Can ESXI settle w Red Hat server as host operating system?

Similar Questions

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Yes, you can, but not with the free upgrade, you will need to purchase a full license for Windows 10 to do this.

  Step 1: purchase a license:

  Buy Windows 10 family/professional edition

  Step 2: Download Windows 10 and create a bootable copy

  How to download official Windows 10 ISO files

  Step 3: Create the partition then install dual-boot configuration:

  How to: install a Setup to dual-boot with Windows 10 and earlier versions of Windows

• Photoshop elements 14 can be used with 10.11 El Capitan OSX operating system?  Thank you

  Photoshop elements 14 can be used with 10.11 El Capitan OSX operating system?  Thank you

  Hi Francisco,.

  Photoshop elements 14 can be used with OS 10.11

  Please let us know if you have any questions.

  Kind regards

  Abhishek Seth.

• PDF can be installed on a computer with a Vista operating system?

  PDF can be installed on a computer with a Vista operating system?

  Please check:

  • https://www.Adobe.com/support/products/PDFs/adobe_products_and_windows_vista.PDF
  • Run Acrobat on Windows Vista

  Concerning

  Stéphane

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• Linux Red Hat Server VMWare P2V

  Hello

  I have worked to something almost the whole day, but cannot make it work and thought that I should ask for help now. In the subject line of the present States, I need to convert a server running RHEL 3 to a virtual machine on a host running VMWare Server 2.0, no interruption of service, preferably with a physical box, but I'll deal with a small amount if necessary.

  I've seen a few comments and those showing how do, but all of them are intended to complete ESX or ESXi. I did the procedure on this page http://www.vladan.fr/how-to-p2v-linux-into-vmware-esx-server/, but when I get to the part of destination, I can't select my machine running in VMWare server. I tried different versions of the programs without result. Currently I am running:

  VMWare Server 2.0.0 build 128374 on Windows XP. Any help would be greatly appreciated. Thank you.

  When you run converter for Server 2.x, the destination type must be 'VMware Workstation or other VMware Virtual Machine' and then, you select a folder, local or remote, where he will place the files that you can then add manually to the server creates 2.x once these files are copied to any data store you use on the host 2.x server once the conversion is complete.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Red Hat Enterprise Linux 5 operating instructions

  I only managed to get installed DAQmx and running RHEL 5 and I wanted to put the instructions here in the hopes that I could save someone else a large part of the time.

  First of all, I want to thank all who have contributed to the forums OR regarding the DAQmx Linux software installation. Most of the information contained in this how-to came directly from these two positions: Fedora Core 6 How-to and Fedora Core 5 - kernel 2.6.20 - 1.5 NATION howto

  A special thanks goes to ninevoltz, who took the time to understand apparently most of this stuff on and even pushed back the developers of the core on the limitation of length of symbol of modpost.

  Here are the steps I took when installing a PCIe-6259 on Red Hat Enterprise Linux 5, 2.6.18 - 53.1.19.el5 kernel:

  1. Add UTS_RELEASE to the version.h file
     • CD /lib/modules/2.6.18-53.1.19.el5/source/include/linux
     • CP version.h.dist version.h
     • Cat utsrelease.h version.h.dist > version.h
  2. Create a link to asm_offsets.h with an underscore in its name
     • CD /lib/modules/2.6.18-53.1.19.el5/source/include/asm
     • ln s asm - offsets.h asm_offsets.h
  3. Modify the application of modpost to accept names of symbol more of 500 characters
     • CD /lib/modules/2.6.18-53.1.19.el5/source/scripts/mod
     • CP modpost.c modpost.c.dist
     • Change the line 1116 '#define SZ 500' to '#define SZ 1024 "
     • CD /lib/modules/2.6.18-53.1.19.el5/source
     • do (Note: this will fail, but will get far enough to rebuild the modpost program.)
  4. Download ni.com NIDAQ800_RedHat.iso and install it
     • Mount-o loop/mnt NIDAQ800_RedHat.iso
     • CD/MNT
     • . / INSTALL
     • CD
     • umount/MNT
  5. Remove the packages OR rusted, installed by NIDAQ800_RedHat.iso
     • rpm - e - nodeps nipali Edward nipxirmi niorbi nidimi
  6. Download NI-VISA - 4.3.0.iso to ni.com and install it
     • Mount-o loop/mnt NI-VISA - 4.3.0.iso
     • CD/MNT
     • . / INSTALL
     • CD
     • umount/MNT
  7. Recompile the kernel modules OR
     • / usr/local/bin/updateNIDrivers
  8. reset

  This procedure worked great on my system, I was still able to run the application/usr/local/bin/DAQmxTestPanels successfully. I had read that others had to wrestle with some MesaLib to make it work.

  Yes, whoo hoo! And, good luck.

  Warren

  
  

• ESXi on Local Sata HDD or SD card operating system

  I have most of esxi running on the HP Server with SD card.

  I have esxi servers mnay locations

  as I have not installed these or the person who installed did not transfer, I have no idea where the operating system is running.

  Is it possible to do a find the disk OS Esxi powercli news

  vsish or esxcfg-info can have this info somewhere for sure.

  Thank you

  Would this help (I guess that SD card facilities will be displayed as "embedded")

  {foreach ($esx in Get-VMHost)

  $esxcli = get-EsxCli - VMHost $esx

  $bootDev = $esxcli.system.boot.device.get)

  {if($bootDev.BootFilesystemUUID)}

  If ($bootDev.BootFilesystemUUID [6] - eq "e") {}

  Write-Host "$($esx.)". Name.Split('.') (Embedded [0]) ".

  }

  else {}

  $mountPoint = $esxcli.storage.filesystem.list () | where {$_.} {UUID eq - $bootDEV.BootFilesystemUUID} |

  Select - ExpandProperty mount point

  Write-Host "$($esx.)". Name.Split('.') ([0]) device boot $($mountPoint) ".

  }

  }

  else {}

  {if($bootDev.StatelessBootNIC)}

  Write-Host "$($esx.)". Name.Split('.') stateless, PXE boot from ([0]) $(bootDev.StatelessBootNIC) ".

  }

  else {}

  Write-Host "$($esx.)". Name.Split('.') PXE Boot from $($bootDev.BootNIC) ([0]).

  }

  }

  }

• How can I make visible iscsi drive to a guest operating system?

  Hello

  I have (AFAIK) working between our Poweredge 1850 servers and our AX150i iSCSI

  I have two vswitches implemented, each using a different network and on different networks. I can see my LUN and everything seems ok.

  In stock, I created two storage devices and am now looking to get this visible to my guest as a local disk operating system, so I can use them. It's the part that I am confused on that I see no way to do this.

  If I remember correctly, on our physical hosts as soon as I assigned virtual disks to servers, they have become visible to the OS and I left.

  I've attached screenshots of my main screens.

  Also, is this the right command to save my config servers (I'm on windows):

  vicfg - cfgbackup.pl - server & lt; Ip_serveur & gt; s & lt; filename & gt;

  Thanks (again).

  Hedley

  Hello

  I think you are trying to create a virtual hard drive as opposed to a raw disk mapping (RDM).

  If this is the case then what you need to do is change the settings of the virtual machine by right-clicking on the corresponding to your OS virtual computer that needs to access the disk asked again.

  Add a new device, select a hard drive, choose Create a new virtual disk, select the size you want and the data store that you want it to be on. The rest you can leave the default, check the summary reflects what you want and press Finish.

  Concerning

  Leafy911

  (Do not forget that you receive points you award points)

• SP1_ Windows Server 2008 R2 operating system error

  Server rebooted automatically and we get the error

  Failure of the operating system (control bug of Windows, STOP: 0x000000C2 (0x000000000000109B, 0x000000000000000C, 0 x 0000000000000007, 0xFFFFFA8040DCCCA0))

  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• where can I get a new copy of my windows operating system disks

  I need to reformat my hard drive. I can't find my original operating system disks. Ho do new copies? (Windows XP Home edition)

  If it is preinstalled with your PC, you will need to contact the manufacturer. Often, they will send you a copy of the disk if you are still under warranty. You can also use any other copy of Windows XP and activate using the product key available in a label on the CPU.

  If it's a retail copy, you need to talk to Microsoft and to pay for the copy. If it's Volume License, you can download the iso and burn it to a CD, or pay for the media.

• How can I reformat my laptop with the Windows Vista operating system?

  Hello

  Please advise how I can do a reformat of my laptop which runs Windows Vista OS that I don't have the CD or DVD drive? normally it is preinstalled by the manufacturer. Thank you

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• How can I change a FRENCH Windows7 Home Edition Premium Operating System in English?

  Hi all

  I just bought a HP laptop Pavilion with this Home Premium French Edition, Windows7 in France.

  I would like to have the operating system in the English language. Please note that it already came with the MUI and LIP pack but despite my efforts to try to have the OP converted into English, it just does not change :-(

  In addition, note that this is an a key QWERTY Board. I can deal with him, but I really wish to have OP in English so I can understand its additional features...

  I want to appreciate someone of you in advance.

  Ringuet

  PS: I went through the forum and messages but no one mentions anything about a WINDOWS7 HOME PREMIUM... Premium?

  Hello

  I've already selected English in my lap top Pack MUI that is came up with, as I said it remains in French despite my several attempts. I have a Premium Home Edition NOT an Ultimate or Enterprise version.

  It seems to me that I have no other choice than to download this Windows Anytime Upgrade... IF I go ahead and download it. It really goes to entirely replace the OP of the French into English?

  Is this software is reliable?  How much does it cost?

  In addition, please note that the digital site that you suggested to me it doesn't seem to work properly. Nevermind the fact that it only works on the full edition and Enterprise Versions of Windows...

  Thanks but no thanks...

  Hi Ramdas67

  The bottom line here is that you cannot use a MUI Language Pack in a Home of Windows 7 version.

  There are 3 third-party programs that say they can do this, but these programs have many problems and they also violate the license agreement for Windows 7 which can cause problems with the activation of the system.

  If the Windows Anytime Upgrade is available in your area, this will be your best option. It is inexpensive and only takes 15 minutes about to finish. There is no installation, it simply unlocks the features that are already on your computer.

  I hope this helps and please let us know how it works for you.

  Thank you for using Windows 7

  Ronnie Vernon MVP