When I try to play a DVD, I get video but no sound.
I HAVE WINDOWS XP SP3, I RECENTLY USED FIX IT IS A FUNCTION OF MEDIA PLAYER TO DETECT ANY PROBLEM. HE POINTED OUT THAT MY DVD DRIVE IS NOT DETECTED BY MEDIA PLAYER, EVEN IF IT IS LISTED IN THE DEVICE MANAGER AND WORK FINE ON OTHER MEDIA PLAYERS. I TRIED TO PLAY A DVD MOVIE BUT I COULD ONLY SEE THE VIDEO AND HAD NO AUDIO, THE DVD EVEN WHEN I PLAYED IN VLC WORKED WITH AUDIO-VIDEO BOTH. WHAT IS THE PROBLEM? Help?
Hello
Were there any changes made on the computer before the show?
Method 1:
In Windows Media Player.
a. click on Tools and select Options.
b. click on devices and click on DVD , then select Properties.
c. make sure that playback and Rip are set to digital.
Method 2:
I also suggest you check out the link and try to update the Codecs on the computer:
Package of Installation of codec
http://www.Microsoft.com/en-US/Download/details.aspx?ID=507
See also:
Player Windows Media for Windows XP supported Codecs
http://support.Microsoft.com/kb/291948
Tags: Windows
Similar Questions
-
When I try to play a DVD I get the following error: C00D1163 indicating a digital license incompatibility. How can I fix it?
Hi ratdogmw,
1. what kind of file contains the DVD?
2. If it works well before? If so, then remember to make changes to the computer, after which the issue started?
I suggest you to take a look at the following article link and check if it helps:
Windows Media Player Error Message help
I hope this helps.
-
Loud noise clicking noise when you try to play a DVD
HP Pavilion d4995t desktop PC with High Definition Realteck Audio Ultimate. Vista Premium o/s. I play my sound through my HDMI cable to the speakers in my monitor. When I try to play a DVD in the DVD player, I get a loud clicking with no sound from the DVD. This only happens to the DVD. CDs play sounds without problem. If I copy the same files to DVD on the hard drive, I can play from the hard drive and the sound works. If I connect speakers to the audio output and disable the HDMI output, I can play the DVD in the DVD player and games sound through the speakers without noise. I ran his tool from Microsoft without success. Updated all the audio drivers. I reloaded Vista, which corrected the problem. But as time passed the problem comes back. I suspect that the problem was caused by a Microsoft Update. Someone at - it suggestions?
Hello
Yes, sometimes after installing the Service Pack for Vista through Windows Update.
Click on start-> "Control Panel-> sounds-> reading-> select Realtek HDMI Output, click Properties. Click on the Advanced tab above, -
When I try to play a DVD through Windows Live Photo Gallery, I get an Ox80010108 error code
Original title: compatibility programs Application Applications App Apps game games Legacy Crash crashes Hang hangs
When I try to play a dvd through Windows live photo gallery, I get an Ox80010108 error code. What does that mean.
Hi DonWright,Follow the steps as shown in the link given below and check if it helps to fix the problem:If this does not help, post your request in the Photo Gallery Forums for assistance on this issue. -
nothing happens when I try to play a dvd
I have a refurbished HP Pavilion Entertainment PC, dv6448se, with Windows 7 above. I just want to play a DVD, but the computer has no effect when the dvd
is inserted in the drive. The quick game on the computer nothing buttons do. It says I have Windows Media Center/player, but I'm not, and it doesn't show up when I try to play a dvd. Its not listed in the AutoPlay options either. What should I do?
I have a refurbished HP Pavilion Entertainment PC, dv6448se, with Windows 7 above. I just want to play a DVD, but the computer has no effect when the dvd
is inserted in the drive. The quick game on the computer nothing buttons do. It says I have Windows Media Center/player, but I'm not, and it doesn't show up when I try to play a dvd. Its not listed in the AutoPlay options either. What should I do?
=========================================
If you happen be running Windows 7 Starter Edition or Basic...
a DVD decoder is not included.As you can see in the following article... MS recommends
upgrade to Windows 7 Home Premium, Ultimate or business.Info about DVD decoders: Plug-ins for Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-insAnd... maybe the following articles provide some ideas:
Windows 7 - read a CD or a DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-PlayerWindows 7 - compare editions of Windows 7
http://Windows.Microsoft.com/en-us/Windows7/products/compareStill no luck?
One of the following freeware media readers can
be worth a try... they'll play anything.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7)
(the name of the file to download is: vlc - 2.0.3 - win32.exe)(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Media Player Classic Home Cinema
http://www.videohelp.com/tools/Media-Player-Classic-home-cinema
(works on XP/Vista/7) (The name of the file to download is:)
"mplayerc_homecinema.1.6.3.5818.x86.exe")
(start with left click - Download (direct link)Good luck...
-
Error message when you try to play the DVD
I get the following error message when you try to play the DVD:
"Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.
My OS is Windows seven, and I don't see any video updates on the HP Support site. Help!
Downloaded the codec?
-
I don't know if I am posting this in the right place. If she must be somewhere else please let me know.
When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »
I use Windows 10 and iTunes version 12.3.1.
It's the path statement where the music is currently located on my hard drive:
If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.
To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.
Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.
Thank you!
Now iCloud is down, if something happens on the end of apples.
-
* Original title: Windows Media PLayer
I have Windows Media Player version 12 installed but when you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the picture. Please see image attached.
Even if I see that I can change the version of the file in a different format, I have the same problem with videos on websites that I can not of course change the format before playing these.
I managed to fix the problem for about 20 minutes by flattening my computer re - install the operating system and this resolved until all updates have been through, and then it disappeared again. I tried many codecs packs and this still does not help.
My system is running Windows 7 and Media Player version is 12.0.7601.18840, which tells me that Media Player is the most recent version.
Please can someone help?
Open uninstall a program in windows and in the left click on the feature to turn on or off windows. Clear the check box of the window Media Player, and then click ok. This will uninstall the drive, and then restart.
After restarting the same steps, now, check the box for the same and perform a restart and if all goes well it should solve the problem.
Note: Make sure that Windows is up-to-date.
-
When you try to play a DVD in Windows Media Center or media player, the video starts, but there is a loud cracking sound with no sound of music. This Media Center has played the DVD in the past.
My system is: Vista Home Premium
NVIDIA GeForce 8500
Hauppauge Win TV HVR-1600
Realteck HD audio
ViXS Pure TV - U 48BO
I checked these devices using HP Hardware Diagnostic tools and they work. I uninstalled the drivers and reinstalled. Also updated all the drivers.Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player
So far, nothing has solved the problem.
Thank you for your response.
I went through the steps. He has not fixed the problem. The good news is that I stumbled upon a fix. I've uninstalled and reinstalled the Realtek Audio drivers. Which corrects the problem.
Thank you.
-
Recently, when I run a game CD I get video but no sound.
original title: No audio on game CD
Recently, when I run a game CD I get video but no sound. I tried all the obvious difficulties as re - install the game, reinstall direct X and nothing made a difference. I can play CDs of music very well. I cleaned my hard drive also and checked all the relevant drivers - everything seems to be "working properly" except that I can't get audio to play. Strange...You can try to use system restore to revert while it worked.
http://support.Microsoft.com/kb/306084Also make sure that you have the patch 1.02 installed for the game.
-
Original title: Media impossible Center of opn mesenger
I have the DVD that I can play on non-microsoft program.
When I try to play on Medis Centre I get a message;
Cannot open messenger media center units
Can you direct me. Shel
See this previous discussion: http://answers.microsoft.com/en-us/windows/forum/windows_xp-tv/media-center-failure-messages/3962030b-76c3-4e51-a078-26322e702c06 (26 June 2010)
Related...
Windows Messenger in Windows Media Center error
http://mymce.WordPress.com/2008/08/20/Windows-Messenger-error-in-Windows-Media-Center/Error Windows Messenger in Media Center Edition 2005
http://blog.jasontsang.ca/2008/08/Windows-Messenger-error-in-Media-Center.html -
Windows Media Player help
I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error. I can't find a solution. Any Advisor. Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.
Hi Rains27,1. were you able to play the same DVD sooner?
2. must arrive with a particular DVD or all of them?
3. do you have a DVD decoder installed on your computer?4. you use starter edition of windows 7?5. What is the resolution on your computer?6. have you installed a codec on your computer?If you have installed a codec on your computer the I suggest you to uninstall the codec.
Method 1:
Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
Troubleshooting, click View all, and then click Windows Media Player DVD.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
Method 2:
Play a cd or DVD in windows Media player
http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
Method 3:
Try to reduce the hardware acceleration again and check if it makes a difference.
a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
b. click on advanced settings, troubleshoot tab and then click on change settings.
c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
d. click OK and then click Restart now.For more information, see this link: thanks and regards:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
No Media Player - codec errors when you try to play a DVD
Media Player will not play the DVD. It is a DVD. It keeps saying that I need to lower the resolution? Really, this cannot be more obtuse. In addition, please do not answer with the codec information, because these are TS DVD standard, not divx, avi files, etc.. If you do not know the difference, please answer. I doubt you can answer the question, but let ' see
Hello
- What is the exact error message that the OP is.
- Can you play the discs or videos using media even
Method 1: Let's run the game and DVD Burning, convenience store and check if the problem persists.
(a) click on start and then Control Panel.
(b) in the search box, type troubleshooting, and then click Troubleshooting.
(c) click View all, and then click on reading and burning CDs, DVDs and Blu - ray disc and follow the instructions.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
Method 2: Try to reduce hardware acceleration.
(a) screen resolution open by clicking the Start button, tap Control Panel configuration, and then, under appearance and personalization, click on adjust the screen resolution.
(b) click Advancedsettings, the Troubleshooting tab, and then click on change settings.
(c) move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.
(d) click OK, and then click Restart now
Reference:
Windows Media Player Error Message help
It may be useful
-
copy a group of photos w/music (Smilebox program) on dvd;
After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. We live in the Washington area. I didn't know that DC was considered an unusual geographic region?
Hey nongeekbetty,
The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.
Step 1:
Make sure that the DVD region is set to the appropriate region:
a. Click Start.
(b) in the search box, type Device Manager.
c. right-click on the DVD drive.
d. right-click on it and select Properties.
e. make sure that the region will be resolved.
For your information:
Step 2:
Also temporarily disable User Account Control (UAC) and check it out.
http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off
Note: Activate it once you are done with the check.
Kind regards
Savan - Microsoft technical support.
-
I bought a DVD called "The Secret" and I can't play.
And I get this messageWindows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.Hello
Thanks for asking!
1. have there been recent changes to the system before the show?
2 is confined to a specific DVD?
3. What is the file format of the DVD?
Method 1:
Follow the link and follow the steps. Check if it helps.
Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection
http://support.Microsoft.com/kb/2004673
Method 2:
Follow the link and update drivers display, check if it helps.
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Answer with the results, I'd be happy to help you best.
Maybe you are looking for
-
How to transfer phone contacts from my Huawei phone to my iPhone 5 s
How to transfer contacts from my phone android from Huawei to my new iPhone 5 s?
-
Hi, my winplayer get massage: has encountered a problem during playback of files
1 HP Pavilion dm4 2 Win 7 Ultimate 64-bit 3 Win medialpayer give me the massage when set to read a file: Windows Media Player has encountered a problem while playing the file. 4. install a new Netgear N600 router. But my main pc HP Slimline does not
-
License of R2 Hyper - V Windows server 2012
Hello I am an administrator of a small business network and we are currently planning to virtualize our four servers on two ML350 servers. We have three licenses of 2012r2 (think that's standard lisences). Before we decide to do what I have to know h
-
What is M.S. NET 4 and what is its role?
What is net 4 and what is its role?
-
List box width of path not taken into account
What's new in Ultiboard 10.1: I noticed that you cannot select a width value in the Trace Properties dialog box using only the drop-down list box. For example, I have a net that was set manually to 1 mm. If I want to choose 'Use Net settings' instead