Can I copy the text but not change (it is not secure)

Similar Questions

• Unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?

  I am unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?

  All security settings seem fine, an idea?

  Some messages do not conform to the standards of the Internet in the sense that they cannot be returned intact by their transmission.  The way around this is to use Message | Until the attachment, then they will be properly transmitted, since they will be attached.

  Steve

• Computer will display the text but not the graphics

  I have a computer that is running Windows 7 Pro 64 bit that will display the text, but will not be graphic print (what I get is several pages of garbled text and what looks like Morse code).

  The problem is the same with a HP Officejet Pro 6230 or an Officejet Pro 8100.

  The problem occurs if I am connected with a domain users account or the local administrator account.

  The problem occurs using the re-discovery of HP network port monitor or the standard TCP/IP port.

  Two other computers connected to the printer and also running Windows 7 Pro 64 bit, you do not have the problem.

  HP printing and doctor Scan didn't find any problem and is not the problem of printer Microsoft Fixit fix anything.

  I will try to assign another driver by following the instructions at:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/how-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  but I do not know what driver to use.

  This Technet article:

  http://blogs.technet.com/b/perfguru/archive/2008/08/06/print-spooler-crash-troubleshooting-steps.aspx

  suggests that a third-party port monitor may be to blame. I tried to remove the rediscovery of HP Network Monitor, but I get an error and I can't remove it. As far as I can tell, this is the third port only installed on the computer monitor.

  I have searched this forum, but could not find a similar problem that has a solution.

  What other information should I provide?

  Thank you!

  Jeffrey Pike

  Groton public library

  ELSA:

  Further investigation of this issue today, I learned that probably, printing problems don't were not due to the computer or printer, but a bad pass that the computer is plugged into. I ordered a new switch, and I hope that it will be the end of my troubles. Thank you for the help that is available to you.

  Jeffrey Pike

  Groton public library

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• inbrowser editing can change the text but cannot change a photo... need help... Please

  I'm new to inbrowser edition... but if I want to change a photo is forever and nothing happening... no problem with the text

  Please use the feedback inside the inbrowser.editing.com admin page to report the problem to the development team. Try to include as much information as possible about your Setup program (file .muse, URL of the site, browser, OS, etc.)

  Thank you!

  -Justin

• Droid: you can remove part of the thread of the text, but not ALL?

  I would like to save one or more of the messages in a thread but quickly... text in time... the rest in this thread.  I know I can delte message by message, but I can highlight several texts & delete them all at once?

  I don't think you can do it with the stock in the messaging application.  You can, however, do it with a third-party application.  If you install Handcent SMS, it's pretty easy:

  -Open the thread (in Handcent SMS, no enforcement stock)

  -Press the settings button, and then press "More".

  -Press on "Batch Mode".

  -Check the box to the right of each message that you want to remove

  -Press the settings button, and then press "Delete selected".

  -On the confirmation prompt, select "Delete" (as an option, you can select the checkbox 'Delete locked messages' before you press "Delete" if all messages are locked)

  Handcent SMS is a free application available on Android Market.  I hope that's what you're looking for!

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• OfficeJet Pro 8600 N911a: Can print / copy in colour, but not black

  Last night, tried to make a copy of the Officejet directly black and got a page of black streaks almost completely dark.  Tried to copy the same document in color and got a nice copy.

  Today, I tried scanning a document from hp on my computer software.  Got the same streaks.  Scanned in color and got a good clear scan.

  It may be dirt on the glass which would affect color and black too, right?

  Grayscale printing is fine.

  How can I solve the problem?

  No worries on forget everything shuts off and turns back on.

  I saw the power of the printer and the new solve a lot of problems, but it's the first time I've seen do so solve the problem with black streaks.

  One thing that I would check if it happens again is to make sure that the printer is plugged directly into a wall outlet, not a surge protector. Copy and scan functions can behave a bit strange if the printer does not have enough power.

  I'm glad that you all fixed. If you need anything else please let me know, otherwise have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• In the toolbar, I can only see the icons, but not the description. After clicking on the icons, I still can't do anything with it.

  I have Adobe Acrobat X Standard. I used it for a long time. Since last night's speech, I can't use the tools to edit or modify any pdf file.

  I have Windows 7, Acrobat 10.1.16.13.

  After a new file, first open the tool window to the right isn't here so I have to open it manually. I'm going to display - tools - and then any option. After that, I can see the tools on the right section, but no description... just like the image below.

  Even if I click on any icon, no action will happen. As example, I moved the typewriter as a QuickTool and still it does not work.

  Any suggestion?

  

  Hi angelmdz,

  Please follow the steps in the below article mentioned.

  Boxes of empty dialogue or missing text from GUI

  Thank you

  Abhishek

• can connect to the network but not internet XP

  I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

  First course of action:

  1. turn off the PC.

  2. turn off the router.

  3. turn on the router.

  4. turn on the PC.

• I can connect to the internet, but not to my home network

  I have a PC running Windows XP SP3, which is connected to a Linksys WRT300N router. I have access to the internet. I can not connect to my home network; don't know what happened. all (3) computers are set to the same workgroup name. I can't find anywhere in the network settings for WinXP that relates my network name. Help!

  Thanks for any help you can provide.

  John

  I guess that the other two computers are working properly and that it can network together and that the only problem is the XP machine.  I'm also assuming that this problem persists when the firewall was disabled (including hidden like the one in the Cisco VPN client).  I also assume you mean by "is no longer connect to my home network" that you can't see other computers in your network neighborhood. See if this article helps you:

  "You can't see the other computers in the workgroup on the network on a Windows XP computer"
    <>http://support.Microsoft.com/kb/903267 >

  If this does not help, try to walk your way through the following:
  "How to troubleshoot network domestic in Windows XP"
    <>http://support.Microsoft.com/kb/308007 >

  HTH,
  JW

• Why don't I veiw my pictures can't. shows the files but not photo

  My computer shows the files on the screen, but you must click on each photo to see. Never had to do before.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• When I hover over the links in Mode safe, I can get a preview of the text, but not in Normal startup - what could be the cause of the problem?

  For example, in the forums, I used to be able to see the first line or so of text by placing the cursor on the link - on a new computer, I can't. I don't know if this is a setting on the latest version of Firefox (installed on the new machine), but when I start mode safe mode it shows me the preview. Any advice would be appreciated.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Can connect to the network, but not the internet, a "Local" access only

  Just installed a new router and am now unable to connect to internet on my HP laptop. The laptop is running Windows Vista 64-bit Service pack 1. Pulling him diagnose & repair window returns a message indicating "your modem or router is not available.

  I tried several things to get the internet to connect. I have reinstalled the driver, turned off the firewall, disabled the Internet Version 6 (TCP/IPv6) Protocol and manually configure the network connection.

  I have a desktop computer with a wireless adapater that performs the exact same OS as the laptop and I have no problem with this connection.

  I am able to connect to the internet if I connect the laptop to the ethernet cable. I am completely confused and would appreciate any advice!

  Hi Ima be,

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• You can just sync the bookmarks but not the bookmarks bar?

  I would like to have toolbars two separate bookmark, one for work and one for home. I would so all the rest of my favorites to sync in addition to the toolbar. Is this possible? Thank you!

  Unfortunately at this point it has no option to synchronize just a Sub set op bookmarks. It's all or nothing.

  In all cases, the comments are valuable and we know, that it is a very requested feature.