Can't burn a CD with SDR2102
My computer does not recognize my CD - RW drive. I can play any audio CD and will read and run any CD, I put in my computer, but when I try to burn a CD it says no CD or recordable DVD's found. I have a Dell Laptop Inspiron 4000, running Windows XP Home Edition and a TOSHIBA CDRW/DVD SDR2102 drive. I tried reinstalling the driver, but he tells me that the driver is up-to-date.
All shown in Device Manager appears as works fine. This system worked well in the past, many CD burning with a couple of different programs. For any help or suggestion would be greatly appreciated.
Thank you, Brad
Hello Brad
I put t know how old the player has, but it is possible that the drive is faulty. Usually, the option of engraving went first and the calibration of the laser can not work. If this happens, you can use the drive to read the CD for a while until the reader is completely defective.
Tags: Toshiba
Similar Questions
-
I can't burn a CD with Windows Media Player.
I can't burn a CD using Windows Media Player. I use a Sony CD - RW 700 MB and the latest version of Windows Media Player. My computer recognizes it as a blank CD, I can create the playlist to burn and when I hit the button to burn, Windows goes through the motions of burn the disc, but when I re-read the disc, there's nothing there, it's always a blank disc. The same thing happens with itunes. I tried to use a blank Memorex CD - R disc, but my computer will not even recognize it. I burned the disks before using Windows Media Player. Help?
Hello
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
themselves at the start because they will be competing for resources. This does not mean that this issue has been
caused by those, however, it's a possibility depending on which and how many you have installed.You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Can I burn a DVD with surround sound 5.1 PE10?
I'm experimenting PE10 to see if it does what I want.
I created a small project based on the HD AVCHD 5.1 project preset and have imported a few clips with ac3 for audio files.
When I play the videos in the application, the sound surround works very well.
I burned the project on DVD, but when I play the DVD on my DVD drive (plugged into stereo) I don't get sound no go my surround speakers, only forward and Center/subwoofer speakers.
I tried other presets of project and the creation of a 5.1 audio channel in importing an ac3 file and adding especially tracks. The problem with this is that the sound surround sound does not work in the application, and I checked the audio preferences and played with the settings.
So, my question is if I can burn a project with 5.1 audio on DVD to be played on a DVD player?
Unfortunately, he cannot encode pre DD 5.1 SS, but only import who and then mixing stereo (2 channels).
PrPro even need optional Minnetonka Audio / over-codes SS SD plugin 5.1 (~ $ 250), do it. PrPro, we can create a DD 5.1 SS DVD or BD, through recall (the included authoring application), but yet will write ONLY the DD 5.1 SS AC3 (through than SurCode plugin) and can not watch the DD 5.1 SS, but PrPro can, so monitoring all should be done before yet. Yet can also write other extra Audio streams, such as DTS, ProLogic, etc., but who MUST be imported into the still and SHOULD be 100% DVD/BD-compliant in all respects.
Good luck
Hunt
-
Can't burn any DVDs with my Satellite A660
I have a DVD burn on my laptop Satellite A660 number but I can still play DVDs with full transparency.
I caught the error in the disk creator.
http://S10.postimg.org/wuzwxi9c9/DVD_Player.jpg
I tried 5-6 DVD and all give the same error.
Try to clean the lens ODD.
Have you tested with different burning applications?
-
Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.
Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?
Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.
Hi, Dorian,
Thanks again for your response. Really, I apologize for the inconvenience caused to you.
You can try these methods to solve the problem.
Method 1: Run Windows Media Player Performance convenience store.
Please follow the steps below to do so.
(a) press Windows key + W keys on your desk.
(b) write the Troubleshooting in the search box in the upper right.
(c) select the Troubleshooting option after the search.
(d) select the option of Performance of Windows Media Player .
(e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.If the problem persists, use method 2.
Method 2: Follow the steps in the link here and burn the CD or DVD.
Burn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player
I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.
Thank you
-
How can I burn a DVD with Dolby Digital 5.1?
Hello!
I have a BIG question...
I edited a film in Premiere CS4 and I added Dolby Digital 5.1 working greate in first.
But when I use a dynamic link to Encore CS4, the sound will be in 3.0 for some reason any. And when I burn on a DVD and try it, I hear that sounds of the left front, Center and front right. Why? And how can I solve this problem?
Thanks in advance
Hokerberg
You need Minnetonka SurCode SS DD 5.1 plugin for export of PrPro, to get DD 5.1 SS on your DVD in Encore. You have that?
If you don't have it, buy it (~ US$ 250) within PrPro, you will get a discount of the Adobe user above the price on the website.
As Jim points out, you need to export, so that you can encode with the SurCode encoder and then import them into Encore. I always use elementary streams, i.e. a video only and then an audio only 5.1 SS AC3 DD. Mux many files into one.
Good luck
Hunt
-
How can I burn a dvd with adobe first pro cc? I'm so irritated with Adobe to dry.
Ive been working with the old-school adobe elements 10 several years first, burn DVDs without problem.
I just got into Adobe Premiere Pro CC and I have no idea of how to burn a dvd? I watched as 10 videos youtube to understand how... but yet, still have not seemed to find a reasonable way?
Helpppp
We use Encore CS6 version to burn a DVD
-
Can't burn on a DVD + RW with DVD - ROM SD-R2102
Hello
I have a Satellite of 6000 Pro with XP. My cd - dvd drive is dvd - rom SD-R2102. I can read and burn CDs, I can read DVD & divxx but I can't burn it to a DVD + RW. Apparently, the cd is not recognized.Can someone help me?
Thank you
DamienHi guys
First of all @Ken Roots:
Why you suggest you have the same problem, but when I compare the two messages so I put t see similar problems!Now @castor:
In the manual, you should find the media (CD/DVD) that are compatible with your player.
I found some info on the SD-R2102 and it seems that this car doesn t support the DVD + RW!
http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=ISH_PRS&model=SDR2102&PTYPE=C OMBOSLWhy you n t check compatibility first! Sorry, but I don't understand the people who write about problems and finally there is no problem.
-
How can I write double DVD with my DVD UJ 820 burner?
Hello, I own a laptop satellite, and my problem is that she cannot write to double DVD, I think I should update the firmware but I can't find anything, recently I had the same problem with my desktop pc and to solve when I update the firmware of its own nec dvd burner Anyone know where I can find an update of the firmware or something to solve my problem?
Hi Chris
CD and DVD burning and playback with different readers are a never-ending story.
I use an external burner and believe me; I tested more than 10 different media from different manufacturers.
I could burn some media but not read and read but not burn :(
I think you should also test different DVD.In my manual, I found a list with the CD and DVD compatible. Eventually, you will also find the same list of supported media in the pre-installed user manual you.
-
iTunes
Why is it you can burn a cd of your itunes playlist and play in a car multimedia system
But you can't do the same thing with a USB flash drive
You can drag all the songs in the playlist on the flash drive and they can be read from here. You can't burn in the iTunes menu except for a CD or DVD drive.
-
I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator during its use, I can't find the project. How can I do? I made in IMOVIE I force see where and how I can save the project
I have an IMAC
Hey fradel,.
Looks like you need to export your movie, so you can burn it to a DVD using the DVD Creator Application. Back on how to do it.
Now I'm not sure what version of iMovie you use, but take a look at the links below for the steps to export the videos to your computer. Then you should be able to see those newly created files on your DVD Creator application.
This first link is for the latest version of iMovie and the following link is for the previous. If you have a different version of let me know.
iMovie (2013): export a QuickTime file
https://support.Apple.com/kb/PH14734iMovie 11: export your videos in a folder from the Finder
https://support.Apple.com/kb/PH2285Take care
-
How can I fix C00D199F error code when trying to burn a CD with Windows Media player.
Original title: How can I fix C00D199F error code
Error message when trying to burn a cd with Windows Media Player
Hello
1. what version of Windows Media Player do you use?
2. the specific issue of burning CD using WMP?
3. What is the exact full error message?
4. what you are trying to burn?
5. is the specific question on the disk?
Method 1: You can run the fixit available in the link below and
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox
Method 2: Clean the disc
Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.
Select a slower recording speed and check if that helps.
1. in the Tools menu, click Options, and then click the devices tab.
2. in devices, double-click the CD burner, and then click the recording tab.
3. in the write speed list, select a slower speed.Method 3:
Perform the clean boot and check:
http://support.Microsoft.com/kb/310353
Follow the above article.
If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.Reference: Burn your own custom CDs
Hope the above information is helpful.
-
can I burn bluray with my laptop?
Remember - this is a public forum so never post private information such as numbers of mail or telephone! I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help
You cannot burn Blu - Ray discs with a DVD burner. You will need to get an external Blu - ray drive, get a shop to buy a laptop with a blu - ray player or put a new Blu - ray player on your laptop.
-
Can't burn videos with creation of DVD on a DVD + RW disc
I have been regularly using the creation of Windows DVD for burning slide /videos. I had in the past burnt an a project with .jpg images in a collection of slides on a DVD + R disc. It plays perfectly on my drive Blueray. Recently, I tried to burn a backup copy of this project on a DVD + RW. However, he does not play on the computer, a standard disk drive or BD player. Players do not recognize the disc. I tried to erase the RW but it takes 15 to 20 minutes just to read the disc, the drive keeps light glisten constantly and says that the disc is erased but when I re - save the project, the result is the same as before.
I tried to reformat the drive. When I click with the right button on the drive and click on format it again takes forever and a training constant light flashing. The format window options are gray and do not respond to orders
Thanks for any idea as to what is happening and what I can do to fix the hang ups I get.I have been regularly using the creation of Windows DVD for burning slide /videos. I had in the past burnt an a project with .jpg images in a collection of slides on a DVD + R disc. It plays perfectly on my drive Blueray. Recently, I tried to burn a backup copy of this project on a DVD + RW. However, he does not play on the computer, a standard disk drive or BD player. Players do not recognize the disc. I tried to erase the RW but it takes 15 to 20 minutes just to read the disc, the drive keeps light glisten constantly and says that the disc is erased but when I re - save the project, the result is the same as before.
I tried to reformat the drive. When I click with the right button on the drive and click on format it again takes forever and a training constant light flashing. The format window options are gray and do not respond to orders
Thanks for any idea as to what is happening and what I can do to fix the hang ups I get.=====================================
It is possible that the DVD + RW rewritable is the problem.
Some hardware is not fully compatible with them.Personally, I did not have much success with DVD rewritable.
Verbatim DVD-R DVD have been reliable for me.When I need a copy of a home made DVD I create an ISO
Image file... so I can quickly burn as many copies as I need
without loss of time to re-encoding of the project for each
copy.First... just a suggestion... using a slow burn speed
produces a more reliable copy...The freeware ImgBurn can create an ISO Image
that allows to burn copies. Once you have the
image created... you can use it to burn as many copies
as you need.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Ignore most of the download buttons and click to the left of the
green circle with the white arrow... He says...
«Click here to download»Download ImgBurn:
http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
(The download is: SetupImgBurn_2.5.7.0.exe)(During the installation there will be an option to install
Shortcuts of UniBlue and the "Ask Toolbar"... you can
you want to deselect those)The following tutorials may be worth a visit:
How to create an image file of a disc with ImgBurn
http://Forum.ImgBurn.com/index.php?showtopic=6379How to write an image file to a disc with ImgBurn
http://Forum.ImgBurn.com/index.php?showtopic=61Good luck...
-
can I burn a bly - ray in a folder like I can with a DVD?
Pre10, win7 64
can I burn a blu - ray to a foleder as I do with a DVD so that once it is fully coded I can burn bly - ray dics of the file in the folder, rather than having to encode them again what me same time can.
I coded a project as a file m2t to 1920 x 1440 and registered, but my burning program wouldn't recognize it (Roxio Creator 2010) as it acknowledges the Video_TS files.
Thank you
I think it must be version 5 to manage Blu - Ray.
See you soon,.
--
Neale
Insanity is hereditary, get you your children
Maybe you are looking for
-
I disabled the pop-up blocking but FF has decided that he is very intelligent and has begun blocking the windows generated by my script - after about 100/200 pop ups.
-
It happens in Word, Adobe, IE, Chrome. I tried to turn off DEP for these prgrams, no luck. I am running XP with SP3.
-
I need an usb winxp driver for my iphone4 ios5
I have an old desktop running windows xp. He often has trouble with the usb. In this case I need a driver for my ios5 iphone 4 Can someone point me in the right direction. I already tried apple support and windows supports. All I get on the internet
-
All messages in windows rebooted PC lost?
Catastrophic failure of hard drive, rebooted but have lost all my old windows mail, address, records, etc, can I get them back? and how? I had to set up windows mail from scratch after reboot... empty boxes? Cheers, coolforgot666
-
Possible to run an installation of LWAPP small on a dish network?
Hello As stated in the subject, is it possible to have the management for a 2006 controller network, be the same as the client network linking to, or do need to be on different networks? Thank you.