can get video but no audio from certain sites like You Tube. Picture is playing but no sound. All ideas

Similar Questions

• Recently, when I run a game CD I get video but no sound.

  original title: No audio on game CD
  Recently, when I run a game CD I get video but no sound. I tried all the obvious difficulties as re - install the game, reinstall direct X and nothing made a difference. I can play CDs of music very well. I cleaned my hard drive also and checked all the relevant drivers - everything seems to be "working properly" except that I can't get audio to play. Strange...

  You can try to use system restore to revert while it worked.
  http://support.Microsoft.com/kb/306084

  Also make sure that you have the patch 1.02 installed for the game.

• When I try to play a DVD, I get video but no sound.

  I HAVE WINDOWS XP SP3, I RECENTLY USED FIX IT IS A FUNCTION OF MEDIA PLAYER TO DETECT ANY PROBLEM. HE POINTED OUT THAT MY DVD DRIVE IS NOT DETECTED BY MEDIA PLAYER, EVEN IF IT IS LISTED IN THE DEVICE MANAGER AND WORK FINE ON OTHER MEDIA PLAYERS. I TRIED TO PLAY A DVD MOVIE BUT I COULD ONLY SEE THE VIDEO AND HAD NO AUDIO, THE DVD EVEN WHEN I PLAYED IN VLC WORKED WITH AUDIO-VIDEO BOTH. WHAT IS THE PROBLEM? Help?

  original title: MICROSOFT DIFFICULTY IT REPORTS DVD PLAYER NOT DETECTED BY MEDIA PLAYER

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  In Windows Media Player.

  a. click on Tools and select Options.

  b. click on devices and click on DVD , then select Properties.

  c. make sure that playback and Rip are set to digital.

  Method 2:

  I also suggest you check out the link and try to update the Codecs on the computer:

  Package of Installation of codec

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=507

  See also:

  Player Windows Media for Windows XP supported Codecs

  http://support.Microsoft.com/kb/291948

• I can't run videos on websites like you tube using a macbook pro after installing firefox 3.6.15

  I have a macbook pro. Firefox has performed well for years, but after downloading firefox 3.6.15 I can't run all videos from web sites like you tube or Itunes.

  Loading the web page, but the video window does not show at the top, nor all the controls

  When I tried to run a trailer since Itunes sound was there but not the video.

  My pluins are up-to-date.

  I had the same problem and it seems that Adobe Flash Player 10.2 is the culprit. Back this version and everything seems to work properly again.

• I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me

  I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me?

  Hello joebat,

  It seems that some of your plugins (Shockwave Flash 10.1 r102) might be buggy or obsolete. To check for updates, please visit the plugincheck page. If this does not resolve the problem, try to start Firefox with the disabled modules and see if it helps at all. If so, delete the Shockwave Flash plugin and maybe reinstall or uninstall Firefox and do a new clean install.
  If that is not yet solved the problem, try the following troubleshooting steps: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  Thank you for your patience and please let me know how it goes.

• ezcap usb 2.0 video capture video but no sound error code 10

  ezcap usb 2.0 capture video like the video but no sound, it says error code 10

  the driver is downloaded I use Windows 7 64-bit, he worked on another computer
  Thank you
  Chris829

  Hi Chris829,

  Where did you download the drivers from?

  Method 1:

  Run the hardware and peripheral troubleshooting tool and driver updates by using windows update.

  Open the hardware and devices Troubleshooter

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  Method 2:

  You can try to uninstall and reinstall the driver and check if it helps:

  Step 1:

  Uninstall the drivers from Device Manager.

  a. click Start, type Device Manager in start search box and press enter.

  b. Locate the device, right click on the device and select uninstall.

  c. restart the computer and check if that helps.

  Step 2:

  You can also check the manufacturer's Web site and try to install drivers Windows 7 64 bits for the device and check if it helps:

  Update drivers: recommended links

  You can also consult the support Ezcap link and check if it helps:

  http://www.ezcap.TV/index.php?Main_Page=index&cPath=71

• My hosts file has been corrupted, while I can't access certain sites like youtube or google etc, how do I replace a new hosts file?

  My hosts file has been corrupted, while I can't access certain sites like youtube or google etc, how do I replace a new hosts file?

  Hello

  The Hosts file and that it can do for you
  http://www.bleepingcomputer.com/tutorials/Tutorial51.html

  How to reset the default hosts file? -Mr Fixit methods and manual
  http://support.Microsoft.com/default.aspx/KB/972034

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• the phone rings, but no sound all by playing music

  just the sound of the Bell, but no sound all by playing music

  These articles may help:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  BTW, you can hear the music with headphones?

• The ITV player / You Tube keeps in memory buffer and sound cut since I have done a Windows Update. How can I fix?

  I did a Windows Update on my XP

  The ITV player / You Tube keeps in memory buffer and sound cut since I have done a Windows Update. How can I fix?

  What is the speed of internet connection?

  http://www.Speedtest.NET/

  Don't make sure that no firewall or internet security thing trying to block streaming.

  Install the latest version of Adobe Flash Player: -.

  http://get.Adobe.com/flashplayer/

• videos transferred from mobile phone to the computer, have video but no sound

  I transferred the videos on my mobile phone to my computer via my CD san, I have great videos but absolutely no noise... and yet I have all other sounds on my computer and videos work very well on my cell phone...

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question.

  1. What is the file format of the files that you transferred?

  2 have you ever try to play videos on a different drive?

  3 you meet problems during playback of video files in Windows Media Player?

  4. do you have the codecs installed on the computer?

  A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  A codec can consist of two components: an encoder and a decoder. The encoder performs the compression function (coding) and the decoder performs the decompression function (decoding).

  Some codecs include both components and some codecs only one of them.

  For example, when you rip a song from an audio CD on your computer, the player uses the default Windows Media Audio codec to compress the song into a compact WMA file. When you play that WMA file (or any WMA file that may be broadcast from a Web site), the player uses the codec Windows Media Audio to decompress the file for music can be played through your speakers.

  More Codec please visit the following link:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  You can search your favorite engine and download and install the codec that is compatible with the operating system.

  Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information helps. Please reply with the status so that we can help you.

• Anyway I can get for free a Cie from my pc crapped out vista basic and I need to reinstall.

  I bought an acer 5315 laptop computer series with windows Vista Home Basic. I have my key ode on the bottom for her. I need to reinstall Vista Home Basic Edition, but have no disc for her. AY idea how I can get it without having to buy new?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  http://us-store.Acer.com/RCD/

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  With an Acer, it's Alt + F10

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  See programs > name Acer > then their eRecovery software topics on how to do, how it is made in function.

  If you find a reference to it, contact Acer to get tips on how to do these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• 2 wireless routers, I can get out, but not in

  I was hoping you might be able to help me with my setup, I've almost got it, there's just something that I'm missing.  I had a wireless router G (WRT54G) running well in my network for a while now, and since my wife and I both just 802.11n capable laptop, I thought I would update and buy an N capable router (WRT320N.)

  I want to dedicate the N Router for laptop computers and to use for our computers/server down wired gigabit ports.  I still have some G-only devices (PS3, Xbox, iPhone, older laptops) I want to connect to the old G router.  I also use my PS3 as a DLNA server so want to be able to join the server wired on the N Router for the PS3 wireless network g. (I'll just use a router N and G later, you know what I mean )

  So, I pulled the G router out of the network.  Configured the router as DHCP N, with an internal address of 10.1.1.1 and plugged into the WAN port on my modem.  Plugged the router G into my phone and statically configured the external interface as 10.1.1.254, and inside the interface as 192.168.1.1 and plugged his WAN port in one of the ports on the router N 'LAN '. (I left the internal addresses on the router G DHCP to 192.168.1.x, since I was a few static addresses on the G network)

  Return to the N router, I went in routing advanced and added an entry for 192.168.1.0 255.255.255.0 Gateway 10.1.1.254 for 'LAN and Wireless.

  So far so good.

  I can connect to G and N networks just fine and can go out to the net with both of them.  I can get the network from the N G very well.  When I'm in trouble becomes the network N to G.

  I returned to the G router and turned off all security settings (Block anonymous Internet, Multi filter, filter Internet NAT) but just can't see what I'm doing wrong.

  I can't even ping the router 192.168.1.1.

  Of course, I would be grateful for any help or suggestion!

  Thank you

  Dan

  Try to set the router G 'Router' mode, rather than in "Gateway" mode

• I can log my wordpress site or rather I can get into the back part of my site, but I can see no longer the button edit on Firefox

  I use firefox 24 and it was working fine until the weekend last upward, then I could see is no longer the button edit on my wordpress site.

  The thing is that I can get my site through the url of site-wp-admin as cookies allow me to do it, but once I click on visit the site so I can't do anything because there is no edit button and not a connect button not more so I do not have the possibility of trying and failing, or succeed.

  It is curious, as it happened recently.

  Now, I have to use chrome to do all my editing because there is no problem on this browser

  If you connect to your admin pages by using a secure connection (HTTPS url), check the address bar to a notification icon "shield". This article explains what are it know if you find a: joint in Firefox content blocking

• When I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic) nothing happened.how can get video off camera and on the computer?

  (In the AutoPlay dialog box that appears when you turn on the DV camera, click importing video.)
  It's # 2 on how to import the video but when I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic), nothing is happening... How to get my video on my computer and my video cam?... I also got told by sony I needed to cap analog, so I have I need to download something on internet even thought I have Director on my windows? IM so confused?

  Hi harleykristi,

  Welcome to the Microsoft answers site!

  Looks like the video camera (Sony trv608) is not compatible with windows vista, see the Sony link below:

  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=1452&MDL=CCDTRV608

  () Vista drivers are not available)

  You try to install the software that came with the device in windows XP service pack 2 compatibility mode. See the link below:

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.

  2. follow the directions in the wizard.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  For more information, see the link below:

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=CCDTRV608&loc=3

  You the best solution would be to check with Sony to learn more.

  http://eSupport.Sony.com/us/Perl/contact-land.pl?MDL=CCDTRV608

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to selectively keep cookies from certain sites. IE can do this, can Firefox?

  Some sites have new validation procedures where they display an image on the page connect. Sometimes, the image is stored as a cookie on the particular computer (Yahoo for this). I have my security settings to delete all cookies off then the registered security cookie is deleted. I mean selectively Firefox not delete this cookie, but still delete all others. Is this possible?

  • Allow all cookies expire when you close Firefox.
  • Tools > Options > privacy > Cookies: "Keep until the": "closing of Firefox".
  • To allow an exception for those you want to keep.
  • Tools > Options > privacy > Cookies: "Exceptions."

  You can review and change the permissions for the domain in the active tab in "tools > Page Info > Permissions.

  Make sure that you do not remove the navigation, search and download history on Firefox to clear 'Cookies' and "Site preferences" (Site preferences includes cookie exceptions)

  Deletion of cookies will delete all specified (selected) cookies, including cookies that have an exception permit.