Can external CD-ROM, I use it to restart my PC (Satellite 1900 803)

Similar Questions

• Need for external CD-ROM compatible for my Satellite W35Dt-A3300

  Is there an external CD ROM that is compatible with the W35Dt-A3300 Satellite?

  I think that it shouldn't be a problem for you to find the external optical disk drive. On the market, you can find many of them from different manufacturers.
  Toshiba offers several models that you can use with your laptop.
  Visit your nearest dealer and which external USB ratings is the right one for you.

  Your model of laptop has a USB3.0 port and you can use it to connect.
  Last year I bought a USB external Blu - Ray Combo ODD and use it with my little NB550 netbook.

• Can what external CD/DVD-Rom I use on Portege 3500

  Does anyone know what are the criteria for an external CD ROm for a Portege 3550? There are 3 units recommended in the forum that could restart the Toshiba Reinstall the Portege 3500 drives, 2 Targus and Toshiba 1.

  This seems very limited. In particular the 2793008 of Toshiba will do the job? No USB unit is recommended and it seems it takes a 16-bit interface - not a 32-bit.

  Can someone clarify please?

  Hello

  I don t think that it will be able to boot from USB key because the BIOS doesn t it supports.
  If you want to retrieve from the CardBus PCMCIA adapter you will need a special disc boot that allows the start of the PC 16-bit PCMCIA card.

  I found these drivers:
  Light Slimline CD-ROM 24 x, PX1052E-1NMD (16-bit PCCard)
  Slimline CD - RW 8 x / 8 x / 24 x CDRW, PX1054E-1NST (CardBus)
  Slimline DVD - ROM 8 x / 24 x, PX1053E-1NMD (CardBus)
  Slimline Combo, PX1055E-1NST (CardBus)

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Can I keep the CS6 programs on an external drive for future use?

  The hard drive of my MacBook Pro is almost full. I do not use most of the CS6 programs I have. I want to move them to an external drive. (I think they can be stored there already using Time Machine). Can I do this and uninstall them to free up space? I just want to later, in case I need it.

  Adobe Applications cannot be installed on an external drive.

  Kind regards

  Hervé Khare

• Problem to start on a toshiba external cd rom

  Hello
  I can't start on my external CD-rom Toshiba.
  His name is not in the startup list.but it works normally when I'm on windows.

  I want to install Ubuntu.so I have to boot with the live CD and install ubuntu.

  Consider helping me quickly

  And why do you think it should work?
  I don't know what laptop or desktop PC you are using, but it depends on BIOS support.
  Of course your hardware doesn't help start the external optical disk drive.

  What you need is access MS-DOS. This means that you must start your PC DOS memorandums of understanding and load the MS-DOS driver for optical disc drive for access.
  Quite complicated.

• Portege 3440 CT - need driver for external CD-ROM

  Hello

  I installed windows xp + sp2 on Portege 3440CT and PCMCIA card where is connect CD-rom is not recognized.

  I can't find the driver here, can someone help me?

  Thank you

  Hello Usi

  You do not have we sent the info on your external device you use and as a result I can tell you one: check the support or the download page of the external CD-ROM manufacturer.

  Is - this Toshiba one when you search it here?

• How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

  Hello

  How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

  I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

  error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

  These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

  Any help would be appreciated.

  Thank you

  -Neil shore

  Hi LaserShore,

  Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

  Already running 32-bit application? Have you changed references to the 64-bit version?

  You use Measurement Studio? If so some features are not supported with 64 bit.

  Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

• 9.0 can a dynamic nat be used via ipsec vpn?

  9.0 can a dynamic nat be used via ipsec vpn?

  We have a vpn and work between asa and when we run traffic through a static nat rule traffic goes over the vpn. When we use a dynamic nat traffic does not get picked up by the ACL vpn.

  We disable the nat rules to switch back and just so, even when we use the same destination to source the result is the same.

  Am I missing something with 9.0 versions of code? If I disable all the nats and pass traffic it goes via the vpn.

  So, it seems that when you use the dynamic nat statement, it pushes traffic to the external interface without looking at the acl of vpn. Please let me know if I'm crazy, I'm a newb on 8.3 zip code.

  Thank you

  Have you included in the ACL crytop natted ip address or range?

  You allowed natted ip address or range to the other end of the tunnel?

• Installation problem DVD Rom that uses Adobe AIR on Macbook Pro

  I am trying to install a DVD-Rom that uses Adobe AIR on my Macbook Pro. First of all, I get a message saying "(Installer Adobe AIR command line)" then I get a message saying 'the Adobe AIR version cannot be installed because a newer version already exists on your system'. " As soon as I finish this message Adobe AIR Application Installer and it seems that if I need to choose a different installation package, but I don't know what to do next. Can someone help me with this?

  Exactly what version of programs you install from your DVD, and what is the exact number of your Mac operating system?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Can what audio sources I use in iMovie?

  In iMovie, can which audio sources I use?  I find that only iTunes songs appear.  Can I use music from a CD?

  In addition to the iTunes music, you can use several common digital audio files as AIFF, MP3, AAC, Wave etc by drag and drop in iMovie. Griffin Technology makes a device called iMic which digitizes audio and connects to your Mac. It is a good solution to connect to your CD drive and scan the audio output digital file and send to the Mac. They also include scanning software. It costs about $50 and is a great way to get your CD, turntable, radio audio in iMovie.

• How can I buy an app using iTunes card? When I try, it will not treat... !

  How can I buy an app using iTunes card? When I try, it will not treat... !

  How do you mean "will not treat", what happens when you try to buy the app (if you get an error message which is his full text), and (according to means "will not treat") what have you tried to see if that fixes it?

• When you create a calendar in Photos for Mac, I can't work on the use of more than one Photo per month

  I created a calendar using Photos for Mac (picture 1,5).

  However, I can't create each month using several photos. It is the first calendar, I've done since the change of iPhoto pictures. I know I used to be able to choose various options for layout, including several photos in iPhoto. I just hope that it is something simple that I forgot.

  Thanks in advance.

  Right-click on a photo placed and select layout options - you have options from one to seven photos here

  LN