Can I burn with a gradient?

Similar Questions

• DVD - R can only burn with DirectCD - Roxio, Ultra ISO recognize CDburning only - why?

  Added a Lite-on DVD - RW DH20A4P model (last year) to archive the files from my old system.  Old system: Mobo is FIC AD - 11w / Athlon XP 1800 (NOT overclocked, running 1.67 Ghz) 768 MB mem, 3 disks hard w/640 GB of storage, Win XP home.  House built in 2001, updated 6 times.  As much as I know can I stay completely up-to-date.

  DVD only burn if formatted in DirectCD, and can add files to burn (rather clumsy, loses 600 MB + ability to format).  Ultra acknowledged the capacity DVD-burn ISO or Roxio 5.  Tried a few free programs, same result.  Tried stripping up to only 2 drives (C and DVD - no luck).  In addition, "my computer shows the DVD - RAM H drive and CD J drive, however there is no other CD player.  Capacity DVD opens and burner programs Raphael CD without problem but abort engraving showing "no dvd drive found" or words to that effect.

  What keeps programs to recognize the DVD burner?  They all read capacity but can not burn a file assembled on it.  What could cause this?

  Hey Newton,

  ·         The drive appears in Device Manager?

  I suggest that you run the next Fixit tool and see if it helps.

  Your CD or DVD drive cannot read or write media

• Can't burn a CD with SDR2102

  My computer does not recognize my CD - RW drive. I can play any audio CD and will read and run any CD, I put in my computer, but when I try to burn a CD it says no CD or recordable DVD's found. I have a Dell Laptop Inspiron 4000, running Windows XP Home Edition and a TOSHIBA CDRW/DVD SDR2102 drive. I tried reinstalling the driver, but he tells me that the driver is up-to-date.

  All shown in Device Manager appears as works fine. This system worked well in the past, many CD burning with a couple of different programs. For any help or suggestion would be greatly appreciated.

  Thank you, Brad

  Hello Brad

  I put t know how old the player has, but it is possible that the drive is faulty. Usually, the option of engraving went first and the calibration of the laser can not work. If this happens, you can use the drive to read the CD for a while until the reader is completely defective.

• Can't burn on a DVD + RW with DVD - ROM SD-R2102

  Hello
  I have a Satellite of 6000 Pro with XP. My cd - dvd drive is dvd - rom SD-R2102. I can read and burn CDs, I can read DVD & divxx but I can't burn it to a DVD + RW. Apparently, the cd is not recognized.

  Can someone help me?

  Thank you
  Damien

  Hi guys

  First of all @Ken Roots:
  Why you suggest you have the same problem, but when I compare the two messages so I put t see similar problems!

  Now @castor:
  In the manual, you should find the media (CD/DVD) that are compatible with your player.
  I found some info on the SD-R2102 and it seems that this car doesn t support the DVD + RW!
  http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=ISH_PRS&model=SDR2102&PTYPE=C OMBOSL

  Why you n t check compatibility first! Sorry, but I don't understand the people who write about problems and finally there is no problem.

• How can I create a playlist to burn with music from apple

  Songs bought through ITunes allows me to burn a playlist to a CD - R, are we able to do the same thing with Apple that has been downloaded music?

  Hello

  You can't burn Apple music on a CD - R because of the DRM. Unlike the securities purchased, you are only renting the music while you have an active subscription to Apple's music.

  Jim

• I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator, I can't find the project. How can I do?

  I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator during its use, I can't find the project. How can I do? I made in IMOVIE I force see where and how I can save the project

  I have an IMAC

  Hey fradel,.

  Looks like you need to export your movie, so you can burn it to a DVD using the DVD Creator Application.  Back on how to do it.

  Now I'm not sure what version of iMovie you use, but take a look at the links below for the steps to export the videos to your computer. Then you should be able to see those newly created files on your DVD Creator application.

  This first link is for the latest version of iMovie and the following link is for the previous. If you have a different version of let me know.

  iMovie (2013): export a QuickTime file
  https://support.Apple.com/kb/PH14734

  iMovie 11: export your videos in a folder from the Finder
  https://support.Apple.com/kb/PH2285

  Take care

• I can't burn a CD with Windows Media Player.

  I can't burn a CD using Windows Media Player. I use a Sony CD - RW 700 MB and the latest version of Windows Media Player.  My computer recognizes it as a blank CD, I can create the playlist to burn and when I hit the button to burn, Windows goes through the motions of burn the disc, but when I re-read the disc, there's nothing there, it's always a blank disc.  The same thing happens with itunes.  I tried to use a blank Memorex CD - R disc, but my computer will not even recognize it.  I burned the disks before using Windows Media Player.    Help?

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• can I burn bluray with my laptop?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help

  You cannot burn Blu - Ray discs with a DVD burner. You will need to get an external Blu - ray drive, get a shop to buy a laptop with a blu - ray player or put a new Blu - ray player on your laptop.

• Can't burn videos with creation of DVD on a DVD + RW disc

  I have been regularly using the creation of Windows DVD for burning slide /videos. I had in the past burnt an a project with .jpg images in a collection of slides on a DVD + R disc. It plays perfectly on my drive Blueray. Recently, I tried to burn a backup copy of this project on a DVD + RW. However, he does not play on the computer, a standard disk drive or BD player. Players do not recognize the disc. I tried to erase the RW but it takes 15 to 20 minutes just to read the disc, the drive keeps light glisten constantly and says that the disc is erased but when I re - save the project, the result is the same as before.
  I tried to reformat the drive. When I click with the right button on the drive and click on format it again takes forever and a training constant light flashing. The format window options are gray and do not respond to orders
  Thanks for any idea as to what is happening and what I can do to fix the hang ups I get.

  I have been regularly using the creation of Windows DVD for burning slide /videos. I had in the past burnt an a project with .jpg images in a collection of slides on a DVD + R disc. It plays perfectly on my drive Blueray. Recently, I tried to burn a backup copy of this project on a DVD + RW. However, he does not play on the computer, a standard disk drive or BD player. Players do not recognize the disc. I tried to erase the RW but it takes 15 to 20 minutes just to read the disc, the drive keeps light glisten constantly and says that the disc is erased but when I re - save the project, the result is the same as before.
  I tried to reformat the drive. When I click with the right button on the drive and click on format it again takes forever and a training constant light flashing. The format window options are gray and do not respond to orders
  Thanks for any idea as to what is happening and what I can do to fix the hang ups I get.

  =====================================
  It is possible that the DVD + RW rewritable is the problem.
  Some hardware is not fully compatible with them.

  Personally, I did not have much success with DVD rewritable.
  Verbatim DVD-R DVD have been reliable for me.

  When I need a copy of a home made DVD I create an ISO
  Image file... so I can quickly burn as many copies as I need
  without loss of time to re-encoding of the project for each
  copy.

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy...

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Ignore most of the download buttons and click to the left of the
  green circle with the white arrow... He says...
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  Good luck...

• Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please

  Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please

  Try to resave the EPS to the native .ai or .psd format (depending on whether it's raster or vector) and use it.

• can I burn a bly - ray in a folder like I can with a DVD?

  Pre10, win7 64

  can I burn a blu - ray to a foleder as I do with a DVD so that once it is fully coded I can burn bly - ray dics of the file in the folder, rather than having to encode them again what me same time can.

  I coded a project as a file m2t to 1920 x 1440 and registered, but my burning program wouldn't recognize it (Roxio Creator 2010) as it acknowledges the Video_TS files.

  Thank you

  I think it must be version 5 to manage Blu - Ray.

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• has had to change the password; Unable to add music to the playlist; can't burn music on the disc.

  problems with iTunes.  Failed to add songs to the playlist. can't burn music on the disc; Message (wait 90 days for download purchases). another received message (unauthorized;  "I have not authorized and renewed). Did not help.

  I have 2 iPads, 1 iPhone and iPod touch, so I need iTunes to synchronize. I'd like a different music player.

  Hello

  The problems you describe can be caused by outdated software.

  Make sure that iTunes and OS X are up-to-date.

  On your open the App Store, and select updates from the menu.

  On your iOS devices, tap settings > general > software update

• Can I burn on a cd/dvd burning several files (.fpbf)?  If Yes, how, because the application of each file to burn a blank cd/DVD?

  I created several burn (.fpbf) files that are sitting on my desktop.  I want to burn these file separated into one cd.  At present each file burn requires a blank cd.  Is there a way to turn it?

  Hey Bob79,

  Being able to burn a lot of files on a disk is a great feature of backup files and carry them.

  This article goes over how to burn items to a disc: OS X El Capitan: create and use a folder to burn

  The way it is configured in OS X El Capitan you can burn only 1 file to burn to a disc and not multiple.

  If you want to burn all the evidence of burning I suggest make a new folder to burn with all the elements that it.

  You should get the drive you want.

  See you soon

• After the last update can not burn DVDs

  Current enforcement 10.11.4 on Imac I5, end 2013 with external dvd player from Sony. Always had trouble make him start to burn but now can't burn DVDs at all. Get connection errors, low connection errors and even several icons on desktop DVD. 14 with good quality dvd using toast. USB is connected to the directly to the mac. ResetPRAM, transported to various ports usb. Sometimes dvd will go up but not available or when you are ready to burn receive error messages. Before last update worked most of the time. Such a simple tsk, which has always been a test since the disc removed.

  Try reinstalling the toasts with the connected reader.

  If this does not work, try resetting the SMC: reset the management system (SCM) controller on your Mac - Apple Support