Satellite P100 - 194 defective Contact on the main power connector

Similar Questions

• Satellite P100-194: blue screen - nv4_disp is in an infinite loop

  I have a Satellite P100-194 since 28.08.06 and I get this blue screen telling me that the nv4_disp (I think it's the graphic driver nvidia) is in an infinite loop.

  Error message:
  ---------------------------------------------------------------------------------------

  (English translation):

  "Device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the incorrect programming hardware device driver.

  Please check with your hardware vendor, updates to the driver.

  Technical information:

  "STOP: 0x000000EA (0x857F66E0, 0x85CL22D0, 0xF7C61CB4, 0x00000001)".
  

  ---------------------------------------------------------------------------------------

  Then he said something about the execution of a physical memory dump and I had to reboot.
  Sometimes the monitor turns off just (without blue screen) and I have to stop again. Or the screen shows several vertical strips during startup. in the case of windows window should come it gets black. I had this error 5 - 6 times since I bought it.
  This could be a damage on the geforce 7900 gs card or RAM may be defective or do I have new chipset... drivers?

  The drivers are the latest (from toshiba).

  Technical support told me to format the pc.
  The laptop is new and was very expensive, so I find it very strange that I need to update anything to make it work properly... ? ! ?
  Yesterday I formatted the laptop and reinstalled with the Recovery CD... because the error is sometimes, I don't know if it's working now, but I would be grateful for any HELP or comment on that.

  Thank you.

  Monika

  Post edited by: [email protected]_DE

  Post edited by: [email protected]_DE

  Hello Monika

  Please try this http://support.microsoft.com/kb/293078/en-us

  It's very strange because I know Satellite P100 is very good laptop of sole and this question cannot be sorted as any kind of common problem. If nothing helps, please contact your local dealer. They will help you.

• Can I Add Bluetooth in Satellite P100-194?

  Can I Add Bluetooth to my P100-194? No extern Stick. Or infrared? I would like to connect my wireless UMTS-Mobile.

  Hello

  According to the Satellite P100-194 specification (PSPA6E0 should have BT on board. Please check this box.

  By the way: you can find label of BT in the lower corner of your laptop? Like this one http://aps.toshiba-tro.de/bluetooth/redirect.php?page=pages/faq/bluetoothnotworking.html

• Silent CD/DVD drive acoustic does not work on Satellite P100-194

  Satellite P100-194 (Win XP MCE, Bios-Version 2.20)

  Given that excessive vibration of the drive DVD-Multi-with some of my DVDs and CDs, I would not use the acoustic silencer, but West no difference between Silent Mode and Normal Mode.

  I tried to reinstall the silent acoustic tool, without success. As this problem starts to get really annoying, any help would be appreciated.

  I wonder if the built-in-multi-DVD player is sensitive by default (sometimes entire Notepad starts vibrating combined with a noise level very high during playback of a dvd)?

  Thanks in advance!

  Hi WB,.

  I think that acoustic silencer simply limited the rate at which information can be obtained on CD/DVD in order to prevent the rotation high speed that can sometimes occur when extracting the CD or the DVD to the hard drive. If you're just watching DVDs (or listening to CD, by the way) then the speed of the drive will be not particularly high because once the buffer is full so there is no need to read more data from the disc itself. If you look at the car LED, you'll see that it only lights intermittently ever.

  The speed of the drive will decrease during playback, as the laser reads information from the outer part of the disc surface.

  The presence of noise and vibration normally indicates that the disk is "eccentric" or is not set centrally in the reader, and this may indicate a possible problem with the clamping mechanism itself. However, it is always worth checking that the center hole of the disc itself has no Burr or pieces of materila which he would lift off, and it is also useful to check if the label of the disc (assuming that it is a type of stick on paper) is properly attached and has no loops or bubbles in it since this may also cause noise of air.

  I have the experience of a couple of game of CD-ROM discs that cause a lot of noise and vibrations in my book and recording, I found that the central hole was slightly shifted.

  Kind regards

• Display failed on the Satellite P100-434 - need to change the boot order

  Hello
  My Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.
  I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an external floppy drive in, the system reads what it wouldn't if it did not clear the message.
  Is what I would try booting from the dvd, but I need to know the keystrokes and above all, the timings.
  I think memory, it's F12 on first boot, but not sure after that.
  Running Windows 7 Home premium.
  Sorry for the lack of information, by making this post via my Nokia.

  > What I would try is booting from the dvd, but I need to know the keystrokes and, especially,.

  Try F2 or esc (it can also be a delete key)

• Satellite P100 - impossible to get all the sounds

  Satellite P100

  When I updated the new driver for the card its conexant it cause its failure. I drove behind the driver, and then all is well again.
  Little pain and I've hidden the update.

  Toshiba has changed the hard drive and now I am totally unable to get any sound. The volume control is not the issue and the Device Manager shows no problems.
  All seem well except that I have no sound.

  Any help is welcome.

  Hello

  What operating system you use, and you have installed the laptop using the Toshiba Recovery disk?

  If you use Windows XP you have two install two hotfixes from the Microsoft Knowledge Base: KB835221 and KB888111.
  Two updates are integrated into SP3 and you need to install the patches first, and then the driver.

  In addition, you should try to install the latest driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least, make sure you use the latest version of the BIOS.

  Welcome them

• Satellite P100: Multiprocessor is disabled in the BIOS v4.20

  Hello

  I have just updated the bios to 4.20, after reboot, I went to the bios settings and saw that the multiprocessor (the option for the use of 2 CPUs) is disabled.

  After I enabled it, the computer is very slow, and I had problems with starting the computer.

  When the multiprocessor option is disabled, the computer works ok, but the Task Manager indicates that a single processor.

  I had to go down to the bios to version 4.00.
  I would like to know if there is another solution for this.

  Hello

  In front of me, I have Satellite P100-191. I did the BIOS update to version 4.20, and in my case, Multiprosessor is undoubtedly permissible. In this case, the entry in the Device Manager shows 2 processors.

  I disabled this option and the laptop runs slowly than before and in the device manager what a processor is listed.

  I don't really know what is wrong in your case, but I can confirm that the Satellite P100-191 friends, everything works well.

• Satellite P100-473: I can run without battery & power sector

  Hello

  I would like to know if I unplugg my battery of my laptop if I use it plugged in.

  Thank you

  Of course, you can run Notepad without the battery and only connected to the main power supply.
  You don't have to be afraid. Will not damage the laptop.
  I use my laptop without the battery. Why? Because it does not more ;) It s too old.

• Re: Satellite P100-429 - how to upgrade the BIOS?

  How do install the BIOS after download as I canoe find the beginning of the installation in the downloaded files?

  Any help is appreciated as I am new on this.
  I have a Satellite P100-429 PSPA3E

  You must start the WinPhlash.exe file to start the update of the BIOS.

  In addition, here are some practical info on the update to the BIOS:
  http://www.toshiba-tro.de/biosinfo/

• Satellite P100-160 - how to connect the camcorder?

  Hi all!

  Can anyone can advise, try to connect the Sony camcorder with 4 pin i.link, but can't seem to connect the two devices.

  I have AC power on the camera, tried to use the other movie maker, adobe, etc. no joy.
  is thinking why is this?
  Thank you

  Hello!

  As Garrett Satellite P100 supports the firewire port.

  Normally, the port is always on and you need an application that does not recognize your camcorder correctly. You can then copy the videos on your laptop.

  Good bye

• Satellite P100-160, not compatible with the latest games graphics card

  My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...

  Recently, another solution I've heard of is an external graphics such as the Asus XG station...
  http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
  either this...
  http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/

  However these devices large need an express card slot, which I'm not sure that this laptop has even?

  If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?

  Thank you

  Richard

  Hello

  The Intel graphics card is simply not powerful enough to handle the latest PC games.
  You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?

  The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
  You cannot add also all other ports for laptop. It is not possible :(

• Re: Satellite P100-194 PSP6AE sound does not work under Vista 32 bit

  Hello world

  I got a nice Satellite P100 and configure Vista for a friend. I don't have the CD that came with the computer, so I installed those on the Toshiba site. I found out later that there is a proposed order of installations, and there is no chipset driver for Vista, so I used the XP one.
  As far as I got, everything works fine but the laptop remains silent. There is no sound from the speakers at all. Windows says it all was going well and there is a level moving in the sound mixer, but he remains silent.

  Does anyone have an idea what I could check or change? I would be very happy!

  Thanks in advance,
  Markus

  From my point of view, there is a hardware malfunction.
  Why? Because the sound through headphones. Therefore, it is not a software/driver problem.

  But what you could do is to check the audio playback device by default:
  Go to control panel of-> sound-> the Read tab
  Here the speakers should be peripheral activated and chosen as a default value.

• Satellite P100-188: how to perform the procedure for recovery of the product?

  Hello

  I just had a bit of trouble to install a piece of software that, in the end I could settle with a system restore. This process was worried at the time that I could not get the software uninstalled properly (I had to download a program from the machine to uninstall!)

  At one point, I considered the restoration of my laptop Satellite P100-188 with the product recovery disc, the thing is I never did this before and I was wondering if someone could tell me the best sequence for later use.

  I have a standard Windows Media Center Edition OS, a recovery disk of the product, a disk Express Media Player and a CD of Drivers and tools that I created when I got the laptop.

  I have a feeling telling to restore Express Media Player before Windows, is does that mean that I have to insert this disc, install Express Media Player, then insert recovery disk product to install Windows?

  The Express Media Player disc formats the drive? It's not clear to me and I don't want to run into problems when I finally don't have to reinstall my operating system.

  I searched this forum to see if this information was already posted and could not find all the relevant information, all I can find are problems with the help of recovery and lack of discs discs.

  If it has been posted before could you provide me a link and I'm sorry again calls for data.

  Hello Gary

  If you want to have own OS preinstalled, the best solution is to use supplied recovery media. If the Express media player works well the leave it as it is and use the recovery DVDs only for clean operating system installation. All that s!

  Tools and Utilities CD can be used if you need to reinstall Toshiba designed tools or if you want to install your own operating system by using the facilities of Microsoft CD. If you have any other questions please post again.

• Satellite P100: I want to update the driver, but I don't know the number of the system

  Hello

  I'm trying to upgrade the drivers on my P100, but I can't find the exact number of system.

  I noticed a bunch of them on the driver download page.
  We bought the system enough a few months ago and threw from the packaging etc.

  What do you mean by number of system?
  Model number, do you mean books?

  Well, everything need are the first 5 characters or digits of the model number.
  Then select the model P100 of law number in the Toshiba driver page and download it!

  The model number can be found on the bottom of the unit.
  Just check the labels.

• Fan does not stop on Satellite P100-194

  How can I stop the fan? It works very, independent of all the parameters of CPU speed or powermizer settings. Is not very strong but quite hard to hear.

  Is there an improvement in the update of the BIOS of the 27.7.2006 or what else can I do to stop the fan?
  I tried with NHC as I did with my other laptop, here it worked perfectly.

  Hello

  First of all, it would be nice to know your name detailed for laptop.
  Also if fans run every time so I guess that it of necessary to cool the CPU.
  You wrote something about powermizer settings.
  On Toshiba laptops, you should find the Toshiba Power saver. There you can change the settings for each power mode.
  Also if she won't help so I would recommend comparing the visions of the BIOS of your laptop and on the page of Toshiba.
  If there is a newer version, so you should try to update the BIOS.
  Be careful! Make sure you use the good BIOS and the proper procedure!

  If after updating the BIOS the fans won't be won't stop or will work continuously if you could check in the grids of cooling modules. Eventually, the dust and debris inside the laptop is responsible for this issue.
  In this case, you can try to use carefully vacuuming to clean the fans.

  In addition the square around the laptop must be free due to the circulation of air.