I can connect to the internet, but not to my home network

Similar Questions

• Able to connect to the Internet, but not be able to access router settings

  I can connect to the Internet fine, ping works, but I can't connect to the router settings.

  Specifications

  • Router IP: 192.168.1.1
  • IP address: 192.168.1.150 USING static IP
  • Browser: Safari
  • Error message: Safari cannot open the page because the server dropped the connection unexpectedly.
  • If you need a card, leave a reply!

  Hey Harpo1! Try to access the configuration page using a computer connected to the router. If it does not connect to the page, reboot the router and use a different web browser could help. You can also try to temporarily unplug the modem and see if you can access it.

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• I can connect to the internet, but sometimes the message "You are not connected to internet", then after a second or two, it connects

  Just bought new HP with Windows 8 desktop computer, and it connects to the internet through a wired connection.  However, sometimes when you try to connect, the message "you are not connected to a network rises, then it usually connects."  This message also may appear when trying to back up a new web page.

  Disabled the antivrus, no change.  Plugged a laptop using the same modem and connections with no problems at all, so there seems to be something specific with this new desktop computer.

  Any suggestions on how to stop this sporadic message appear?

  Hello Andrea,

  A large number of variables are involved when you connect to a network: cables, drivers, network adapters and routers. Some common problems are:

  • A switch to wireless network adapter is disabled

  • Airplane mode is on

  • Poorly connected or disconnected cables

  • Wireless standards do not match

  • Missing updates

  • Incorrect network connection settings

  • Damaged or incompatible drivers

  • Hardware or software problems

  Perform the steps from the link below and see if the error Stops appearing.

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-a-network

  Answer please if you have any questions.

• Connected to the internet, but not connected network magic shows

  My network is connect to the internet, both wired and wireless. On the compputer connected by magic cable network shows not connected, but I am connected. Unable to print remotely. Router shows connected but the network card is not.

  Thank you

  After reading your response, I decided to uninstall and reinstall the program. Thought it would be a little easier. I felt that the problenm was that the program had been damaged but hesitate to reinstall it because I downloaded from the internet several years ago and could not find the product key.  I finally found the program cisco and the location of the key and now works. Not as sexy but effective.

  Thank you once again

• I can connect to the internet, but cannot stay connected to thn over 10 to 15 minutes.

  After I changed my MiFi for a Verizon 890 L 4 G LTE Verizon internet access I can access the internet for about 10 to 15 minutes. He stops abruptly, but when looking at the network and sharing Center to watch I am always connected. When I run the troubleshooting it says that there is no problem. When I look in the detail section of the troubleshooting it is said that there may be a problem, but there is no additional information available. The thing really strange is that my wife and I have exactly the same computers and the OS and his computer has no problem to stay connected. I found a update for my card driver and it made no difference. I am at a loss now other solutions. I also put the hotspot in WPS mode hoping it would reconfigure the communication between it and my laptop, it made no difference. Help please.

  Hi kodibear333.
   
  
  Thanks for posting your query in Microsoft Community.
   
  I understand from your description, that you have a problem with connecting to the Internet.
   
  Could you please answer the following questions so that I can help you better.
   
  
  1. don't you get an error message when you are disconnected from the internet?
  2 have you made changes on the computer before this problem?
   
  
  I want you to try the following methods to resolve the problem.
  Method 1: Network connectivity problems
  Check out the link and follow the steps in the link.
  http://support.Microsoft.com/kb/936211#appliesTo
   
  Method 2: Wi - Fi and network problems.
   
  See the link and the steps mentioned in the link.
  http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1.
  Get back to us and let me know the status of the question so that I can fix it as soon as possible.

• I can connect to the Internet, but shortly after, I can't do anything online.

  IM using a zone reactive Verizon MIFI to connect to internet. After having connected and go to a few pages, my computer says im always connected however, I can not anywhere. I get the message that this page cannot be displayed. When I turn the exact box even the provider of my mother on it works great every time. IM in a 3G area, so I wonder if it has something to do with my settings on the computer. IM using a Toshiba laptop equipped with Windows 7.

  Hi Mandy_Kirk,

  ·         Did you do changes on the computer before the show?

  ·         What web browser do you use?

  ·         The problem occurs with any particular Web site?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Why can't I connect to the Internet?

  If you are using Internet Explorer, follow the steps in the article.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  For reference: Wired and wireless in Windows network connection problems

• Windows Vista computer connects to the internet, but not ping to auto DHCP name

  Trying to get my Vista machine to have the file and printer sharing, I can see attached machines, and they can see the Vista machine, but does not connect to the computer.  The Vista machine will not see public folders with error code: 0 x 80070035 the network path was not found.

  Ping the DHCP name provides:

  Main2 ping [fe80::12:f74:b94e:94fb 8%] of 8% with 32 fe80::12:f74:b94e:94fb
  YTES of data:
  General failure.
  General failure.
  General failure.
  General failure.

  Ping statistics for fe80::12:f74:b94e:94fb 8%:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss),

  Ipconfig/all

  Windows IP configuration

  Name of the host...: Main2
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Belkin Wireless G Desktop Card
  Physical address.... : 00-11-50-D6-32-97
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e497:9802:e6a6:40ce % 10 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Tuesday, October 21, 2008 23:06:50
  End of the lease...: Thursday, October 23, 2008 11:06:50
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e50:12:f74:b94e:94fb (area
  ED)
  Address IPv6 local link...: fe80::12:f74:b94e:94fb %8 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {E71A931D-A587-49DD-BF49-209236344
  523}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help?

  
  

• I am connected to a wireless network. I connect to the Internet, but not for the world wide web. How doe to fix? the message I get is cannot find server

  I have and you are using a router D-Link 601. I connect with a desktop computer and 1 another laptop. The laptop which does not connect on the web is an older Compact. I always use Internet Explorer 6.0.2900.xpsp_sp3.101209 - 16471C. Previously, I had dial-up and no problelms.

  Hello

  This helps remove all connection settings information that computers in Internet Explorer?

  Kind regards

  Hans

• I have windows xp and that you can connect to the internet, but my wireless network icon is missing, what should I do?

  Just got a new router, now the icons for wireless internet are gone... What should I do to get back them?

  Hello MMniser,

  Try this:
  1. go in Control Panel - network connections has been classic or network connections and Internet - network connections has been category;
  2. right click on your wireless connection, which is connected and click Properties;
  3. check the option "Show icon in notification area when connected" and Ok.

  Good luck!

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• I can't load ios9.3. I get a message that I am not connected to the Internet, but I check and I am connected.

  I can't load ios9.3. I get a message that I am not connected to the Internet, but I check and I am connected.

  Apple pulled 9.3 for some devices due to problems.

  Just wait and try to come back later.

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html