Can I add an external HARD disk drive to my Satellite L300-110?

How can I add an external HARD drive to my Toshiba Satellite L300-110 portable and not Toshiba supports adding such a type of HARD drives for laptops?

Hello

Drive external DRIVE can be connected to any PC or laptop. Drive external DRIVE is connected to the USB ports. On this photo you can see what it looks like.

Tags: Toshiba

Similar Questions

  • Can not change the external hard disk drive letter.

    When I (R) click on the drive that I want to change the box that appears is all grayed out and you can just click on the help line. How can I change this so that I have all the choices available in the box? While I can click on change drive letter.

    When I (R) click on the drive that I want to change the box that appears is all grayed out and you can just click on the help line. How can I change this so that I have all the choices available in the box? While I can click on change drive letter.

    seems apparent question is already answered here... Follow the troubleshooting steps

    http://www.SevenForums.com/general-discussion/39481-cant-change-hard-drive-letter-needed-letter.html

  • Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

    Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

    Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

    The DVD player worked before HARD drive went bad now, it won't work.

    And I just replaced the HARD drive, but now cannot load an operating system that he...

    Help, please...

    Hi dynamitenews

     

    1. are you able to boot to the desktop?
    2. what happens when you try to start the computer?

     

    You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

    Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
    http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

    If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.

    BIOS WARNING-
    Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

     

    I hope this helps.

  • I need the driver for my external HARD disk drive

    Hi how are you?

    Well, I would like to know I do an external drive using the portable hard drive whose name is "Toshiba MK8034GSX" which is with a capacity of 80 GB.
    A few days back I plugged to the USB port with my pc but after that it says need driver and I n t have the HARD disk driver.

    So kindly if anyone has the driver or know the link where I can find the driver then tell me I will be very grateful to you all.

    With regard to:

    Martine André

    Hello

    What is a USB HDD?
    You n t need any driver, and there is no drivers for an external USB HDD.

    The USB driver is part of the Windows OS and it s already installed.
    The USB HDD must be fitted with a plug & play device which means that should be recognized automatically after you connect to the laptop USB port.

    What OS you have and what laptop is it?
    The operating system is up to date?
    USB ports are correctly listed in the Device Manager?

  • OS can not find Gigastore external HARD disk.

    Hello
    I have a problem with my new Gigastore external HARD drive.
    I have a windows 2000 and the operating system can not find the Gigastore external HARD disk.
    One of the systemrequires is that it is compatible with Windows 2000.

    Thank you for your help.

    Sincerely
    Luis

    You don't give much info.
    I would first go in "Device Manager" and check that there is not a question mark with "unknown device" beside him. If this is the case, highlight it and delete it, unplug your HARD drive and restart your computer. Check the Device Manager again, you will need to repeat the process without the connected HARD drive. Then follow the instructions of the manufacturer install the driver. In some cases, you will need to plug it in the first place, in others, first install the driver. The order is important.

  • How can I backup iphone external HARD disk?

    How can I backup iphone of my windows 10 external HARD disk?

    Is not possible. An iPhone can only be saved by using iTunes or iCloud.

  • How can I change the letter (h) to (g) on my external hard disk drive.

    I have an external hard drive that has recently changed, but I D letter (g) to (h) that contains all my files.  . When I opened the position of H/D get a dialog box:- "location is not available." Done G:\zipfix.vista\Desktop refers to a location that is unavailable.  etc etc" how can I solve this problem?

    Use disk management.  I believe that under Vista get you there in something like:

    Start > Control Panel > System and Maintenance > administrative tools > computer management > storage > disk management

  • RE; How can I add a cd rom disk driver to a top of the tower that has no one.and do I have to format disks before I can put them in the driver?

    I just bought a laptop drive for my laptop which do not have. What is the right device? If this is not the case, what camera to buy so I can record information from my computer to a disc, when I don't have a disk driver on my computer. also, I have to do something to the drive first in order to make it work?

    Here are the facts:

    I have an acer aspire one that isn't a disk driver (which would allow me to save my separately from the document, photos and videos).

    I'd like take what I have on my computer and store it on a disk. I thought I would buy a cd rom drive, then I could do it.

    but now that I have this cdrom drive. I'm going to download the document and it keeps saying disk (?), I put a disc Virgin installation cd in and it does not recognize. Do I have to format the drive? and if yes, how do I do that?

    I put in a cd (musci) and it plays very well.

    It records on my computer as drive D.

    IM missing some knowledge. someone can help me.

    I buy the wrong thing?

    What to buy to add to my laptop, so I can transfer my videos, photos and the paper out of my computer and on a disc?

    Thank you

    E-mail address is removed from the privacy *.

    I always use Nero or Roxio software, but Windows XP it has a function limited to do so.  First of all, if you must make sure that the drive you purchased is able to WRITE on the discs.  The vast majority are, but you should check that first.  Normally Windows will find the right driver for the latter and load it, but you can check the Device Manager to see.  XP if the memories are good, you click on Start-> support-> Device Manager.  Locate the entry of CD/DVD.  If there is none? or! next to him, you have the right driver.  Also, if your device came with a driver, it is another indication that you probably don't have something special for her.  Then, you will need to check to see what type of disc you have.  Many external DVD/CD players will read and write CD but not write DVD.  There are CDs CD - r and CD - RW.  CD - RW is to be formatted, but normally you don't format CD - r.  You just need to copy and paste to, click the disk, and then open Windows Explorer, on the drive, and you should see something like a list of files waiting to be burned to a disc.  Should be a button there to burn.

    Now, let me propose an alternative.  An external hard drive is much better for purposes of backup CDs.  You can buy 500 GB for $70, and 1,5 to ones for about $ these days $100.  You can also buy flash drives.  You can get a 16 GB one for $10.  These would be at least 1600 pictures.  You can also buy 32 GB for $20 flash drives.

    I hope this helps.  Good luck.

  • Impossible to assign the external hard disk drive letter

    Original title: external hard drive

    put an external hard drive on my hp 630 7 victory, I hooked an external h.d. off a dell desktop comp. and it manifests under disc mng. but I right click and I can't assign a letter... just shows 'change in dynamic disk' or 'offline' or 'help'... What do I do?  been monkeying around trying things and I have noticed in the global disk when I looked that hard drive is 100% free in two partitions... as it does not appear in the page comp. so I go to disc project and then make a right click and when it shows a volume is deleted, what should I do, that make a difference in formatting so I can assign a letter of

    Hello Charles,

    Please contact Microsoft Community. I appreciate for all the research you have done.

    I can understand the inconvenience caused, be assured that we are here to help with your concern.

    This problem can occur if the hard disk is not formatted.

    Method 1:

    I suggest you refer to her below links to format the hard drive and then try to assign the drive letter for the drive and check if it works.

    To format the hard drive refer to the article.

    http://Windows.Microsoft.com/en-us/Windows/create-format-hard-disk-partition#create-format-hard-disk-partition=Windows-7

    To assign driver letter refer to the article.

    http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

    Important: Formatting a volume will destroy all data on the partition. Be sure to back up any data you want to save before you begin.

    Note: You can check out the link below to see how you can back up your files.

    http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

    Note: If the problem persists, continue with method 2

    Method 2:

    Enables or disables the automount feature. When enabled (default), Windows automatically get the file system for a new basic volume or dynamic when it is added to the system and then assigns a drive letter to the volume. Please follow the steps below to enable the automount feature,

    1. Open the Start Menu.
    2. Type cmd in the Search box.
    3. Right click on cmd and click run as administrator.
    4. At the user account control prompt, click Yes .
    5. Type diskpart and press enter.
    6. Type automount enable and press enter.
    7. Reconnect the external hard drive and check the issue.

    The above information was hoping to get useful, please return it to us if you need additional assistance.

  • assign the external hard disk drive letter?

    How to assign the drive letters of external hard drives?

    Done Windows that after connecting the HD, turn it on.

    There must be a valid and formatted file partition before he gets a drive letter.

    Disk storage/tools/Control Panel/Administrative management control

    -steve

  • Restore files deleted to new destination OR change the name of the external hard disk drive

    I deleted a mass usb (external hard drive) storage file that was installed in the F: drive at some point when pluging this backinto PC hard drive it has become the E: drive.  I want to restore the files removed from the Recycle Bin, and when I click on restore it tries to restore to former F: is not currently being used.  How can I restore to a different location or drive OR how to make the system to recognize the external hard drive as drive F: and not drive E:

    Hi Cschnell,

    I suggest you open the Recycle Bin and drag and drop to the desktop or your favorite place.

    You can also see the article for more information:

     

    Recover lost or deleted files

    http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

    I hope this helps.

  • Lightroom 5, letter from the external HARD disk drive

    I use LR 5 and store my images on an external drive 'f' raw Once I inserted an SD card on my PC from Win10, and he received the letter F on the SD drive. Later, when I connected my external drive where I store my raw, the PC files it G. Since then, I am unable to get LR5 to locate photos. I went into disk, reassigned management to F the drive letter for the drive external hard, then back to G since LR5 thought he was now drive G. other than the location manually each individual records, seems to have no other choice. Any help would be appreciated

    The simplest solution is to use disk management to reassign the external drive the desired letter.

    My recommendation is to choose a letter 'J' so that readers SD or other do not continue to change the letter on you.

    After that you have the letter assigned, go to Lightroom file Board.

    If the folder hierarchy does not appear as it does explore, right click on a folder and select 'Show the parent'. Repeat if necessary.

    Then 'move' the first folder on the drive with the new letter. Everything under this first file will be automatically updated.

  • Possible to repair permissions on the external hard disk drive?

    I use the Mavericks. Is it possible to repair the permissions of the drive on an external hard drive?

    Why would you want to? Just put the reader to ignore the ownership and permissions.

  • What can I add two external hard drives?

    My most recent iMac has a Thunderbolt port and I have a bolt of lightning > FW 800 adapter. I have also 3 HDDs that still have firewire 800 (they actually also have USB, but it's only USB2, so this isn't an option). Is is allowed to add two (one using the FW cable adapter and then use a FW cable to connect two readers) as I sometimes like to copy things from one to the other.

    Yes, but the second disc will probably need to have its own power supply.

    (140900)

  • Satellite A500-18 t: is it possible to creat recovery external HARD disk drive

    Hello

    I just bought a Satellite A500-18 t and before the first launch, I wonder if it is possible to create the recovery disk on a USB external drive, rather than burning a DVD.

    No, something like this is not possible.
    Please create recovery DVDs and do not forget, that you will lose not.
    To create recovery discs, I recommend using the media high quality as TDK or Verbatim DVD-R.
    I had very good experiences with the media in the past.

Maybe you are looking for