Can I change after publication
I'm new on using Captivate and has just published my first film. I want to change even more, but I don't see the link to the film and not the file.Hi again TracieTX
I don't know what to tell you. You may simply recreate the film. Unfortunately, it is not simply a way to take a published movie and "decompile" it or otherwise convert it back into the source. CP file format.
I hope you already know this. But I'll throw it out there just in case. When you work with a Captivate project, this project is stored in a file with a file extension. CP. This is the file that must remain on your local hard drive. You produce a movie from the. CP file. The film is in any event. SWF (with additional. HTM file) or in. EXE format. They are produced from the project source folder.
The only way I can really not understand your project source folder disappears from the list of recent films is if you had may be renamed or moved.
You can search the places where you were working at the research of *. CP files.
Sorry there is no better press. Rick
Tags: Adobe Captivate
Similar Questions
-
How exam VCP can be changed after releasing the vSphere 5.1?
Hi all
I am preparing to review the VCP of vSphere 5.0, and now vSphere 5.1 came out, so I have a few questions on the possible evolution of the review of the VCP in near future:
-Do you know or can you guess when the knowledge/skills based on vSphere 5.1 will be tested on the exam?
-Exam based on vSphere 5.1 will be a separate with its own code review, or the current review of the VCP5 is updated to include the content of vSphere 5.1?
-If the VCP5.1 exam (based on vSphere 5.1) will be a separate consideration, it will replace the current VCP 5.0 review? or the two exams for vSphere 5.0 and 5.1 coexist at the same time?
I have invested in current VCP5 exam, so I just want to know if I take VCP5 review the earlier to avoid the review update/update/change? or don't have to hurry because vSphere 5.1 will not affect the current review of the VCP5?
Thank you very much for the advice,
Minh
This question comes up every time VMware a minor version of vSphere, and the answer is that PCV tests are independent of minor versions. VCP510 is the exam for VCP for vSphere 5, not 5.0 or 5.1.
The certification team go through each of the questions in the pool for the review and ensure that each item is valid for all minor versions. Unless VMware publishes a new examination plan that specifically call 5.1, you can continue your preparations you are today.
-
an answer file can be changed after it has been created?
What is the name of the answer file after it has been created?
If you mean an for an unattended Setup answer file, you must ask your question in ITPRO TechNet for Windows Vista.
Please click on the link below:
http://social.technet.Microsoft.com/forums/en/itprovistadeployment/threadsThey would be better able to solve your problem.
Sincerely,
Marilyn
-
Help! All icons on the desktop has changed after downloading a program! __
I downloaded a program and just suddenly all my desktop icons changed to the program's icon. I can't change after reboot, or try to change each one individually through the Properties tab. Don't know how to get back them. Any ideas? Thank you
Hello
Restore the. File associations LNK using the 1st link here and others as needed.
Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.htmlHow to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlHow to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.htmlHow Unassociate a Type of Extension file in Vista and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlRestore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Width of brush to change after the fact
Hello
I painted some executives and the brush was too thick. How can I change all the brush stroke widths in a single frame?
Best
The only way to do it with a brush must resize art to the smallest, and the line of brush will be thin. You can do this by selecting this:
And then dragging drag Grey Ribbon to the last image and click on all the frames, then resize.
Then you can increase the size of the dimension of the screen that will essentially do what you ask, although there is a workaround at best. Unfortunately, that's close enough as only pencil of lines can be changed after the fact.
-
Embedded swf file does not work after publication
I've created a conference slides with embedded swf flashed that is created with AS3 including animation. It works well within Powerpoint, butitdoen can't work after publication and running with the web browser. My version of powerpoint is 2007 and Adobe presenter is 7.07. I already find offers research, but I can't find one.
I thank Jacky. I found the main problem not turn when a flash in Adobe Presenter incorporation, it's that the main class must be inherited from the MovieClip, Sprite not as I created it before. Now it works perfectly for flash versions created from both Adobe Flash Pro. CS5.5 (11) and CS4 (10).
-
The background behind my toolbars and tabs at the top of the screen was grey, but now after the update of firefox, is black (or maybe clear, because my desktop icons appear like ghostly blurs). How can I change to gray?
See:
Right-click in the free space on your desktop.
Left click on personalization.
There are four options in Windows 7 at the bottom of the screen, select 'window color and appearance '.
Select a border color
Uncheck the box: "enable transparency". -
NB550D-111 - can't change the display resolution after installing Win7 Pro
Hi guys,.
After you install a clean install of Windows 7 Professional I can't get resolution, more than 800 x 600.
I went to the section of the driver and installed the good display driver for my NB550D-111: version 8.812.2.2 of the displaydriver.After a reboot, still nothing happens and I can't change the resolution.
Trying to open the Catalyst Control Center results in nothing: I can't seem to open it.I spent hours and hours trying to solve this problem, but need help at the moment.
See you soon,.
Tim
NB550D-111 has AMD HD graphics card 6250 and the same Satellite C660D (PSC1YE) or Satellite L775D (PSK5PE) then you can try using the display drivers for these laptops.
I n t have experience with NBs and cannot confirm this will help, but you can try it and send feedback.
-
Satellite L750 PSK1WA: Can I change from 32-bit to 64-bit after initial installation?
I chose 32-bit during my first installation after buying my L750 PSK1WA-03C00R with i5 2410 M CPU.
Can I change to 64 bit so that I can access the 8 GB of RAM that has been installed.Thank you.
Hhmmm I think that this should be possible. You have to start the process of recovery once more
Check this Toshiba HowTo: how to do a system recovery
http://www.MyToshiba.com.au/support/items/FAQ/711 press and hold the power button for ten (10) seconds to turn off your device.
2 press and hold the 0 (zero) on the top of the keyboard (not the zero on the numeric keypad key) and at the same time, press the button power once to turn on your laptop.
3. when the Toshiba screen appears; release the 0 key.
* 4. If you are prompted to select 32-bit or 64-bit operating system; Click on suivant.*
5. When you are prompted by the warning screen; Click Yes to continue the system recovery.
6. Select recovery of factory default software; Click Next.
7. Select Restore to out-of-box state. Click Next again.
8 Please read and acknowledge this last warning screen
9. click on next to start RecoveryThis could also be useful if you're wondering why you didn't receive the disc:
http://www.MyToshiba.co.nz/support/items/FAQ/69 -
After that windows update I can't change my picture to acount.
Hello Sir,
I'm Lenora, I use hp15-d017tu laptop. It comes with free back but I install it on windows 8 pro. Yesterday, I update my windows after windows update, I can't change my startup screen, acount picture and screen lock, which mean all the pwrsonalize does not work as I can't install any software of windows store.
So, please help me sir.
Thank you.
Hi @pritamkabiraj_1,.
Thank you for your inquiry, I am happy to help you!
I understand that your laptop came with Free back and that you have installed Windows 8 pro yesterday. You cannot change your account picture, the background or the screen saver. You can't customize your windows. Also, you cannot install the software of the Windows store.
Can you download from the store Windows and install simply not?
Have you activated your Windows 8, if not, you will need to do this first.
Here are two links to microsoft forum answers that can help.
Impossible to change the wallpaper of windows 8.
Impossible to customize Windows 8
With Windows 8, you now have an option to refresh your PC to solve problems (Windows 8).
Troubleshooting using automated (Windows 8)
If you installed from a copy retail of Windows, you must also be supported by MIcrosoft. You can consider to contact them for assistance. Microsoft Support contact us
I hope this helps and good luck!
-
When I m I look at an image or another document, after a time (short term) the screen go to the home page, how can I change the time if I don't have this problem
Hi, Romulo,
This question should be validated in the Internet Explorer Forum. Note the drop-down menus.
http://answers.Microsoft.com/en-us/IE/Forum
What sites you encounter the problem with?
Make sure flash player is the current version
http://www.Adobe.com/software/Flash/about/
Check Shockwave player is the current version
http://www.Adobe.com/Shockwave/welcome/
Check the Java version
http://Java.com/en/download/installed.jsp
You check the internet connection
If you are experiencing network connectivity problems in Internet Explorer, the first thing to do is to make sure that all cables are connected. Then open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair (if you use Windows Vista) or solve problems (if you use Windows 7).
If the problem persists, see the following articles:
-
I have exactly the same problem in Windows Vista Ultimate Edition. I can delete, change and move all other profiles wireless network but one that reappears immediately after that I erase it.
I see that you asked initially that this issue in 2010. Has there every been a resolution?ElliottMy Eureka has been using netsh, explains Superuser.com «How to completely remove a wireless network from Vista» Everything I found on the Microsoft site doesn't give any examples on how to find profiles (netsh wlan name) or the statement appropriate to remove this profile (netsh wlan dlete name = "the name exactly as shown, case-sensitive quotes". That he solved it for me.
-
Original title: Windows Movie Maker
In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?
Hi Ashley44,
You can use the trim function in Windows Movie Maker to change the duration of the film. See the link below for the steps
If you want more advanced features, you can use Windows Live Movie Maker
http://explore.live.com/Windows-Live-Movie-Maker-stunning-in-seconds?OS=other
-
I can't change the resolution of my screen and the brightness of the screen after I upgraded the Windows of windows 7 ultimate for windows pro 8.1 build 9600
I have already installed the graphics card, but I can't change my resolution of more than 1024 x 768
My laptop is HP 431 with processor intel core i3 - 2310 m 2.10 GHz, AMD graphics 7450 M DDR3 1 GB HD (I don't know why, but I have already installed graphics AMD HD series 7400 M because my laptop is not compatible with the other AMD graphics), 64-bit OS
I think that's the problem
http://prntscr.com/3mf9l5
What do you think guys?Please, help me
Thank you
I'm sorry that this driver has not worked.
The pilot I posted should be only for laptops with the series 7 Intel chipsets.
I guess W8.1 is not in charge of your model.
You can see if this W8 driver works, but I think that nothing is going to work for this model.
-
The display on my Pavilion g6 shuts down after 60 seconds, how can I change this?
Help, please!
In the Power Options found in Control Panel under system and security.
Maybe you are looking for
-
Toshiba 42L6453D is blacking out for 1 second interval every minute
I have problems with my Toshiba 42L6453D TV new blacking out [Picture & Sound] channels not HD for 1 second interval every minute or so - HD channels are functioning properly. I tried to re-tuning many times, but on some channels this question just k
-
I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data. All directions? TIA Doc
-
C4780: username and password for administration
My printer is already set up. When I go to his Web page at the 192.168.1.107 there need a user name and password. Can anyone help? I really don't want to reset it or configure the printer again, it took me long enough!
-
my printer has a scrolling through message "remove and check cartridge" and won't do anything. If anyone can help?
-
I did system restore recently to avoid some problems with internet connectivity. Since then, when I click on help and support I get a error message "" windows cannot find ' help ctr.exe. "" Make sure you typed the name correctly and then try again. T