Can I add ram on this machine?

Similar Questions

• Can I add ram from 1 computer to another identical to increase the ram

  can I add ram to a spare identical to another computer to double the RAM

  Hi André,.

  Yes, you can add RAM to another pc Modules to existing pc provided:

  1 RAM capacity is within the limit supported system (see your hardware / manual of the motherboard).

  2 must be of the same type and clock speed.

  I hope this helps.

• can I add additional VMDK virtual machine that is already protected with vSphere 5.1 replication?

  Hello

  We're uaing SRM 5.1 to protect a virtual computer by using the replication of vSphere. now, we want to increase the size of one of the vmdk dirve. can we increase the size of the disk? and if we don't, then, can we add an another VMDK to this virtual machine?

  What is the procedure to protect that additional newly added VMDK?

  Thank you

  Hello

  Please see the following topics in vSphere replication 5.1 documentation (replication reconfiguration).

  Yes, you can add an another VMDK to a replicated VM. Replication goes into an error state, and you must reconfigure replication and include the newly added to replicate disk.

• Physical disk how can I add in the Virtual Machine?

  I am trying to set up a network of storage, but I discovered it is there is a limitation for the addition of physical hard disks in the virtual machine.

  I have 1 virtual hard disk for the operating system (SCSI), an invited so I try to add more than 4 disks, but it should not add more than 3. They showed that (IIRC).

  I try to add 4 x 1 TB as physical hard disk in virtual machine hard disks, but it says that I must remove one to add.

  1. in the settings of the Virtual Machine, is there a difference between (SCSI) (IDE) and why are the physical disks (IDE)?

  2. What is the limitation of total hard drives under the VM settings, four?

  Johwwy

  physical disks can be detected such as IDE or SCSI - depends on the drivers used by the host

  SATA in ide-compat mode is used as IDE

  SATA AHCI mode is detected as SCSI

  It is possible to rewrite the descriptions after their creation.

  It is a little advanced - see my notes

  http://sanbarrow.com/VMDK-basics.html#changeadapter

  for a start, it may be necessary to also change the geometry... ask first so uncertain.

  I think the limit of physical disks that can be attached to a virtual machine is 64 = 4 x 15 - scsi and IDE 4-disc drives

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• I made a spreadsheet in numbers, but now I can not add or edit this spreadsheet. Why?

  I made a spreadsheet in numbers, but now I can not add or change it. Why?

  Hey nixon,.

  Your document is maybe in the Print Setup. Click the done button.

  Kind regards

  Ian.

• How can I add RAM?

  I have Windows Vista Home Premium, but it is slow. I have a dual CPU AMD Athlon 64 x 2 4400 + 2.30 GHz, which tells me is powerful, but I don't have a lot of RAM - 1918 MB only. I have two slots of RAM left inside my computer. Where can I buy RAM cheap and what type do I? Should what features I look for? Should I pay attention to tracks or SATA or GHz stuff or what? I don't know how to make sure it is compatible.

  Hello

  the best way is to use a sweep "crucial" to verify that your motherboard is for ram and advise what compatible size and speed to buy

  site link Web and crucial scan

  http://www.crucial.com/

• How can I add a HP2600 multifunction Machine to HP Solution Center?

  I have the HP Solution Center installed on Windows/7.  I have a HP 3970 Scanner installed on this PC.  I have HP Solution Center installed and the HP 3970 on list of scanners HP Solution Center.

  I have a HP 2600 multifunction printer/Fax/copy/Scanner installed on my wi - fi router and installed on my PC connected via WI - FI.  I would like to add the HP 2600 to the list of scanners HP Solution Center.  How do I do that?

  The steps below are for this printer on a computer model no HP.

  Starting a download:

  1. run the disk cleanup on your computer

  2. download and run the software and the drivers below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 421139 & sw_lang =

  3. once the download is done retrieve, cancel the Setup program.

  4. click on the start menu.

  5. type % temp % in the search field

  6. Locate and open the folder starting with 7z (example: 7zS2356).  If you have not run Disk Cleanup it can be several 7z folder.  Just look at hollow each one to find the right one.

  7 open the Util folder

  8 open the CCC folder

  9. run Uninstall_L4.bat

  10. once the uninstall is complete, restart the computer

  11. install an Accessories\ System Tools Disk Cleanup

  12. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  13 use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.

  http://www.iobit.com/advancedsystemcareper.html

  14 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 421139 & sw_lang =

  15. run the download to reinstall the printer

  Let me know what happens.

• I can't add RAM

  I have a WindowsXP Pro Tour. It has 3 SP. I was decide to add more ram to my computer because it has only 512 MB of RAM. It has an Intel Pentium 4 CPU 2 .66GHz and an ASUS AGP-V7700 Deluxe v5.33 AKA GeForce 2 GTS. The motherboard (The ECS P4M800PRO - M 1. 0) says it is only capable of 2533 DDR or DDR 400 RAM. So I went out and my bit of DDR3 RAM and install it. Then I try to start it, and there is no beep. I was wondering how can I fix to make it work.

  So, if I interpret you correctly it does not work with all the 3 RAM sticks inserted. No surprise - as stated earlier...

  The jury does not support simultaneous use of the two types of memory, i.e. you fill in only blue locations or only the purple slots, but never both at the same time.

  Take the original memory, insert the memory purchased. Do you still have a BSOD? If you do them chances are that...

  1. One or two of these purchased modules is not compatible with the motherboard, or
  2. The memory purchased modules are not compatible with each other, or
  3. One or two of these modules bought is defective

  .. .and you must check with the provider, if your DDR memory modules are compatible with your motherboard and between them.

  If you do not get a BSOD, it is probably by mixing the two types of memory. You must now run Memtest86 + against your purchased memory - download the iso, burn it to a CD, boot from the CD to start Memtest86 + to check your memory isn't faulty.

  http://www.memtest.org/

  If your provider can check compatibility, you can also use Memtest86 + to check the modules for defects.

  PML and Bill Smithers have already indicated how to get compatible memory.

  For the record, the plan of action for you to the correct/best should have buy a compatible DDR2 memory bar and fill the purple free slot with her (DDR2 is faster than the DDR).

  Tricky

• How do we install creative suite if I have a disk but no disk drive? also, I need to do a 3rd installation because the 2nd copy was on my macbook pro, which was destroyed by water damage, so I can't remove it from this machine

  Please can you help mind meanings. Thank you

  Hello

  Please see the link below according to your Version of Creative suite:

  https://helpx.Adobe.com/download-install.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html

  You can also check https://forums.adobe.com/message/7960485#7960485

  Let us know if it helps!

  Kind regards

  Aurélie

• Desktop Pavilion: h8-1010: I have a desktop HP Pavilion: h8-1010; Can I add bluetooth to this computer?

  Product #: QN557AA #ABA; [personal information]

  At any time.

  I am pleased to have been of assistance.

• How to add RAM to Envy 17 laptop

  How can I add RAM on my laptop 17 envy?

  It's a flag 17 t

  Serial number [personal information deleted]

  Product LW900AAR

  Windows 7 64 bit

  I t has currently 6.00 GB installed memory.

  What is the chip number?

  How can I add?

  THANKS IN ADVANCE!

  Hello

  From everything I read it seems that you have a max of 16 GB for your specific unit and if I'm not mistaken, you should have an open memory slot to expand. Here is a link to a third HP recommends for buying memory, I pulled up information for your exact unit:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/envy-17t-3000-CTO

  Good luck

• How to add & quot; Print this page & quot;

  How can I add the "Print this page" option so that it will open a resized page that can be printed?

  http://www.alistapart.com/articles/goingtoprint/

  "Mr_Torch" wrote in message
  News:eiqm4a$2KP$1@forums. Macromedia.com...
  > How can I add the option 'Print this page' so that it will open a
  > resized the page can be printed?

• I have a Macbook Pro mid 2012 edition, i7 and 8 GB (2 x 4 GB) of RAM DDR3 (1600 MHz). Can I add any RAM with this config?

  I want to upgrade my RAM 16 GB (2x8GB) and also to change the hard drive (750 GB) to a 250 GB SSD. I was going through the forum and people have posted that they have improved their RAM with no problems. I visited the local electronics market and is the knowledge that they have a Kingston 8 GB DDR3 1600 MHz RAM. I just want to know if it is safe to add that RAM for my MBP or not? One of my friends told me that the MBP requires a different sort of RAM so I am confused. In addition, I was intending to buy a single 8 GB and set up my MBP with 12 GB (8 + 4) RAM and then replace the other 4 GB with an 8 GB to make eventually 16GB. Will there be a problem with this approach? Also can I add any SSD fits laptops from my system? I found an SSD 240 GB (uv300) Kingston. Please suggest if I can add that.

  You can fit a maximum of 16 GB, if you choose compatible Ram.

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Adding RAM to a HP2-1310. There is an open slot where I can simply add another 4G?

  Hi, I need to know what I need to do to add RAM to my HP2-1310.  I know he now has 4G and is a 64-bit system that will be 8G, but I can't find anything that tells me if I need to replace what is there now, or if she has a slot with 4G inside and an empty slot, if I can just put in another 4G.  Any advice would be appreciated.  Thank you.

  Marty

  Hello

  It has two slots , you can upgrade up to 32 GB of RAM:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+P2+Series/HP+P2-1310-upgrades.html

  You can use the link above to check the RAM on your machine or simply open the case to check. Alternatively, you can use the following program to check:

  FTP://94.23.15.50/CPU-z/CPU-z_1.66-Setup-en.exe
  
  Kind regards.