Can I connect my Mac Mini 2011 my end of 2014 Mac Mini using Thunderbold cable to double the RAM?

Similar Questions

• I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  You should be able to, given the Mac Mini has the correct connections (in this case, a Thunderbolt connection).

  Use your iMac as a display with the target - Apple Support Display Mode

• can I connect a mac mini to my 2008 iMac

  can I connect a mac mini to my 2008 iMac

  Yes, via your local network and sharing in sharing preferences.

  Basics - Mac file sharing

  Mac 101 - File sharing

• can I connect a mac mini to existing imac?

  I have an iMac with a perfectly fine display 10.4, but I'm not able to upgrade more. I wonder if I can connect a mac mini and upgrade using my keyboard and screen of the iMac.

  Hi readingteacher,.

  Thank you for using communities Support from Apple. I understand that you want to use your older iMac as a display of your Mac Mini. I am pleased to provide you with some information about this process.

  This article has some good information on what is needed to turn your iMac in a view:

  Use your iMac as a display with the target Display Mode

  As you can see, it takes an iMac compatible with 10.6.1 or later. Since your iMac seems to be a G5 with 10.4.8, I'm afraid that it is not compatible with this feature.

  I hope this helps clear of the things up. See you soon!

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Connecting a Mac to a PC monitor - configuration double monitor

  Hello

  My problem is that I tried to connect a Mac monitor to my computer Dell laptop that runs Windows 7. I bought the Mac PC Maplin (female DVI to 15 pin VGA) male adapter and everything is connected to the top. But I can't do anything to appear on the screen of the Mac. I was able to move the pieces of my software music off the screen, but then they do not appear on the screen of the Mac. In fact, it's hard to say that if the monitor is, the white light is on but the screen doesn't flicker or change to a black screen empty. I tried to use both replication and extending to the screen in the display settings on my computer laptop but nothing helps. Could someone please explain to me how to put in place and may be the problem?

  Thank you

  Liam

  If the monitor will accept a digital connection you! need to connect to, a digital output on your laptop. -All versions - DVI or HDMI with a HDMI to DVI adapter.

  If your laptop has only one VGA output there are converters, but a simple adapter will not convert the analog VGA output to digital. See http://superuser.com/questions/133707/how-can-i-connect-a-dvi-monitor-to-the-vga-port-in-my-laptop .

• How can I connect name BT IDS of devices in a log file by using the Toshiba BT stack

  Hello

  without Microsoft stack, I can't use a lot of freeware programs (BluetoothView.exe, BluetoothCL.exe, BTScanner for Windows), to 'catch up' bluetooth devices in a log file.

  How can I connect names bt ID/description of the devices in a logfile using the Toshiba Bluetooth stack?

  Thank you

  I don't know if there's a tool for that. However, it should be possible with some Bluetooth SDK controls.

• How can I connect my Mac Mini to my TV?

  I would like to connect my older Mac Mini to one of the ports on My HDTV so that I can use the TV as a screen.    Is this possible?  If so, what type of wire do I need? If anyone knows what means all and can tell me what I need to plug it, please let me know that the TV has multiple ports HDMI input that I can use.

  Thank you

  I looked up the Mini online via its serial number to get some specs on this but do not know what they mean.   Here are some details:

  Apple Mac mini "Core 2 Duo" 2.53 (end 2009) care

  Identifiers: Late 2009 - MC239LL/A - Macmini3, 1 - A1283 - 2336

  Connectivity includes Mini-DVI and Mini DisplayPort, a Firewire port "800", five USB 2.0 ports, combined "digital audio optical and audio line in" and combined mini-prises ' audio optical digital output / helmet ", a 10/100/1000Base-T Gigabit Ethernet port and integrated AirPort Extreme (802.11a/b/g/n) and Bluetooth 2.1 + EDR.

  1 mini-DVI and Mini DisplayPort 1.    Details:

  Supports simultaneous dual display - 1920 x 1200 on a screen DVI or VGA using the Mini-DVI port and 2560 x 1600 on a DVI display double bond using the Mini DisplayPort (with a Mini DisplayPort to Dual-Link DVI adapter option). Includes a Mini-DVI to DVI.

  !

  Get a mini displayport > adopting HDMI

  On Mini DisplayPort / HDMI - Apple Support adapters

  Note If you want to audio of the TV, you need an adopter as this audio passage

  ter-with-USB-Audio https://www.startech.com/AV/Displayport-Converters/Mini-DisplayPort-to-HDMI-Adap ~ MDP2HDMIUSBA https://support.Apple.com/en-us/HT202079

• Can't connect to mac without password

  Hi - I have to connect my macbook pro retina with a password (never had to do it before). FileVault is turned on no. Changed the password and tried but still request the password after a reboot. Makes me crazy. All online solutions have not helped so far. Help, please!

  Thank you

  A

  Hi aspooner,

  How many times can restart you? Just let him sleep and uncheck password required after the onset of sleep or screen saver.

  Change your password "". ""

  Better yet just get used to having a bit of security, if your computer is lost or stolen or accessed by rascals.

  Quinn

• I can not connect windows 7 to an old Canon BJC 250 (have USB to parallel cable. conv)

  I have a Canon BJC 250 printer connected to the USB port ieee. Its a printer Workhouse. Never had a paper jam all these years. (1996), I found ink cart. to do this in a thrief store. I can't seem to part with them. His semple to operate and works better than my Dell 725 and the Epson conbo. I would like to know if there is conpatable with Windows 7. I can't install the driver of this OS. If anything can work with other pilots from cannon. Notes; I still have the installation CD. but it will not be installed.

  If you go to the website of Canon in the following link, it shows as the latest drivers for XP.  In addition, if you click on "Service and support" at this link and then search for "Windows 7", you will find a document that lists the BJC series printers that are supported for Windows 7 and the 250 is not on this list. "  Here is the link to Canon: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/bjc_series/bjc_250_series#ServiceAndSupport
  I thought that maybe the BJC-240 which is support could be close enough, but based on what follows, where the user asking the question said he tried this driver, apparently we don't: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/canon-bubble-jet-bjc-250-printer/d27af8d2-a770-e011-8dfc-68b599b31bf5

• I CAN'T CONNECT TO MY SUBSCRIPTION TO CREATE PDF ONLINE.  I NEED IT TODAY. WHAT IS THE PROBLEM PLEASE?

  My subscription does not work today.  I don't know why; and I can't find any technical or account support.  What should I do?

  Hi mm7744,

  I am able to connect.

  If please check using another browser and connect you to: https://cloud.acrobat.com/convertpdf

  Kind regards

  Rave

• Can't do a TV picture on my HP 2006 Media edition by using my cable coaxial antenna, I split the signal out that works well with ordinary TV

  I am in a rural area of the United States and have an antenna connected to a digital box with a signal strength of 73% to my regular TV on which I get 16 channels.  The radio works fine in the Media center, but I can't get the TV stations.  I have divided the coaxial antenna power and connected it to the coaxial video on the back of the CPU.  I have a 64 x 2 dual core AMD Athlon {tm} processor 4200 +.   When I get to the media center TV auto configuration screen in place it scans and said then not detected no TV signal.  If I configure manually using antenna and then go to the screen "digital land" and hit next, the program stops working and although it shows it running in the Task Manager it will not give more. I guess that's because it detects no signal from the antenna.  I'm stumped and would apprectiate all opinion.  Finally, I would like to power TV live stream to my regular TV of the CPU, but going to cross this bridge after receiving a signal from TV to the CPU.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://experts.Windows.com/f/

  It will be useful.

• Reformat a HP Mini using recovery.exe executable from the spare partition

  Hello people.

  I tried saving the little laptop of HP a good friend but it seems we cannot install anything that the person she bought second hand is the only administrator with administrator privileges and I don't know enough about windows 7 in an attempt to fix the registry. This person is not available, and so we cannot recover this data.

  I want to completely reformat the HD in there, as I would with my old XP (delete all partitions and start again) machines.

  Unfortunately, there is no optical drive in this thing, and there seems to be a separate partition with 'recovery.exe"listed arising therefrom. I guess that this allows a user to do something of a recovery for the installation of the system.

  My question is really - can I use this executable partitioned recovery in order to * completely * reformat the partition more great beside her and reinstall Windows 7 from him as well? The Mini came with no other media, and I can't find any form of Installer for Windows 7 'Starter', which apparently is the BONE that comes pre-installed on these machines. I am very wary of barging in to an installation of an operating system I know little and HP themselves so far aren't really help me by phone or e-mail. Also, the system is out of warranty, that is kind of a guy.

  If none of this information is reasonably clearly set out somewhere on the HP Web site, I'd appreciate a link thereto, or if anyone knows could offer advice on recommended when here that would be more useful.

  Thank you very much!

  I found information on the CTO of mini 210-4000

  Try to restore it as in the following image. Who should get the mini to its original operating system.

  

• Can not connect to Windows 8 on a computer that cannot connect to the internet

  Hello. I have a complex version of a common problem. I can't connect to Windows 8 on a computer that I've not used within six months. The following conditions apply.

  1. I forgot the password which was used last on this computer to turn off the line connection
  2. unable to get the computer online because the only modern it might connect to a fried.

  3. it is a Vaio Duo and has no Ethernet port.

  4. I don't care about the data, so don't mind wiping clean but I don't want to pay for the office. Computer has no hard drive, so I can't restore the BONES of the disks.

  What would you suggest here?

  Thanks for any help

  Hello

  Please provide an opportunity to help Microsoft Community.

  If you do not remember the password, you can try to reset the password online. You can use Internet Explorer to reset the password for the Microsoft Account.

  Open Internet Explorer on another computer, and then try to reset the Microsoft Account password by following the steps in the link below.

  Forgotten password and other connection problems

  As mentioned you use computer Vaio Duo which I checked comes pre-installed with Windows 8.

  If the Windows operating system comes pre-installed on the laptop, then you will need to contact the manufacturer of the system for the installation media that allows you to update or reset the settings of the computer.

  Of the manufacturer of the system provides a built in utility to repair the operating system which is known as system recovery partition, I ask you to contact you the Sony Support for more information on how to refresh/reset the settings of the computer.

  Please visit the link provided below for support from Sony:

  http://www.Sony.co.UK/support/en/product/SVD1322Y9E

  Hope that the information provided is useful. We know the results.

• How can I connect mac pro to a projector VGA port

  How can I connect my mac pro book to a projector with a VGA port

  should be pretty simple.  Acorrding to Apple, you have a Thunderbolt port video that supports MiniDisplayPort, so you would need a MiniDP to VGA, then a VGA cable, and then turn on the mirror in the display preferences, under the Big Apple icon at the top left of your screen, then go to System Preferences and there you go.

  John B