Can Cisco 1041N WAP be configured as a standalone device
I'm on a remote site, and we've been futzing with configuration it's WAP site. But it is looking as if it was
intended to be used in conjunction with a central controller. Is it possible to operate it as a stand-alone
device as the old 1200 (miss me a lot lately).
According to the Cisco Software Download Center, you can load independent IOS in the AP 1040.
Products
Wireless
Access point
Cisco Aironet 1040 Series
Cisco Aironet 1040 Series access point
IOS Software
Follow the procedure below to convert the CAPWAP AP to standalone IOS.
By using a TFTP server to revert to a previous version
Tags: Cisco Wireless
Similar Questions
-
Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?
Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?
I have (2) AIR-SAP2602I-A-K9, configured the same way.
on two different remote LANs.
They don't seem to be handing out addresses via DHCP.
{If I connect to a local network with another DHCP server}
wireless devices can obtain addresses
This another DHCP server on the LAN through the access point.}
I followed 12.4.25d. JA.cg.pdf
Configuration of the Access Point to provide the Service DHCP 5-22
---------|---------|---------|
e.g. 3444-RCS1-AN #show running-config
Building configuration...
version 15.2
3444-RCS1-YEAR host name
no ip Routing
USH - DM IP domain name
DHCP excluded-address IP 192.168.29.89
IP dhcp RCS1 pool
network 192.168.29.88 255.255.255.248
router by default - 192.168.28.1
Rental 1 0
interface BVI1
IP 192.168.28.211 255.255.254.0
no ip route cache
default IP gateway - 192.168.28.1
---------|---------|---------|
---------|---------|---------|
e.g. 3444-RCS2-AN #show running-config
Building configuration...
version 15.2
3444-RCS2-YEAR host name
no ip Routing
USH - DM IP domain name
DHCP excluded-address IP 192.168.129.81
IP dhcp RCS2 pool
network 192.168.129.80 255.255.255.248
router by default - 192.168.128.1
Rental 2 0
interface BVI1
IP 192.168.128.171 255.255.254.0
no ip route cache
default IP gateway - 192.168.128.1
---------|---------|---------|
Thats the DHCP Pool range 192.168.29.88 through 192.168.28.95
Well this will confuse your customers.
And this is NOT how to set up your "range". See below:
DHCP excluded-address IP 192.168.29.1 192.168.29.87
DHCP excluded-address IP 192.168.29.96 192.168.29.254
IP dhcp RCS1 pool
network 192.168.28.211 255.255.254.0
router by default - 192.168.28.1
Rental 1 0
-
How can I transfer OR-MAX configuration files during the installation of the application?
I install my application on a PC that has no software EITHER. The installation installs LV Run-Time and NO-DAQmx, OR MAX, but MAX configuration is the default value. I use a USB DAQ. I know that I can export the correct MAX configuration file but I don't know where to put it on the PC so that he sees MAX.
Thank you.
If you choose to include the harware config when you create the installation program, then you do not have to worry where it is placed and during the installation process, MAX on the new pc will attempt to import it
If you want to manually copy the configuration on the new pc, put it anywhere you want. You must use the file > import the max function in order to use the new configuration.
-
Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that. I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k. I've changed this before clicking on the button configure on the playback device, manage audio devices. But now, this button is disabled and I can't check the set up or make changes. I am logged in as an administrator user, how to re - activate the button set up?
Thank you
Darren
Hello, I have stopped the Windows Audio Service and rebooted a couple of times. Now I have his back.
Thank you
-
I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes
Hello
1. what operating system is installed on the computer?
2. when exactly you receive this pop up?
3. able to play sounds using Windows Media Player?
Please provide more information on the issue so that we can better help you.
In the meantime, try the troubleshooting provided in the link below steps to solve the problem.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
-
How to restore the configuration in new FireSIGHT (device RMA)?
How to restore the configuration in new FireSIGHT (device RMA)?
FireSIGHT need new license again or not?
Licenses are issues associated with the license key of the management FireSIGHT pole. The key is a combination of the type platform (model) and the MAC address of the server.
So, Yes, you will need more reissued. The case of the TAC which obtained you the RMA can serve as the basis for a request to the team of licensing for the reissue.
-
someone can help m ' porq mi pc no image los devices or the wevcam
someone can help m ' porq mi pc no image los devices or the wevcam
HelloPlease select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:Thank you -
How can I contact Sandisk for the support of my device warranty refurbishing Fuze e280?
How can I contact Sandisk for the support of my device warranty refurbishing Fuze e280? It came without a manual or an other such info...
I called SanDisk to 866-726-3475. They gave me a case # and took me through the steps to retrieve and format the e280. They did not go to any purchase information. After following the instructions, the e280 worked like new.
Thank you
E C Yarter -
can't get the drivers for the cd/dvr device does not read or write
original title: can not get the drivers for the cd/dvr device read do not or writeing
How do car keys DVD for read or write on vista premium. the drive has failed. ?
Try to run planned it from this link:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems -
Hello
My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding). All the other computers in my house are connected without difficulty. Any suggestions?
Thank you
I solved the problem. When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router. When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.
Thanks for your help!
-
If I have Windows Embedded POSReady 2009 license can I install Windows Embedded POSReady 7 on my device? Whether or not I need a license document saying that.
You should ask on the forum dedicated Windows Embedded:
-
Cisco ACS 5.2 with NX - OS (Nexus) devices user - questions
Hey, I have a really strange problem with Cisco ACS 5.2 and Nexus NX - OS devices.
I create an account on ACS, let's call him User1 and give privilege 15. With User1, I am able to access on all our IOS, IOS - XE, ASA and PIX devices with privilege 15.
When I use the User1 account in our NEXUS devices, I do NOT receive the access privilege 15. As you probably know, the NEXUS devices have roles: predefined or custom roles. So I assumed I would get the role of "network-admin" (15 private read/write) User1 when you connect, but instead I got the role of 'vdc-operator' (private 1 read-only).
Then I tried to twist User1 and give network-admin under profile Shell > Custom Attributes. I logged in the NEXUS and of course I was able to get a network-admin access. However, my access to ALL other devices (IOS, ASA, PIX, etc.) does NOT work! I am not even able to connect with my login and my password for these devices.
Has anyone ever experience this problem? Help, please!
Thank you
neocec
This is a common problem when you mix with RBAC and IOS devices authorization policies, the pair av that you created must be set 'optional' instead of 'compulsory', please make this change and you will be able to access all your devices.
Thank you
Tarik
-
Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you
Hello
1. have you checked the problem by plugging the headset to another computer?2. it worked before?3. What are you talking about ""device"is not connected?I suggest you to connect to another computer and check.Also check if the device is compatible with Windows 7.Reference:Windows 7 Compatibility CenterIf it's compatible, perform the methods belowIf it is not compatible, see the following articles:What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsMethod 1: Run the audio Troubleshooter and see if it helps.Open the audio playback troubleshooting utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-TroubleshooterMethod 2:Run the Fixit described in the article and perform the steps:No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsSee also:Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsI hope this helps. -
How can I transfer all my applications paid on another device through the creative cloud? I have them on both my computer a laptop in the past, but the clouds of my computer wiped when I had to get it fixed and lost all applications. When I went to reinstall some applications say 'install' and some said to 'try', even if I've already paid for them. Please help, I need these applications to the school.
Hello
Please refer to the threads creative software says cloud my free trial has expired, but I have a paid subscription
Or you can see the steps from here: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html
Let us know if this worked for you!
-
How can I save my picture for the web and devices?
How can I save my picture for the web and devices?
I can't find the option when I want to save the image
Hi jacquelineb,
What version of Photoshop are you using?
If you are using the latest version of CC, please consult export images Adobe Photoshop for mobile and web. Tutorials Photoshop Adobe CC
Let us know if that helps.
Kind regards
Assani
Maybe you are looking for
-
My iPod allow me to activate iMessage what I do?
I tried to update my software to restart my iPod for just waiting to see if it was just a glitch. But the little button which slip you on the screen turns green to allow the iMessages jumps over the other side immediately as soon as you touch it. It'
-
W30T-A-101 - battery #2 satellite: Absent - even when it is docked
After his return from the first W30T-A-101 because of his failure, we are now on a second unit. The second unit appears not to recognise the second battery in the keyboard; or there is a problem with Windows 8.1 and the material. Battery #1 watch loa
-
Key and original Windows XP disc has activation with the re-installation problem
My old machine running on Windows XP Professional exploded in April. I bought a new one and installed the original software (performed by a technician here in SA) disc. Microsoft raised a question on the authentic software and I provided all the orig
-
How to stop automatic duplication photos that I delete
My computer automatically duplicate photos when I remove it from my computer or images
-
bug strange number of bin on HP4015 with drivers HP PCL5 universal
Hello We have 3 trays on a HP4015 so usually the numbers in the source document on the client side are: automatic, tray 1, 2, 3. Now, with HP universal PCL5 drivers on the client side we have number of tray: automatic, 241, 3972, 725, 726, 727 platea