Can I allow each users to test my app on their Simulator on PC?

Similar Questions

• How can I allow the user to take a quiz in the middle of it in Captivate 7?

  Hello Captivaters,

  I want to the learner of a test until he could continue on the training of the force.  If it does not pass the test, he will have to go back and resume. "Recovery" button allows him to do this, but I really want to have 4-5 of these checkpoints 'quiz' in e-Learning - separated with presentation material - so the user proves that he understands the material before moving forward.

  This is why I would create my own button "recovery" at the end of every "checkpoint quiz" that leads the learner to the first issue of this checkpoint (not to the first issue of training).  So far, I was able to create a button that appears after it receives a correct quantity to allow him to continue, and I want to create a button that appears and brings it to the first control point question if is nott get the correct amount and return to these questions.  The first part is easy, but I also need to add the function or reassign a variable to allow the user to resume the quiz. I hope I'm making sense... Any help would be appreciated!

  -Ryan

  Your recovery button (s) will have an advanced standard action at least these two statements and in the following order:

  • Go to slide to score
  • Go to the question slide

  Jumping to the slide of score and so that there are attempts to Quiz on the left, the next attempt will be launched (you can check if you put the system variable I was talking in a text container timed for the rest of the project). Then you jump to the slide where you want the user to return to the questions.

  You may have to make it a conditional action advanced, if you want to first test the result?

  Lieve

• How can I allow the user to enter the 5 digits in an inputText and who must be a number.

  Hi Experts,

  JDev 12.1.3.0.

  How to allow the user to enter only 5 digits for an inputText and there should also be a number?

  Thank you

  AR

  Try with:pattern="[0-9]{1,5}"

  Dario

• How can I allow a user admin add/download a one page document?

  OK, here is the scenario... I created a page of documents on the web site of the customer where people can download documents (Word, PPT, PDF etc.). And my client has 3 admin users who use in the browser of the on-site Assembly. Admin users would like to be able to add their own documents to the page without sending them to me as a web download Designer. Is this possible?

  Hello

  Yes, they can add their own documents. Basically in 2 ways:

  -They can use Muse to add documents and upload them to the site.

  -As you use BC to publish the site, you can use Media downloads to download documents and link them to a page.

  For admin users can download documents, replace or remove of BC admin in media downloads section and the update of the page where the module will be used.

  Thank you

  Sanjit

• Can I limit some users to a particular question pool?

  I have 2 sets of learners who will be tested on a content different slighty in the same course of Captivate. How can I restrict the set of users to a set of questions?
  Thanks in advance.

  Hello

  What Captivate version are you on?

  Are your users aware to what group they belong?

  If it is 6 +, then rather than using two Question pool. You can create a Question of pre-test, ask questions about their GroupName (say A or B)

  And A choice you can create a branch to a set question and B, you can lead to another. (Select make-'branch to the current' Quiz - preferences settings-)

  You may need to refine it. But it would then depend on doing what the user chooses and the dynamically the course will line up for their group of Question.

  Thank you

  Anjaneai

• Can I allow an application for one person on my family share but does not allow for each other?

  Can I allow an application for one person on my family share but does not allow for each other?

  You can't delegate who has access and who doesn't have access to the applications. You can lock devices with age restrictions, so only items appropriate age are at their disposal. Or you can hide your list purchases. The purchased app can then be displayed when you want to share with someone else, then be hidden again once the application is downloaded on their device.

  I hope this helps.

  SI10

• How can I stop Firefox profiles great taking place on the C drive for each user?

  I have several users on a Windows Server 2008 R2 Remote Desktop Server (Terminal Server) and all of them use Firefox. Each of their profiles become huge because of their Firefox profiles.

  Seems that all the space the file cache. (C:\Users\User\AppData\Local\Mozilla\Firefox\Profiles\Profile.default\Cache)

  Is it possible to implement a policy within the program to clear the cache for each user or each time the browser is closed or when the user disconnects?

  Hello nukeit108, you can set the preference browser.cache.disk.enable to false, then no cache file will be written to disk (does not affect the entries cached in RAM).

  See also http://kb.mozillazine.org/Locking_preferences

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• Can I add an image field that allows the user to insert a picture on the form?

  I use LiveCycle CS3 and I would like to create a form that allows the user to add an image. Is this possible and if so, how?

  In LiveCycle, you can add an ImageField object library to the form...

  Execution, the user can click on the image and choose an image file in the local system and the display of the form.

  Make sure you check the image embed checkbox in the properties of the ImageField. Otherwise, the image may not be retained if you open the same file in another machine...

  Thank you

  Srini

• How can I allow users of CS update metadata on several items? (gR 10, 3 of the Complutense University of MADRID)

  In the 10gR 3 AAU portal user interface:
  
  It is convenient to allow us users to update fields of metadata on a group of items in a single action. We want to allow users to select any number of files of results of a search of CS.
  
  After selecting the items, we want users to be able to define new values for some fields (for example the security group and the Document Type) without touching the values of other fields of metadata (such as author).
  
  This seems to be a pretty basic feature, but we can't seem to find in the user interface of CS. What is the best way to do this in the user interface of CS?
  
  Thank you!

  Hello

  There is a custom component, component MassMetaData, which can be used for this specific feature. I've seen some users use it to update metadata on several items in one fell swoop.
  Maybe some of the consultants can be contacted to get their hands on this component.

  Thank you
  Srinath

• How to allow the user return to give lectures when they take a quiz?

  Hello world
  
  I'm new to Captivate and now I'm kinda in a dilemma. Thank you for your
  time to look at my post!
  
  I created a CBL in Captivate 3, the first 10 slides is a conference and he
  is followed by a quiz of 10 slides, defined as standard SCORM.
  
  I want that the learner must be able to refer to the Conference when they
  Take the quiz, I tried 2 approaches and they both
  issues in different ways.
  
  Approach 1: "allow moving backwards" and "infinite attempts. The
  problem with this approach is when the learner clicks on "review the.
  quiz"and when they click"back"on the first slide of questionnaire, all
  Quiz will start everywhere, the score is reset to zero.
  Because the quiz is seeing this as a new attempt and that the learner is
  permit to make "infinite attempts" such that it has been configured.
  
  Approach 2: "Allow moving backwards" and leave only "1 attempt.
  The problem with this approach is, when the learner is in the Middle
  Quiz and refers to the Conference, the quiz will be
  automatically shown as completed. And the learner will not get a
  chance to answer these questions unanswered.
  
  It seems that every time that I leave the learner refer to the Conference
  in the middle of a quiz, the quiz will be seen as completed. Who am
  I did wrong? Is there a better approach I can "allow backward
  movement' and always allow resumes user their quiz where they have left
  in the distance?
  
  Sorry for the long post, I was not able to express it in a more
  concisely.
  
  Any help is really appreciated!
  
  -David

  What you see is the behavior designed as in Captivate for the quiz.

  Each Captivate movie has a range of "quiz", which starts with the first measurable purpose and ends at the Quiz results slide.  If you enter the scope of quiz by starting a slide of questionnaire, then jump back away from quiz, to return to the basics, default behavior of Captivate is to freeze the quiz at this time here.  Then when Captivate refers to allow movement to the rear, it is talking only a move backward in the quiz.

  For example, if you get to question 1, but no answer and proceed to question 2 answer that we can go back to question 1, you will still be able to answer question 1.  The test will not be frozen.  However, if you had jumped to any slide before question 1, your quiz would have been frozen with everything that you mark had accumulated at this time here.

  There may be a workaround that you can use to get closer to what you want.  As any object that is classified as part of the quiz, you can add a button on one of the first slides that the user must click to move forward.  Set the properties of this button (or click on the box) to report a score for the quiz.  What makes a part of the scope of quiz.  Now, any content slides falling after this slide button are also within easy reach of quiz and return to them will not have the same effect of freezing the quiz.

  Please keep in mind another aspect of the quiz questions: If you answer a quiz question, and then move off the slide (forward or back) quiz question answer is frozen and cannot be modified unless resume you the Quiz or raise all of the module.

  Hope this helps to clear up how things work.

• How can I block the users access to microsoft office?

  How can I block the users access to microsoft office?

  You must set "" permission to run on each of the Microsoft Office programs (word.exe, excel.exe, powerpnt.exe, etc.) such that the group 'Administrators' and the SYSTEM is allowed to run.  To do this, you do a right click on the .exe file, select 'Properties', then click on the 'Security' tab and change security as you wish.

  If you do not have a 'Security' tab, then it is because you have XP Home Edition, or if you have XP Pro with active Simple file sharing.  For XP Home, you must boot mode safe (repeatedly tap F8 at startup key) and login as an administrator to access this tab.  For XP Pro, follow the instructions in the following article:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  HTH,
  JW

• It is necessary to download Google Chrome for each user on my Vista computer?

  Why, if I have more than one user, do I download google chrome for each user?  Is there a way I don't have to download a second for the other user?

  * original title - computer with more than one user *.

  Google Chrome since the normal download install personal folders to the user. This allows Chrome to be installed by users who have administrator privileges. Apparently you can install for all users with this procedure:

  http://www.Google.com/support/chrome/bin/answer.py?answer=118663

  Check Google forums, that applies and will be based in the future.

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• Allow the user to change the items in web application that they have not submitted

  Is there a way to allow a user to change/remove the elements of web app that they have not submitted?

  I did more than 400 pieces for the user via a .csv spreadsheet. I want the user to be able to change or remove these via an editing page of web app, I'll set up, but because I downloaded the .csv file, apparently, that another user cannot do this.

  At present, the only way that I know that this is so by the user submitting each element individually.

  Anyone know of a way to attribute everything to this user as if what he presented to them? Perhaps via the .csv file?

  Yes. In admin, you can change each element of WebApp to be attributed to a customer with the "presented by" in the section 'other Options '.

  You can also import/export this value, but in the CSV file, it is labeled as 'EntityId' - and you must use the system ID/ID of the entity of the client here.

  Otherwise, to allow anyone (who is connected) to change any element of WebApp, you must change the setting in the configuration of this WebApp by checking the option "anyone can edit items.