How to solve the problem of blue screen and PFN_LIST_Corrupt?

Hi, I need help from the community with this problem is driving me crazy, my PC off and get this error message.

Run memtest. If it has errors, replace the memory

Tags: Windows

Similar Questions

  • I need advice on how to solve a problem of blue screen.

    Whenever I leave my computer for 15-20 minutes, I get a blue screen.  The error message is the following:

    Stop: 0x000000F4 (0 x 00000003, 0x8AB5D588, 0x8AB5D6FC, 0x805D22AA)

    This line is followed with:

    Beginning physical memory dump

    The only way to close this blue window via the power on / off switch.

    I came back to an earlier backup and the same problem exists... I did a chkdsk /r recovery mode task, and that did not help... I took several recommendations that I found the Internet regarding how this fix did not work - nothing I've tried has solved this ongoing problem.

    Can someone give me a clue as to what the error is all about and how can I solve the problem?  Needless to say, I am lost on what to do next and any help sent my way will be greatly appreciated.

    Windows XP Pro Service Pack 3

    Frog

    Sorry that I was unable to return to it so far.  My computer decided to crash shortly after sending my first message in this thread.  A hard drive test informed me that she had not.  I decided to take my computer to the store for a new hard drive.  While there, the technology has attempted to re - install the software from my old hard drive on the new hard drive - that didn't work because the operating system was corrupt.  Thus, only the new operating system has been reinstalled on my new hard drive and I am just now able to get back to the internet.  Fortunately for me I had a backup of the system.  Although the back-up also had a corrupted operating system registered on it, this backup made allowed me to look at what was on my system before installation of my new hard drive.  In any case, I now work to restore the software that was previously on my computer.

    Yet once again, sorry for not responding not sent help my way - it was out of my control.

    Thanks for the replies.

    Frog

  • Pavilion dm4-2100sx: I have the problem of blue screen and I can't format my laptop!

    Hello

    yesterday, when I lunch my laptop its work for 15 min, then while I work on it the screen seems to be breakink, but it didn't, and some purple lines appear on the screen as this photo

    then I tried to restart my laptop, but this time it did not work at all. When start show me this

    then his flophouse to blue screen

    for the moment, safe mode is the only thing that works
    but everything is not the main problem, I think becuse with format I think it will be corrected
    the problem is that I can't go to the start menu to configure the new windows (if I want to format) because the ESC key will not work on my laptop

    So what I have to do to shape or even solve the problem of the mode safe without format
    Thank you

    is there a way to put in the form of safe mode dirictly without using menu planifiée?

  • How to solve the problems of Typekit fonts and error 500 when you publish the site of Muse.

    Hi guys. I'm a graphic designer and a web developer student. I recently created a site for a client using Muse and have problems downloading from the site. Typekit gives a 500 error code and stops the process of loading in "Export to HTML" and "FTP Upload". Any help. I would really appreciate it.

    Hi Kwacy,

    Please refer to: error: could not generate code

    Kind regards

    Akshay

  • Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

    Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

    This kind of message is a scam. Do not meet it.

    Force Quit Safari, then restart Safari while holding the SHIFT key.

  • My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

    My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

    Settings > messages > iMessage turn off then turn it back on...

    If it does not sign of your apple under messages ID.  Settings > General > reset > reset all settings (will not erase data).

    Then log in messages

  • How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

    Nice day

    How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

    with regard to my question above. I need to hold the button of power for 5 seconds to completely shut down my laptop. even restart or sleep does not work well. I upgraded a real victory 8.1 to 10 free victory by that windows app reservation offered. IM using acer aspire v5 - 573 g i7, version gt750m, Finnish keyboard

    solutions, I tried to random searches that did not work for me.
    1 unchecking quick stop to power options
    2 disabling hibernation in cmd (types a code forgot what I have)
    3. update all drivers and bios with sites acer official drivers, driver pack solution 15.8 and utility driver update intels
    4 decommissioning intel management engine components driver 11 to 9.5
    5. go to the bios and reset to the default settings
    6 make a shortcut of "shutdown" with codes e.g. shutdown /s /t 0
    7. click Update stop

    IM thinking of reinstalling windows 10 via recovery which removes applications, files, drivers, etc. and hope this solves. I can't roll back to win 8.1 because ive done this reset before you completely clean out my system of win random 8 and trashes the restore option was gone.

    Thanks in advance

    Hello/Hallo wuschel93,

    exactly what I had. Stop number appears only after a certain time the laptop running.

    The problem is INTEL MANAGEMENT ENGINE RELATED V.11!

    I fixed it with uninstall Intel Management Engine Version 11. Windows will then install version 9.5 automatically. After that I turned off the automatic update of the driver for this device. You can also install 9.5 without uninstalling the old one, it wil crushed.

    Other manufactures also have this problem, but while Acer is still asleep, they provide a solution (including download links):

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/sleep-and-shutdown-issues-after...

    Maybe there are any other issues that result in the same problem. But in most cases, it's the answer. The thread Starter maybe forgotten to disable the automatic driver update or made installation of v9.5 evil?

    TEPCO

  • How to solve the problems highlighted in each journal in the issues of the CBS

    Hello

    Please could someone help me decipher the CBS logs for two of my Vista machines and tell me how to solve the problems highlighted in each journal.

    Vista 1 machine has Vista Ultimate x 64 SP2 installed and has been implemented in the following way:

    • Installed Vista Ultimate SP1 from DVD
    • Apply all updates important, recommended, and optional through Microsoft Update
    • Applied SP2 via Microsoft Update
    • Apply all important updates, optional and recommended through Microsoft Update after that

    Machine Vista 2 has Vista Ultimate x 86 SP2 installed and has been implemented in the following way:

    • Installed Vista Ultimate SP1 from DVD
    • Apply all updates important, recommended, and optional through Microsoft Update
    • All the different ways to install SP2 and had no success in which I used the followed by the fix corrupt system analysis tool Pack of language without problems were detected but had to reinstall OS in order to reactivate Windows new
    • Reinstalled Vista Ultimate SP1 DVD
    • Installed SP2 with download of the Microsoft not by Microsoft Update website and this time it worked
    • Apply all updates important, recommended, and optional through Microsoft Update

    I searched on Google for months on how to solve the problems highlighted in the CBS logs but got too hypnotized and decided to consult you on how to solve the problems. I forgot to mention also that 11 updates of Windows would not apply via Microsoft Update on both machines and apply them manually in which they worked.

    Finally please can you give me a link to download CBS logs.

    Your help would be much appreciated.

    Thank you very much

    RocknRollTim

    https://social.technet.Microsoft.com/forums/Windows/en-us/54bff6db-0797-4655-A331-a86510c1b291/Vista-CBS-log-issues?Forum=itprovistasp and OneDrive (SkyDrive) for download to use collected files and after shot/screenshot. (Updated: 16/01/2012)

  • I updated my drivers and now my computer runs very slowly. How to solve the problem?

    I've recently updated my Intel graphics driver and my drivers Nvidia because they were terribly outdated. As a result, I am able to run some games that I couldn't run before, but my computer became very slow. Now, the startup time is significantly slower, and the worst part is that the actual performance of the system is slower. I checked in the Task Manager, and my physical memory constantly rotates between 40 and 60% (I have 8 GB of RAM, Windows 7) without any game or program being open, except the web browser and Skype.

    What is perhaps the reason for this problem? Is certainly the problem in the drivers? How to solve the problem?

    "My graphics card is GEFORCE GTX 660 M. Is it compatible with the latest driver? »

    Ah! A laptop computer. With laptops, it is generally better to download the driver from the mfg, not Nvidia.

    This is because the computer laptop mfg bring changes that can make the improper generic Nvidia driver.

    and while I always count should not slow down the system... You never know.

    "What services I need to run.


    Just to keep the correct terminology-

    Services is the area where you stopped the service of bitlocker.

    The start is where you keep things from loading when you start in Windows.

    -Most of the time what's in Startup deactivation is something personal need, but there are some things that

    I must be on the left.

    I leave the Intel common user interfaceand Installshield update service, mainly because I don't bother

    Discover what they are doing.

    I also let anti-virus, Realtek audio, software profile keyboard and a few other things active.

    I don't have Adobe Flash loading with Windows, but I don't use it a lot, and when I do the software that

    uses it it launches automatically.

    The bottom line here is that if you have software that you use all the time, it is more convenient to have it start with

    Windows.

    -Concerning the Services. This also has to do with personal preferences to a certain extent, but most things can be left alone.

    I do not use the Services tab in the Configuration of the system, because I think it's only a one time adjustment.

    (Clean boot, linked earlier, is the best tool for the verification of conflicts with Services)

    To stop or disable a Service manually, tap - services.msc - in the run command to open

    the main window of Services.

    There is an Adobe Flash update in Services that should be kept, but when Adobe makes an update

    I select the option notify me, but not to install it automatically.

    I always preferred this with any updates, including Windows updates as there is less chance of a corrupt

    Update If you're aware, it happens and do not do something intensive system while the update is being installed, particularly when an update requires a restart to complete.

    -Registry. In the control run, type - regedit - and browse the registry with the file path in the

    previous post and follow the instructions. You can save the key you are modify if you wish, that the use of the

    backup to change the value to what is current would be faster than navigating to the key again.

    -When playing around with things you are not familiar with creating a System Restore point before you

    making these changes is a good insurance policy.

    If you don't know how to create a system restore point - time to do some research.

    In fact, all of the above is covered by tons of tutorials out there in the www.

    SSD vs HDD - the specifications of the system for you the machine should be in your user manual or on the

    MFG web site.

    Prefetch is useful with HARD drive, because it improves performance somewhat, but read-ahead is not really necessary with SSD.

    and can reduce the life expectancy SSD a bit (there is debate on gravity)

    More research for more details. D

    -If you use a HARD disk and that you have enabled Prefetch, the Prefetch will be rebuilt over time, if you delete the files.

    -Here's another tip for when you are not sure of the impact of deleting files.

    Rename file/folder. You can do something like add another couple of P to the front, or a 1a which will move

    the file to the top of the window. If nothing is wrong in the next few days, you can delete the folder.

    This method protects to empty the trash accidentally and lose the file/folder.

    -Speaking of deleting the file. A great TEMP folder can slow things way down.

    Run Windows, Disk Cleanup . This will remove many files in the Temp folder.

    Or, for a full, clean, go to the - your User\AppData\Local\Temp

    Open the Temp folder and delete anything that can be deleted (impossible to delete the files that are used).

    -Defragment your HARD drive

    -Run the Zig - zag Kit you'd use again and analyze the results.

    It was a long, huh!

    .

  • I can't upload an image under license. I always get the image in low resolution. How to solve the problem?

    I can't upload an image under license. I always get the image in low resolution. How to solve the problem?

    Follow these steps to download or save in the library: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

  • Anyone know how to solve the problem, when he says scratch disk is full?

    Anyone know how to solve the problem, when he says scratch disk is full? don't do anything :/

    Go to Edition > purge > all

    This will clear all of your history and Clipboard, thus freeing the scratch disk space.

  • How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

    How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

    It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

    Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

  • What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data?

    What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data? I'm incorporating data of the bar code under a button field. But when the data is large, the problem occurs.

    Apparently the theoretical capacity of the PDF417 barcode is 1850 characters or numbers in 2710. Of course, the actual capacity depends on the size - more square inches, more data. But before the theoretical limit, that you can reach practical limits in scanning technology so test carefully with all models of planned barcode scanner.

  • How to solve the problem of 'ASM disk group is inaccessible' slave VM rac2?

    People,

    Hello. I want to install Oracle 11 g RAC 2 using 2 virtual machines (VM main rac1 and rac2 VM slave) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html

    Grid and data base RAC have been installed successfully for VMS rac1 and rac2.
    I use the slave rac2 VM test data grid and CARS because rac1 disk is full.
    The problem is that the OCR file is not available or currupted in the rac2 VM slave. To know his reasons, I check permission on disc ocr as below:

    [ora11g@rac2 bin] $ pwd
    / U02/11g_db/ora11g/racdb/bin

    [ora11g@rac2 bin] $ srvctl start asm

    RPRC-1070: could not verify if the ora.asm resource is registered
    Cannot communicate with crsd

    [ora11g@rac2 rac2] $ pwd
    / u01/app/Grid/log/Rac2

    [ora11g@rac2 rac2] $ cat alertrac2.log

    Last lines:
    [/ u01/app/grid/bin/cssdagent (5779)] CRS - 5822:Agent ' / u01/app/grid/bin/cssdagent_root "disconnected from the server. Details at (: CRSAGF00117 :) in u01/app/grid/log/rac2/agent/ohasd/oracssdagent_root/oracssdagent_root.log.)
    2012-03-20 13:44:55.914
    [ohasd (5149)] CRS-2112: the service ODE started on node rac2.
    2012-03-20 13:44:58.588
    [ohasd (5149)] CRS - 8017:location: / etc/oracle/lastgasp has 72 Advisory reboot log files, 0 were announced and 0 errors
    2012-03-20 13:45:07.555
    [ohasd (5149)] CRS - 2772:Server "rac2" was awarded to 'Free' the pool.
    2012-03-20 13:45:10.108
    [ohasd (5149)] CRS-2302: failed to get profile negotiators. Error CLSGPNP_NO_DAEMON (the demon GPNPD does not work).
    2012-03-20 13:45:10.251
    [gpnpd (5368)] CRS - 2328:GPNPD began the rac2 node.
    2012-03-20 13:45:13.037
    [cssd (5443)] CRS - 1713:CSSD daemon is launched in cluster mode
    2012-03-20 13:45:37.132
    [cssd (5443)] CRS - 1707:Lease acquisition for node rac2 number 2 completed
    2012-03-20 13:45:37.727
    [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK3; details in u01/app/grid/log/rac2/cssd/ocssd.log.
    2012-03-20 13:45:37.986
    [cssd (5443)] CRS - 1625:Node rac1, number 1, was closed manually
    2012-03-20 13:45:37.991
    [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK2; details in u01/app/grid/log/rac2/cssd/ocssd.log.
    2012-03-20 13:45:38.633
    [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK1; details in u01/app/grid/log/rac2/cssd/ocssd.log.
    2012-03-20 13:45:56.956
    [cssd (5443)] CRS - 1601:CSSD Reconfiguration is complete. Active nodes are rac2.
    2012-03-20 13:46:00.557
    [ctssd (5834)] CRS-2403: the time synchronization Service on rac2 host Cluster is in observer mode.
    2012-03-20 13:46:00.576
    [ctssd (5834)] CRS-2407: the new Cluster Time Synchronization Service reference node is host rac2.
    2012-03-20 13:46:01.000
    [ctssd (5834)] CRS-2401: time synchronization Service Cluster started on host rac2.
    2012-03-20 13:46:11.097
    [crsd (5856)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:12.085
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:13.338
    [crsd (5925)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:14.217
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:15.438
    [crsd (5940)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:16.313
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:17.539
    [crsd (5955)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:18.392
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:19.537
    [crsd (5988)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:20.468
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:22.636
    [crsd (6003)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:23.615
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:24.781
    [crsd (6022)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:25.713
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:26.885
    [crsd (6037)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:27.799
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:29.021
    [crsd (6052)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:29.925
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:31.136
    [crsd (6067)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:32.040
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:33.247
    [crsd (6082)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
    2012-03-20 13:46:34.172
    [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
    2012-03-20 13:46:34.173
    [ohasd (5149)] CRS - 2771:Maximum attempts to restart the resource 'ora.crsd '; does not restart.
    [ora11g@rac2 rac2] $

    The output of alertrac2.log, we have seen disk group ASM is inaccessible. So my question is:

    How to solve the problem of "ASM disk group is inaccessible" in the rac2 VM slave?


    Thank you.

    user8860348 wrote:
    People,

    Hello. Thanks much for the reply.

    Yes. I put the entry "SQLNET. AUTHENTICATION_SERVICES = (NTS)"input file sqlnet.ora.

    I ran the commands below:

    [ora11g@rac2 bin] $ pwd
    / u01/app/Grid/bin

    [ora11g@rac2 bin] $ ps - ef | grep pmon

    16219 ora11g 8602-0 12:29 pts/2 00:00:00 grep pmon

    [ora11g@rac2 bin] $

    [ora11g@rac2 bin] $ export ORACLE_SID = + ASM2
    [ora11g@rac2 bin] $. / sqlplus / as sysdba

    SQL * more: Production version 11.2.0.1.0 Fri Mar 23 12:33:15 2012

    Copyright (c) 1982, 2009, Oracle. All rights reserved.

    Connect to an instance is idle.

    SQL > startup pfile = ' / u01/app/grid/dbs/pfile ".
    ORA-01031: insufficient privileges
    SQL >

    Sign in as SYSASM as

    . / sqlplus / as sysasm
    >

    As we see above shows the command $ ps - ef | grep pmon, my question is:

    First of all, are ' 16219 8602 ora11g 0 "process ID?

    Secondly, we need to kill one by one? For examples: kill-9 ora11g? Kill-9 16219?

    Laughing out loud. It's not the running process.

  • How to solve the problem of Oracle SQL Developer Connection?

    People,

    Hello. I use the Oracle 11 GR 1 material database. The database https://localhost.localdomain:1158 control console / em works correctly. I can create a database and a table with success.

    My OS is Linux and connects to the internet successfully.

    In order to execute SQL statements. We use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:

    Connection name: DB1 (is my database name)
    User name: SYS (this is the user name I used to connect to the Console)
    Password: SYS (this is the password used to connect to the Console)
    Connection type: basic
    Host name: localhost
    Port: 1158
    SID: DB1 (it is created during the installation of the database)

    But the error message: "status: failed - IO exception Connection Reset."

    Can any folk tell me how to solve the problem of Oracle SQL Developer Connection?

    user8860348 wrote:
    People,

    Hello. I use the Oracle 11 GR 1 material database. database Control Panel https://localhost.localdomain:1158 / em works correctly. I can create a database and a table with success.

    My OS is Linux and connects to the internet successfully.

    In order to execute SQL statements. We use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:

    Connection name: DB1 (is my database name)
    User name: SYS (this is the user name I used to connect to the Console)
    Password: SYS (this is the password used to connect to the Console)
    Connection type: basic
    Host name: localhost
    Port: 1158
    SID: DB1 (it is created during the installation of the database)

    But the error message: "status: failed - IO exception Connection Reset."

    Can any folk tell me how to solve the problem of Oracle SQL Developer Connection?

    user name: sys
    password: enter_your_correct_password given at the time of the installation of oracle

    role: select sysdba if you would connect as sysdba otherwise select normal for users other than the sys

    HostName: Enter your ip or hostname of the oracle example server address:-192.168.11.12

    to find the terminal/command prompt open hostname in oracle installed machine
    type---> hostname

    type ping hostname--->

    You can find the IP address of the server

    Port number: 1521 (default)---> I guess, otherwise check the port number in the file tnsnames.ora under your ORACLE_HOME/network/admin folder

    SID: DB1

    try it
    Good luck

Maybe you are looking for

  • How can I convert an old word AppleWorks document?

    Hello We have a Mac Mini end of 2014 and have attached an old drive to a PowerMac 2002 and discovered that we have important documents that were created with AppleWorks 6.2.9 that we have been missing.  Is there any tool that will open these document

  • the running program on myRIO with access to controls via wifi

    I built balancing robot using myRIO. It does not perform very well and I can control it via wifi. I have now the Setup is simple enough: I can control and set PID and Kalman (accelerometer gyroscope) values. However, there are significant delays asso

  • Change a disk 8 GB to FAT16 flash and starting it

    Hello. I have a 8 GB Flash Drive and I want to change it for a with FAT16 2 GB flash drive (I know how to do this) AND boot from it. I tried to use the FORMAT + DISKPART. EXE, then I copied the files to boot, but he said: Remove disks or other bootab

  • MSMSGS. EXE process

    What is the process MSMSGS. EXE and is it dangerous?

  • Uninstall/reinstall the driver Photosmart 9520

    My printer is a Photosmart 7520, I've had for almost a year. My computer is Windows 7 and is connected to the printer through a USB cable. Another computer running XP and is connected wireless. Previously, I posted a problem that has not been set. I