Cisco vpn client to connect but can not access to the internal network
Hi all
I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network
Any help would be much appreciated.
Hi Samir,
I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(The link above includes split tunneling, but this is just an option.
Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.
Let me know if this can help,
See you soon,.
Christian V
Tags: Cisco Security
Similar Questions
-
I want to delete my browsing history, but can not access to the Firefox window.
My Firefox has been implemented by a COMPUTER technician to take me directly to ATT/Yahoo email. I can't clear the history, or access a Firefox screen to define who, according to the tutorial.
How do I do that in my configuration? What I'm trying to takes me to Att/Yahoo.
Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).
- Tools > Options > privacy > Firefox will be: "use the custom settings for history".
- Uncheck the box: [] "always use the navigation mode private.
- Press the F10 key or press the Alt key to bring up the hidden menu bar.
You can attach a screenshot?
- http://en.Wikipedia.org/wiki/screenshot
- https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
Use a type of compressed as PNG or JPG image to save the screenshot.
-
WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network
I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you
Firewalls are disabled on remote computers?
-
Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?
Try going into settings > general > reset > reset home screen presentation.
-
share external hard drive
I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external. Advice please.
geraintjo
I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)
-
I have a cc has photoshop & lightroom, but can not access the mobile app for my ipad, I get a free 30-day trial?
Hi Michael,
Please try the below mentioned steps to activate Mobile with Lightroom.
- Kindly sign out and sign back into creative cloud on your machine: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
- Please also synchronize lightroom desktop and mobile with the steps mentioned in the link: using Adobe Photoshop Lightroom | Lightroom - computer desktop and sync Mobile app
Thank you
Atul Saini
-
I bought the kit the student creative cloud after the expiration of my first free month of the trial. Now I can not access all the apps.
Hi zackf49452714,
I'm sorry for the inconvenience caused.
Please follow the steps https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Let us know if this helps!
-
Cisco VPN Client 5.0.0 does not connect
Hello
I am trying to establish the VPN session the firewall to 5525 X Cisco ASA crossing 9.1.1 Cisco VPN Client. Although AnyConnect is the way to go, the inherited method must always be supported for some time as part of a migration. I tried two VPN users (authenticated by ad) on two client computers running Windows 7 64 bit and Cisco VPN Client 5.0.07.0440. Both users are able to establish a session to a computer at the ASA, but not the other. Entering credentails evil, the login popup will appear immediately. On the combination of username/password correct name, the following VPN client log messages are generated and the session drops that is "not connected" in the status bar. The PCF file is the same on both client computers.
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7601 Service Pack 1
119 22:49:16.933 06/23/13 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 203.99.111.44.
120 22:49:16.939 06/23/13 Sev=Info/4 IKE/0x63000001
Starting IKE Phase 1 Negotiation
121 22:49:16.942 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 203.99.111.44
122 22:49:16.973 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
123 22:49:16.973 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, KE, NON, ID, HASH, VID(Unity), VID(Xauth), VID(dpd), VID(Nat-T), NAT-D, NAT-D, VID(Frag), VID(?)) from 203.99.111.44
124 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer
125 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH
126 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports DPD
127 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T
128 22:49:16.974 06/23/13 Sev=Info/5 IKE/0x63000001
Peer supports IKE fragmentation payloads
129 22:49:16.977 06/23/13 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful
130 22:49:16.977 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to 203.99.111.44
131 22:49:16.977 06/23/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
132 22:49:16.977 06/23/13 Sev=Info/4 IKE/0x63000083
IKE Port in use - Local Port = 0xCA7C, Remote Port = 0x1194
133 22:49:16.977 06/23/13 Sev=Info/5 IKE/0x63000072
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end IS behind a NAT device
134 22:49:17.000 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
135 22:49:17.000 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
136 22:49:17.211 06/23/13 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
137 22:49:17.211 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
138 22:49:23.207 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
139 22:49:23.393 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
140 22:49:23.393 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
141 22:49:23.393 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
142 22:49:23.401 06/23/13 Sev=Info/5 IKE/0x6300005E
Client sending a firewall request to concentrator
143 22:49:23.401 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.99.111.44
144 22:49:23.427 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
145 22:49:23.427 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.99.111.44
146 22:49:23.427 06/23/13 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.2.193.69
147 22:49:23.427 06/23/13 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 10.2.5.2
148 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(2): , value = 10.1.5.2
149 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD: , value = 0x00000000
150 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001
151 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000F
SPLIT_NET #1
subnet = 10.0.0.0
mask = 255.0.0.0
protocol = 0
src port = 0
dest port=0
152 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = example.org
153 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS: , value = 0x00000000
154 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc ASA5525 Version 9.1(1) built by builders on Wed 28-Nov-12 11:15 PST
155 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT: , value = 0x00000001
156 22:49:23.428 06/23/13 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = Received and using NAT-T port number , value = 0x00001194
157 22:49:23.445 06/23/13 Sev=Info/4 IKE/0x63000056
Received a key request from Driver: Local IP = 10.2.193.69, GW IP = 203.99.111.44, Remote IP = 0.0.0.0
158 22:49:23.445 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 203.99.111.44
159 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
160 22:49:23.477 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME) from 203.99.111.44
161 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 86400 seconds
162 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x63000047
This SA has already been alive for 7 seconds, setting expiry to 86393 seconds from now
163 22:49:23.477 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
164 22:49:23.477 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:NO_PROPOSAL_CHOSEN) from 203.99.111.44
165 22:49:23.478 06/23/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, DEL) to 203.99.111.44
166 22:49:23.478 06/23/13 Sev=Info/4 IKE/0x63000049
Discarding IPsec SA negotiation, MsgID=F3E3C530
167 22:49:23.478 06/23/13 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65) reason = DEL_REASON_IKE_NEG_FAILED
168 22:49:23.478 06/23/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 203.99.111.44
169 22:49:23.479 06/23/13 Sev=Info/4 IKE/0x63000058
Received an ISAKMP message for a non-active SA, I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65
170 22:49:23.479 06/23/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(Dropped) from 203.99.111.44
171 22:49:24.310 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
172 22:49:26.838 06/23/13 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=CD65262E1C3808E4 R_Cookie=912AE160ADADEE65) reason = DEL_REASON_IKE_NEG_FAILED
173 22:49:26.849 06/23/13 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
174 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
175 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
176 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
177 22:49:26.855 06/23/13 Sev=Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
Any ideas why the second client of Windows 7 does not work?
Kind regards
Rick.
Rick
Thanks for the additional output. It shows the xauth authentication step, which is good to see. But it does not offer much clarity on what is causing the problem.
My attention is drawn to a couple of message on the balls that are in line with the two sessions for which you posted newspapers.
32 00:36:08.178 24/06/13 Sev = Info/5 IKE/0x6300005E
Customer address a request from firewall to hub
I'm not sure that we see any answer to this, but it makes me wonder if it is somehow involved in the issue. Is it possible that there is a difference in the configuration of firewall and operating between two clients?
I am also interested in this series of posts
48 00:36:08.210 24/06/13 Sev = Info/4 IKE / 0 x 63000056
Received a request from key driver: local IP = 10.2.193.69, GW IP = 203.99.111.44, Remote IP = 0.0.0.0
I don't know why the pilot requested a key at this point, and I wonder why the remote IP is 0.0.0.0?
It is followed by a package in which the ASA provides the value of the life of SA - which seems to be on the path to a successful connection. that is followed by
55 00:36:08.350 24/06/13 Sev = Info/5 IKE/0x6300002F
Received packet of ISAKMP: peer = 203.99.111.44
56 00:36:08.350 24/06/13 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
during which the SAA indicates that no proposal has been selected. It seems therefore that the ASA is not happy about something.
If we do not find indications of the client that allows to identify the problem, then maybe we look at the ASA. Are all log messages generated on the SAA during this attempt to establish VPN that could show us the problem? Would it not be possible to run debugs on the SAA in a trial of this machine?
HTH
Rick
-
Get VPN client to connect, but request timed out when ping
Hi, I use the router Cisco 837 as my VPN server. I am connected using Cisco VPN Client Version 5. But when I ping the ip of the router, I have request timed out. Here is my configuration:
Building configuration... Current configuration : 3704 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname michael ! boot-start-marker boot-end-marker ! memory-size iomem 5 no logging console enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0 ! aaa new-model ! ! aaa authentication login default local aaa authentication login sdm_vpn_xauth_ml_1 local aaa authorization exec default local aaa authorization network sdm_vpn_group_ml_1 local ! aaa session-id common ! resource policy ! ip subnet-zero no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 ! ip dhcp pool michael network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 202.134.0.155 ! ip dhcp pool excluded-address host 192.168.1.4 255.255.255.0 hardware-address 01c8.d719.957a.b9 ! ! ip cef ip name-server 202.134.0.155 ip name-server 203.130.193.74 vpdn enable ! ! ! ! username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f. username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/ ! ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 crypto isakmp xauth timeout 15 ! crypto isakmp client configuration group michaelvpn key vpnpassword pool SDM_POOL_1 acl 199 netmask 255.255.255.0 ! ! crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac ! crypto dynamic-map SDM_DYNMAP_1 1 set transform-set ESP-3DES-SHA ! ! crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1 crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto map SDM_CMAP_1 client configuration address respond crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1 ! ! ! interface Ethernet0 description $FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 hold-queue 100 out ! interface Ethernet2 no ip address shutdown hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 0/35 pppoe-client dial-pool-number 1 ! ! interface FastEthernet1 duplex auto speed auto ! interface FastEthernet2 duplex auto speed auto ! interface FastEthernet3 duplex auto speed auto ! interface FastEthernet4 duplex auto speed auto ! interface Virtual-PPP1 no ip address ! interface Dialer1 description $FW_OUTSIDE$ mtu 1492 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp chap hostname ispusername ppp chap password 0 isppassword ppp pap sent-username ispusername password 0 isppassword crypto map SDM_CMAP_1 ! ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5 ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ip http server no ip http secure-server ! ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723 ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21 ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload ! access-list 1 remark SDM_ACL Category=16 access-list 1 permit 192.0.0.0 0.255.255.255 access-list 102 remark SDM_ACL Category=2 access-list 102 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 access-list 102 permit ip 192.168.1.0 0.0.0.255 any access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255 route-map SDM_RMAP_1 permit 1 match ip address 102 ! ! control-plane ! banner motd ^C Authorized Access Only UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED You must have explicit permission to access this device. All activities performed on this device are logged. Any violations of access policy will result in disciplinary action. ^C ! line con 0 no modem enable line aux 0 line vty 0 4 ! scheduler max-task-time 5000 end
Thank you, anny help will be appreciated.
Hi Michael,
I have been through the newspapers, they are not conclusive and only detrmine that Phase 1 is coming. However according to this error message % SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr = 81B50AD8, count = 0 we are hiiting a bug on ios. The id of the bug is CSCsl24693 and the solution is to switch to 12.4 (11) XJ.
Can you re-execute him debugs and send me the detailed results.
Kind regards
Aman
-
Hello
I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.
is hell config please kindly and I would like to know what might happen.
hostname horse
domain evergreen.com
activate 2KFQnbNIdI.2KYOU encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
ins-guard
!
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
192.168.200.1 IP address 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_FREEMAN
nameif outside
security-level 0
IP 196.1.1.1 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_TIGHTMAN
nameif backup
security-level 0
IP 197.1.1.1 255.255.255.248
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa844-1 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS server-group DefaultDNS
domain green.com
network of the NETWORK_OBJ_192.168.2.0_25 object
Subnet 192.168.2.0 255.255.255.128
network of the NETWORK_OBJ_192.168.202.0_24 object
192.168.202.0 subnet 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
Access extensive list permits all ip a OUTSIDE_IN
gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
!
network obj_any object
dynamic NAT interface (inside, backup)
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10
Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
monitor SLA 100
type echo protocol ipIcmpEcho 212.58.244.71 interface outside
Timeout 3000
frequency 5
monitor als 100 calendar life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto backup_map interface card
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
!
track 10 rtr 100 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 15
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntunnel strategy
Group vpntunnel policy attributes
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntunnel_splitTunnelAcl
field default value green.com
internal vpntunnell group policy
attributes of the strategy of group vpntunnell
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl
field default value green.com
Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password
attributes of user name THE
VPN-group-policy gbnlvpn
tunnel-group vpntunnel type remote access
tunnel-group vpntunnel General attributes
address VPNPOOL pool
strategy-group-by default vpntunnel
tunnel-group vpntunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group vpntunnell remote access
tunnel-group vpntunnell General-attributes
address VPNPOOL2 pool
Group Policy - by default-vpntunnell
vpntunnell group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565
Hello
1 - Please run these commands:
"crypto isakmp nat-traversal 30.
"crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.
The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.
Please let me know.
Thank you.
-
I can find the Device Manager device under modems, but can't see it in my network connections. I want to make a shared service for internet, for a second computer connected to the host pc via an ad-hoc Wifi hotspot (that works).
I use IE 8 and windows XP on a Sony viao VGN-TX5XN.
Hello
I suggest you refer to the article below and check if it helps:
http://support.Microsoft.com/kb/870702
Also, check out the articles below and check if that helps:
http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_02april08.mspx
The steps from the link below also applies to XP:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network
http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx
Hope this helps,
-
Cisco vpn client 5.0.07 no internet access
I am trying to configure access remote vpn for the ASA 5505 in my office.
The config is configured on my ASA, and I have cisco vpn client 5.0.07 installed on my laptop (64 bit) to Windows 7. I can start the vpn, put in my references and it seems that everything goes through, but once I'm connected, I lose access to the internet, and I cannot ping anything (4.2.2.2, 192.168.1.1 (gateway), etc...)
I keep seeing something uncheck the "use default gateway on remote network", but this option is available in the TCP/IP properties. Any suggestions?
Eric,
This should be the last change. Looks like you don't have inside the network split tunnel.
Here is the entry you need to do
TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
disconnect and reconnect. It should work like a charm.
Thank you
Bad Boy
-
Data on the iMac, but can not access the files.
Hi all
I have a iMac Core 2 Duo (3.33, 21.5 inches) since end 2009, running 10.6.8 Snow Leopard and I'm trying to recover some files that seem to be there, but I can not access it due to an update of the unfinished software.
A few years back, I tried the Mavericks update using an external hard drive as the boot drive (at that time there I ran 10.6.7 Lion), installation is never ending and I accidentally deleted this file to start on the outside, so I ended up coming back to his moose BONE, 10.6.8 Snow Leopard.
He seems to resemble a new install of Snow Leopard, except my old files (about 350 GB) still live on this subject, but I can not access all of the files, or does not even appear in the Finder.
Would appreciate any advice or tips on how to do to recover my invisible files. Thank you!
Do you see the drive in disk utility?
- Connect the external drive
- If it has external power supply, make sure that that is connected
- If the external hard drive has a power button, make sure that it is set to
- Goto docking station
- Click on finder
- Goto menu bar
- Click the menu go
- Choose utility
- Double-click disk utility
The drive will appear in the left column of the disk utility?
If the answer is Yes, if you click on the drive, and then click on check, what disk utility say?
-
VPN client without access to the internal network
Hi all
I try to get IPsec VPN clients talk to my internal network. Can ping the IP address of internal port, but not the bridge beyond the period of INVESTIGATION, or all the resources on the internal network.
Thoughts?
Hello Tony
You need to check on the following things
1. Split tunnel network
2. "no nat" split tunnel network
What is a network or production test (I hope that the customer have the right configuration of bridge)
Also, if possible please post your config for a better understanding
concerning
Harish
-
XP SP3 can not access Win7 on home network
W/SP3 XP can't access Win7 on home network but Win7 can access XP. XP m/c gets good ping response of Win7.
Things, I tried but still have the problem:
I turned off of Win7 and XP Firewall and antivirus. When you try to connect a network drive, I've included the password on Win7. Win7 was on and off homegroup. I shared C: authorized "everyone". Implemented the new location of the network on Win7... as well as a few other things. It still does not.
Follow the advice in these articles:
Sharing files and printers with different versions of Windows
Networking of computers running different versions of Windows
Share files and printers between Windows 7 and XP Boulder computer Maven
Most Microsoft Valuable Professional
Maybe you are looking for
-
Satellite Pro A10 - WXP re-installed and unable to connect to the internet
Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...1 / ethernet controller. 2 / multim
-
Satellite L650 - Webcam does not work
Hello My built-in webcam does not work. Just bought the laptop a month ago. Tried everything, including the re - install the driver but no luck. one had the same front and so what to do?I want to try it out myself before I approach the service center
-
Please specify side SAR MotoG 2nd Gen
Hello I had ordered a generation MotoG flipkart.com 2nd (exclusive online seller in India for MotoGP) The SAR value which is mentioned on flipkart for Motorola 2nd generation (XT1068) is "the head - 1.022 W/Kg, to the body - 0.594 W/Kg. However, the
-
A Subvi block right-click Menu customization
Is it possible to customize the right click menu of a Subvi in the block diagram? For example, in the function Array build a right-click menu you can concatenate entries. Is it possible to create this functionality in a user created VI?
-
I own a laptop dv6-2150us I recently had to do a recovery on because he only will re-start after automatically download and install updates Windows (2011-09-16). After recovery has been made, and various resettlement programs, I found that I can't wa