Can I Add Bluetooth in Satellite P100-194?

Similar Questions

• What memory can I add to my Satellite P100-221?

  Hello
  What memory can I add to my satellite P100-221? I want to buy 2 * 2 gb

  Only Kingston SO-DIMM, 2 GB PC5300 DDR2 SDRAM, KTT667D2 / 2G match?

  > The report system in Windows (i.e. Rclick my computer etc) will report much less than 4 GB. It is a "bug" in the reporting process.

  Just for info: http://support.microsoft.com/kb/929605/en-us

  According to the specifications of the laptop, you can use monitoring of RAM modules:
  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G(DDR2-667 1GB Memory Kit)
  PA3513U-1M2G(DDR2-667 2GB Memory Kit)
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Good bye

• What memory can I add to my Satellite P100-119?

  Hello..

  I would like to add new modules of memory to my P100-119. Initially, it contains 2 Modules of Elpida, PC2 4200 (DDR2-533) with 512 MB per module. I would upgrade to 2 GB RAM and I have purchase 2 Modules of MDT, PC5300 (DDR2-667) with 1024 MB per module.

  I've built in the new Modules, but the screen remains blank, the system does not boot... BIOS is the newest Version 4.20 since November 2007 a the integrated Intel 945 PM Chipset Express also supports the DDR2-667 Modules.

  Where is the problem? Is - this incompatible RAM with the laptop?

  Hello Matze

  I presume that there is compatibility problem. If you want to have high quality and 100% compatible RAM module use:

  1 GB memory PC2 DDR2 (667 MHz) PA3512U-1M1G
  2 GB memory PC2 DDR2 (667 MHz) PA3513U-1M2G

• Satellite P100 - 194 defective Contact on the main power connector

  Hello

  Two and a half years ago, I bought my Satellite P100-194. Yesterday, I noticed that I can't use my cell phone on my diet. At first, I thought power has left his job, so I opened it. Today, I checked the entire power supply with a voltmeter. It still seems to work, it gives me twenty-six volts at idle.

  After that I checked the connector of my diet and I noticed that it seems not hold very tight in the case of the laptop. So I think that my connector has a contact in loose / faulty.
  After that I googled to find some people with the same problem and it was written that Toshiba may fix this loose contact by changing the whole motherboard for about three hundred Euros.
  Due to the fact that I am a student, I don't have that kind of money.

  Have you any advice for me to get my laptop working again?
  Or do you think I have a quite different problem?

  Thank you
  Bastian

  Thank you

  null

  Hello

  In my opinion, you should visit the nearest Toshiba service provider. Explain the situation and perhaps, they will be able to solve this problem without Exchange of motherboard.
  Maybe they'll just resolder the connections.

  Talk with them. Be just cool and pleasant. Maybe your charm will help you. ;)

• Silent CD/DVD drive acoustic does not work on Satellite P100-194

  Satellite P100-194 (Win XP MCE, Bios-Version 2.20)

  Given that excessive vibration of the drive DVD-Multi-with some of my DVDs and CDs, I would not use the acoustic silencer, but West no difference between Silent Mode and Normal Mode.

  I tried to reinstall the silent acoustic tool, without success. As this problem starts to get really annoying, any help would be appreciated.

  I wonder if the built-in-multi-DVD player is sensitive by default (sometimes entire Notepad starts vibrating combined with a noise level very high during playback of a dvd)?

  Thanks in advance!

  Hi WB,.

  I think that acoustic silencer simply limited the rate at which information can be obtained on CD/DVD in order to prevent the rotation high speed that can sometimes occur when extracting the CD or the DVD to the hard drive. If you're just watching DVDs (or listening to CD, by the way) then the speed of the drive will be not particularly high because once the buffer is full so there is no need to read more data from the disc itself. If you look at the car LED, you'll see that it only lights intermittently ever.

  The speed of the drive will decrease during playback, as the laser reads information from the outer part of the disc surface.

  The presence of noise and vibration normally indicates that the disk is "eccentric" or is not set centrally in the reader, and this may indicate a possible problem with the clamping mechanism itself. However, it is always worth checking that the center hole of the disc itself has no Burr or pieces of materila which he would lift off, and it is also useful to check if the label of the disc (assuming that it is a type of stick on paper) is properly attached and has no loops or bubbles in it since this may also cause noise of air.

  I have the experience of a couple of game of CD-ROM discs that cause a lot of noise and vibrations in my book and recording, I found that the central hole was slightly shifted.

  Kind regards

• Satellite P100-194: blue screen - nv4_disp is in an infinite loop

  I have a Satellite P100-194 since 28.08.06 and I get this blue screen telling me that the nv4_disp (I think it's the graphic driver nvidia) is in an infinite loop.

  Error message:
  ---------------------------------------------------------------------------------------

  (English translation):

  "Device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the incorrect programming hardware device driver.

  Please check with your hardware vendor, updates to the driver.

  Technical information:

  "STOP: 0x000000EA (0x857F66E0, 0x85CL22D0, 0xF7C61CB4, 0x00000001)".
  

  ---------------------------------------------------------------------------------------

  Then he said something about the execution of a physical memory dump and I had to reboot.
  Sometimes the monitor turns off just (without blue screen) and I have to stop again. Or the screen shows several vertical strips during startup. in the case of windows window should come it gets black. I had this error 5 - 6 times since I bought it.
  This could be a damage on the geforce 7900 gs card or RAM may be defective or do I have new chipset... drivers?

  The drivers are the latest (from toshiba).

  Technical support told me to format the pc.
  The laptop is new and was very expensive, so I find it very strange that I need to update anything to make it work properly... ? ! ?
  Yesterday I formatted the laptop and reinstalled with the Recovery CD... because the error is sometimes, I don't know if it's working now, but I would be grateful for any HELP or comment on that.

  Thank you.

  Monika

  Post edited by: [email protected]_DE

  Post edited by: [email protected]_DE

  Hello Monika

  Please try this http://support.microsoft.com/kb/293078/en-us

  It's very strange because I know Satellite P100 is very good laptop of sole and this question cannot be sorted as any kind of common problem. If nothing helps, please contact your local dealer. They will help you.

• Can I switch HDD of Satellite P100 to A210?

  Hello

  I have two laptops Toshiba Satellite defective.
  One is a P100-160 with a faulty screen and the other is a 120 - 1 c 0 with a faulty hard drive and cannot be used at all.

  Is it possible to remove the HDD A120 - 1 c 0 install the HDD P100-160 in the A210 - 1 c 0?
  It's as simple as that, or do I have to update any software?

  The P100-160 has a 17 "(WXGA + TFT) display while the A210 has a screen 15,4" (WXGA TFT).
  If it's a simple switch of hard drives in the A210 then is there another thing that must be done before use?

  All the tips are greatly appreciated.

  Thank you very much.
  Happy new year.

  Hello

  Yes, you can move the disk HARD of P100 to A210 since the two notebooks support SATA 2.5 HDD.

  It s not very difficult to replace the HARD drive.
  Here are a few examples:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

  Welcome them

• Where can I get WinXP MCE Satellite P100 ConfigFree

  Where can I get the latest version of ConfigFree for my Satellite p100 with Windows XP MCE? In my local site (RU) I can get version 7.00.23 (24), but this version only for Windows Vista. Help, please. Thank you.

  Hello

  I definitely found the free Toshiba Config utility on the Toshiba driver European page published by marina4000

  Use the (European Toshiba link) above link and choose

  * Laptop-> Satellite-> Satellite P Series-> Satellite P100 (PSPA3)-> Win XP-> Config free-> countries-> Russian language *.

  Then, you will get the ConfigFree for Win XP!

  Good bye

• Can I install Vista on Satellite P100-221?

  Hello. It is possible instead of Windows XP Edition Media Center for Windows Vista on model Satellite P100-221.
  Sorry for the bad English.

  I'm of the Russia.
  Valentine

  Hello, Valentine

  Of course, you can install Windows Vista on this laptop. If you need drivers to check it please http://pc-support.toshiba-europe.com/vista/

  Good luck!

• Can not turn on my Satellite P100

  Today my Satellite P100-115 off itself shortly after that I turned it on for the third time. I don't see the Toshiba logo at the beginning, in fact, the screen was all black. He died without making sounds or noises. I tried twice and then I took a DVD of data from the disk and it starts fine except that the time of Windows has been set back to January 2006, 00:00.

  Moreover, it was in hibernation. The battery was at and it was plugged too like others, it happened twice.
  What can be wrong? Should I go to the service before my motherboard says bye bye to me for good?

  Hello

  Remove the battery, connect the AC adapter and try to restart your laptop. If departure will successfully get into the BIOS settings and set data and time again. If everything works well boot OS and after 10 min, insert the battery again. Please let us know what happen when you try to do.

• Can I add bluetooth to my PC 15 hp laptop, model 15-g039wm

  I do not have realiuze I have bluetooth on my new pc. Not sure if I need to add it to my home group or how it is important that it be... Only use the pc at home.

  If I need it to connect, can you help me by providing information on how to add, etc. ?

  Thank you

  Barb

  The most common use of bluetooth technology is to synchronize the data with a phone that you can do with usb or to attach a bluetooth mouse or keyboard or a headphone as if you wanted to make the stone of rosette or something like that. It is not used to network with other computers, usually. If you have never actually used bluetooth I don't see why you need to have. If you feel that you are missing something in the way very easy to add bluetooth is with a cheap usb bluetooth dongle.

  $10 on amazon.com

  The other method would involve the removal and replacement of the wireless card to install one that makes the wi - fi or bluetooth connection. It would cost maybe $ 40-50 for the card but is not an easy task on your laptop model. It is no easy access door and would require fairly complete disassembly and would jeopardize security.

  Bluetooth is a feature of premium generally not provided at the lower end of the points of laptop computer prices, such as the models of Wal-Mart.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Notebook: Can I Add Bluetooth HP computer running Windows 10

  I recently bought the HP 15 '' notebook (touch) ac123cy.  I discovered after I received it had not any Bluetooth capability on this.  Is it possible to Add Bluetooth to the laptop?  that is a product I can buy?

  @lindabob2008105: Yes, the link leads to a search I did at microcenter for Bluetooth adapters: http://www.microcenter.com/search/search_results.aspx?Ntt=bluetooth+adapter

  You want the kind that plug into the USB ports.

  You can find similar items at Best Buy and online at a variety of computer stores.

  Good luck

• Re: Satellite P100-194 PSP6AE sound does not work under Vista 32 bit

  Hello world

  I got a nice Satellite P100 and configure Vista for a friend. I don't have the CD that came with the computer, so I installed those on the Toshiba site. I found out later that there is a proposed order of installations, and there is no chipset driver for Vista, so I used the XP one.
  As far as I got, everything works fine but the laptop remains silent. There is no sound from the speakers at all. Windows says it all was going well and there is a level moving in the sound mixer, but he remains silent.

  Does anyone have an idea what I could check or change? I would be very happy!

  Thanks in advance,
  Markus

  From my point of view, there is a hardware malfunction.
  Why? Because the sound through headphones. Therefore, it is not a software/driver problem.

  But what you could do is to check the audio playback device by default:
  Go to control panel of-> sound-> the Read tab
  Here the speakers should be peripheral activated and chosen as a default value.

• Bluetooth on Satellite P100 - how can I put it to "always receive"?

  Evening chaps - I have never posted on these boards before because I've never really had the need, I've done very well solve the problems in the past by looking around. The people here seem pretty useful and all the advice was clear and useful. But now I have a little problem that I could do with a helping hand, f someone is ready...

  I'm a DJ, running a Toshiba P100, play videos, athletics tracks and generally VJ - ing it for my players. I also want to run a slide show that comes under my VJ software, including pctures beamed in by clients. However, every time I have sent a photo / file by Bluetooth, I have togo through the wholw Pálava to manually accept the file as part of Toshiba Bluetooth. In an ideal world, what I would like is to set up the allincoming files to save automatically to a folder that I can keep an eye on and drag - move those I want to use it as I hear it.

  Anyone know of any proceedings or of the dialog to allow my P100 receive files in a frame 'Always On '?

  Run, have to revert to my concert tonight, it is. In advance, thank you for any advice you can give me...

  See you soon.

  You can do the following to disable confirms the window of reception for files and images:

  Start "Bluetooth settings"-> Bluetooth-> Options...-> security-> custom level...:

  -> Bluetooth information interchange: tick 'display a confirmation message upon receipt through File Transfer (FTP) '.
  -> Security setting for transferring files (FTP): check "perform authentication and encryption (server).
  The last parameter is optional, but highly recommended.
  -----
  -> Bluetooth information interchange: check "display a confirmation message upon receipt through Push (OPP) of the object.
  -> Object Push (OPP) security setting: check "perform authentication and encryption (server).
  The last parameter is optional, but highly recommended.
  -----
  -> Bluetooth information interchange: tick 'display a message of confirmation receipt by Image Transfer (BEEP) '.
  -> Security transfer of Image (BEEP) setting: check "perform authentication and encryption (server).
  The last parameter is optional, but highly recommended.
  -----

  The last setting require once (first transfer) to enter any password (for example, 3298) on laptop and the same as that on the side sending device.
  Not required for other assignments. This forbidden that any unknown person cannot send files without your awareness (as you know a confirmation window will appear no more) to your laptop.

  Start "Bluetooth settings"-> Bluetooth-> Options...-> Bluetooth information interchange-> advanced...-> Image transfer / file transfer / Object Push...:
  Here, you can set default folders Inbox of the applications received. May be, of course, always the same.

• I can not turn off the microphone on Satellite p100-194

  No matter what I do, I can't turn off the microphone of shit, he's always watching on my speakers, I have all the right settings in the sound control panel... believe me!

  Does anyone know how to disable the security...

  * monitor on my speakers even when I uninstalled all the sounddrivers! ... * it seems to be a bios problem... HEEEEELP!

  is there perhaps a bios fix?... or no solution at all on this model, I use win 7 32 bit...

  Hi leon-k,.

  Usually, you can cut the speakers in the Windows sound settings. Go to control panel > hardware and sound > sound.

  Now, choose the recording tab as Akuma written and click Properties > listen. On this tab, you can change the volume and disable the microphone set.

  Check this box!