in groups of 10 (still is not really necessary to individual indicators on each page you don't need to make them on page... something to get this must simply move the indicators and controls on the tab control with the) arrow keys Cela will give you a black frame behind them, but in run mode, it will look as if they are on each page). In this way, you could have the appearance tab and navigation without having to simulate the tabs with an image control. The fact that many other graphical interfaces have such navigation of two levels means that the user will still find intuitive to use.

• Is it possible, or we can save an entire page of a document as an image or a picture file?

  Is it possible, or we can save an entire page of a document as an image or a picture file?

  Is it possible, or we can save an entire page of a document as an image or a picture file?

  Press Alt-PrntScrn to capture an image of the current application window to the Clipboard. Open Paint (or another graphics program) and press Ctrl + V (e.g. dough) to put the image in a new file. Crop and/or resize as you wish then Ctrl + S to Save the file in a folder.

  PrntScrn without Alt captures the entire desktop. Windows 7 has it's own Snipping Tool but there are options for freeware for Windows XP. I have no personal experience with a tool cutting XP so I refuse to recommend all.

• can open the home page but can not load other Web pages.

  I recently installed a network of a company of friends. They have a 8 computers on their network. To start connected the modem cable to router linksys n wireless and then I plugged an EZXS16W linksys 16 port switch. Everything works very well for about a month, until last week. Everything starts fine in the morning when they turn on all computers and continues for a few hours. After that, they can open their home pages (each computer has a differnet one) but when you try to view another web page, it can take up to 10 minutes, or never at all load. If I reboot the router and switch everything goes back to normal several hours then happen again. Any help would be greatly appreciated! Thank you!

  Hi going to T,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to business networks and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/categories/

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Add Device sees wireless but printer is plugged and can reach the HTTP page on wire

  I installed my new 8000 Officejet Pro A809 with an ethernet but when I run the Wizard "Add Device" of HP, it trys to install as wireless even though I select wired and the installation fails.

  I can see the page http for the printer and it presents information healthy of mind on my printer, so I think that ethernet is currently working.

  I am running Windows XP with the FW off. The printer is on the same switch as my PC & of course, I can see the http page

  In the wizard, even if I choose ' Wired ' of course the wire works, page "Found network printers" shows that the connection is wireless. None-the-less I click next then a screen appears for "from Network Services" & it rolls well, topology, wireless services, etc., and sending a SLP request the IP address it fails & shows a picture of a wireless signal and a big red X.

  HP Home Network Diagnostic Utility says that software to connect to the network printer is missing, BUT I ran the wizard completely if a second time, I chose my camera wasn't online and it ended up OK. I ran the UPDATE of the utility & he did an update to security; I have rand again and he found none.

  Although my FW is off, I checked the ports that the FW Guide are necessary:

  I can telenet to the printer on port 9100 & 92200

  I can not telnet on port 137 139 or 427

  Ideas?
  Thank you!

  Larry Holt

  OK, plug the printer Ethernet cable must turn off wireless radio printer, but in the cases where it does not, click the button to light blue (or go to settings > network > turn off wireless on the front panel).

  Now, you don't have to bother with the add devices Wizard, we will just add it manually:

  Verify that you can access the web page internal to the printer by its IP address.  If you can not, disable firewall for your security system (not the Windows Firewall, it is usually not in the way).

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• cant edit newly downloaded pages but can change the downloaded pages, a long time ago.

  Hello

  Dreamwever CC.  IPower web.

  If I download a new page, everything is fine, but if I try to edit this page - looks that it transferred but the changes do not show on the web.
  tried clearing taken - delete all old items.  don't know how to remove broken links.

  If I make changes to an existing page everything is normal - I can even change his name but I can download a new page and then edit it.

  do I need to provide more information?

  Thank you.

  Tom

  As far as I know, iPower uses regularly the same as other Apache .htacess files web hosts.  No suffix.

  Maybe if it was created with your cPanel has another name, I don't know.

  The simplest thing to do is to contact your host and ask them if they are caching of the html files.

  Nancy O.

• why I can't navigate from page two to secure the other pages

  Hello everyone,

  I have created secure login page and can normally connect by username and password, and redirect me normally on the second page, but the second page I can not navigate to the third, when I do remove the security I can usually navigate between pages

  This my adfc_config

  <? XML version = "1.0" encoding = "UTF-8"? >

  "< adfc-config xmlns ="http://xmlns.oracle.com/adf/controller"version ="1.2">"

  < id view = "usage_details" >

  usage_details.jspx < page > < / print this page >

  < / view >

  < id view = "General_Reports" >

  General_Reports.jspx < page > < / print this page >

  < / view >

  < rule of flow control = "__2" id >

  usage_details < of-activity-id > < /-activity-id >

  < control-flow-case id = "__3" >

  Gen < from outcome > < / de-results >

  General_Reports < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < / control-flow-rule >

  < managed-bean id = "__1" >

  loginBean < managed-bean-name > < / managed-bean-name >

  view.loginBean < managed-bean-class > < / managed-bean-class >

  application of < managed-bean-scope > < / managed-bean-scope >

  < / managed-bean >

  < / adfc-config >

  and that's my jazn-dat

  <? XML version = "1.0" encoding = "UTF - 8" standalone = 'Yes'? "" >
  "" < jazn-data xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"
  "xsi: noNamespaceSchemaLocation ="http://xmlns.oracle.com/oracleas/schema/jazn-data.xsd">."
  < default = "jazn.com Kingdom-jazn" >
  < domain >
  < name > jazn.com < / name >
  < user >
  < user >
  Nihad < name > < / name >
  Nihad < display name > < / display-name >
  mEKt9XT9Dvnfjmi5kphbCuzuyvZY6PiZ < power > 903 {} < / qualifications >
  < / user >
  < / users >
  < roles / >
  < / domain >
  < / Kingdom-jazn >
  < policy store >
  applications <>
  < application >
  < name > usage_details < / name >
  < app-roles >
  < app-role >
  < name > ManagerRole < / name >
  oracle.security.jps.service.policystore.ApplicationRole < class > < / class >
  < display name > role manager < / display-name >
  < member >
  < member >
  Nihad < name > < / name >
  oracle.security.jps.internal.core.principals.JpsXmlUserImpl < class > < / class >
  < / member >
  < / members >
  < / app-role >
  < / app-roles >
  < jazn > political
  <>grant
  < dealer >
  < directors >
  < principal >
  < name > ManagerRole < / name >
  oracle.security.jps.service.policystore.ApplicationRole < class > < / class >
  < / main >
  < / directors >
  < / dealer >
  <>permissions
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.welcomePageDef1 < / name >
  Display < share > < / actions >
  < / authorization >
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.welcomePageDef < / name >
  < action > customize, grant, customize, view < / actions >
  < / authorization >
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.usage_detailsPageDef < / name >
  < action > customize, grant, customize, view < / actions >
  < / authorization >
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.General_ReportsPageDef < / name >
  < action > customize, grant, customize, view < / actions >
  < / authorization >
  < permission >
  oracle.adf.controller.security.TaskFlowPermission < class > < / class >
  < name > /WEB-INF/task-flow-definition.xml#task-flow-definition < / name >
  Display < share > < / actions >
  < / authorization >
  < / authorization >
  < / grant >
  <>grant
  < dealer >
  < directors >
  < principal >
  < name > anonymous role < / name >
  oracle.security.jps.internal.core.principals.JpsAnonymousRoleImpl < class > < / class >
  < / main >
  < / directors >
  < / dealer >
  <>permissions
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.loginpagePageDef < / name >
  Display < share > < / actions >
  < / authorization >
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.errorPageDef < / name >
  Display < share > < / actions >
  < / authorization >
  < permission >
  oracle.adf.share.security.authorization.RegionPermission < class > < / class >
  < name > view.pageDefs.welcomePageDef1 < / name >
  Display < share > < / actions >
  < / authorization >
  < permission >
  oracle.adf.controller.security.TaskFlowPermission < class > < / class >
  < name > /WEB-INF/task-flow-definition.xml#task-flow-definition < / name >
  Display < share > < / actions >
  < / authorization >
  < / authorization >
  < / grant >
  < / jazn-policy >
  < / application >
  < / applications >
  < / policy-store >
  < / jazn-data >

  and this is my loginbean

  Overview;

  Import javax.faces.application.FacesMessage;
  Import javax.faces.context.FacesContext;

  Import javax.security.auth.Subject;
  Import javax.security.auth.login.FailedLoginException;
  Import javax.security.auth.login.LoginException;

  Import javax.servlet.RequestDispatcher;
  to import javax.servlet.http.HttpServletRequest;

  to import javax.servlet.http.HttpServletResponse;

  
  weblogic.security.URLCallbackHandler import;
  Import weblogic.security.services.Authentication;

  Import weblogic.servlet.security.Utils;
  Import weblogic.servlet.security.ServletAuthentication;

  
  public class loginBean {}
  private String _username, _password;
  
  {} public void setUsername (String _username)
  This ._username = _username;
  }

  public String getUsername() {}
  return _username;
  }

  {} public void setPassword (String _password)
  This ._password = _password;
  }

  public String getPassword() {}
  return _password;
  }
  
  public String doLogin() throws {LoginException}
  String _username =;
  Byte [] pw = _password.getBytes ();
  FacesContext ctx = FacesContext.getCurrentInstance ();
  HttpServletRequest request = (HttpServletRequest) () .getRequest () ctx.getExternalContext;
  Subject mySubject.
  try {}
  mySubject = Authentication.login (new URLCallbackHandler (UN, pw));
  ServletAuthentication.runAs (mySubject, request);
  ServletAuthentication.generateNewSessionID (request);
  String loginURL = "/ adfAuthentication?success_url=/faces/usage_details.jspx";
  HttpServletResponse response = (HttpServletResponse) ctx.getExternalContext (m:System.NET.FtpWebRequest.GetResponse ());
  RequestDispatcher dispatcher = request.getRequestDispatcher (loginURL);
  Dispatcher.Forward (request, response);

  
  } catch (FailedLoginException e) {}
  FacesMessage msg =
  new FacesMessage (FacesMessage.SEVERITY_ERROR, "name of invalid user or password","invalid username or password");
  ctx.addMessage (null, msg);

  } catch (Exception e) {}
  Returns a null value.
  }
  
  Returns a null value.
  
  }
  }

  
  

  and help him please.

  
  

  Change this line

  String loginURL = "/ adfAuthentication?success_url=/faces/usage_details.jspx";

  TO

  LoginURL = string ' / adfAuthentication? "success_url = / faces/usage_details";

  Timo

• can we rename master page?

  Can rename us Master Pages?

  Yes

  Right-click on the name of the Master Page in the palette, and then choose Options of Master for 'xxx '...

  Here, you can change the name, the number of pages in the Master, and if it is based on another master