can I have both versions installed and switch between the two

Similar Questions

• Switch between the two alternative provisions (both in portrait mode)

  I have created two alternative facilities for the purpose of these two being in portrait orientation, as they are to view the same article in two different languages. Is there a way to switch between the two using the navto: / / action or by using bookmarks and by using the go to destination. I tried both but I was wondering if there was something there.

  I have a publication ideally appearing in both languages, though being a main language and the seconary being there only for reference. I'm not wanting to produce two folios and use the filter region with Apple, as have the secondary language, as a reference is a selling point for the publication. Also using"States" would be more complicated.

  He must choose between non-ideal solutions, as a magical sticky toggle 'use this language' is not available.

  If you do mind ' t using the rocker on each page, then navto would be OK. and each page of the reference language should have a back button go. All reference pages that can be marketed after the main pages, and each of them can be hidden from OCD.

  If you opt for parity between languages, then you could start the app with no menu-swipable selection page, where you can decide what language to use. At the end of these two sections, another non-swipable page would give you the choice to read another language. The trick of no-swipable page gives users a feeling of an application of the only language of his choice.

  And I would use diapers, not another layout for the production. Seems to be a cleaner solution for me.

• Switch between the two button symbols

  Hello

  I'm new to AS, but not new to programming.  I'm using Flash CS4.  Here's what I'm trying to do.

  I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of the slideshow. When I use one or the other to control the slide show, it works. However, what I want to do is to switch between the two buttons, so that they work together like this:

  1. If the slide show is playing, PauseBTN is visible. If PauseBTN is clicked, stops slideshow and PlayBTN becomes visible.

  2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, stops slideshow and PauseBTN becomes visible.

  In other words, clicking on the button control not only the slideshow, but changes which button is visible.

  I got this working with a video clip of two frames and bitmaps in static, but when I swap the bitmaps for the buttons, rollovers button stop working.

  Can someone give me some advice please?

  ... Mike

  This is not a flexible configuration.  PauseBtn should be a movieclip with a up more and eventually to the bottom of chassis and PlayBtn either a movieclip with a up more and eventually to the bottom of the frame.  You can then use:

  PauseBtn._visible = true;  or false ot visible property of your control button.

• Can anyone tell how to insert a string between the two another string...?

  Can anyone tell how to insert a string between the two another string...?
  For example: String1 = 'ABC '.
  String2 = "XY".
  
  I want that the chain of output like "AXYBC".

  If you have the Position where you want to place your chain, this might work:

  SQL> r
    1  declare
    2    vStr1 varchar2(20) := '123456789';
    3    vStr2 varchar2(20) := 'aa';
    4    nInsertPos number := 3;
    5    vResult varchar2(20);
    6  begin
    7    vResult := substr(vStr1, 0, nInsertPos) || vStr2 || substr(vStr1, nInsertPos+1);
    8    dbms_output.put_line(vResult);
    9* end;
  123aa456789
  

  If you want to insert it after a special character, you can search for the position of your character with the help of instr

  concerning

• Switching between the two entries of automatic chain

  Hi guys, I have several entries of chain on the front panel, which everyone should take an entry of a code scanner barcode.

  What I want to do VI meet is, jump to the next string available, entry, once one of the string entry receives an entry of the barcode scanner. (as shown in the transition between the photo 1 and photo 2).

  Is this possible?

  See you soon!

  Photo 1

  

  Photo 2

  

  You can use a structure of the event with a value change event. When the value of the control changes, which means that you scanned, you can set the focus to the control, depending on whether you want to enter your data analysis.

• Switch between the two sequences. How to set the shortcut keys?

  Is there a " First " function switch between open sequences with the keys? If so, What's his name? Thanks.

  Isn't shift - 3?

• find and change between the two

  I want to change in my text frames written in the style of paragraph text "EBT".

  Between 1 to 3 of the text 'ABC '.

  Between the 4 and 7 'BIM' text

  Between 7 and 10 'KLM '.

  must write

  where and how a mistake

  var myDoc = app.activeDocument;
  var myFrame = myDoc.allPageItems;
  for(var i=0;i<myFrame.length;i++){
  //if(myFrame[i].appliedObjectStyle == tmc) {
  //if(i==5){break;}
  app.findGrepPreferences = app.changeGrepPreferences = null; 
  app.findGrepPreferences.appliedParagraphStyle = "myParS";
  app.findGrepPreferences.findWhat = "EBT";
  if ((i > 0) && (i <= 3)) {var changeX = app.changeGrepPreferences.changeTo  = "ABC";}
  if ((i > 3) && (i <= 7)) {var changeX = app.changeGrepPreferences.changeTo  = "BIM";}
  if ((i > 7) && (i <= 10)) {var changeX = app.changeGrepPreferences.changeTo  = "KLM";}
  myFrame[i].texts[0].changeGrep(); 
  app.findGrepPreferences = app.changeGrepPreferences = null; 
  
  

  Dirty solution... ;-)

  var myDoc = app.activeDocument;
  var myFrame = myDoc.allPageItems;
  
  for(var i=0;i 0) && (j <= 3)) {app.changeGrepPreferences.changeTo  = "ABC"; myFrame[i].changeGrep(); }
      if ((j > 3) && (j <= 7)) {app.changeGrepPreferences.changeTo  = "BIM"; myFrame[i].changeGrep(); }
      if ((j > 7) && (j <= 10)) {app.changeGrepPreferences.changeTo  = "KLM"; myFrame[i].changeGrep(); }
      app.findGrepPreferences = app.changeGrepPreferences = null;
  }
  

• What is the best way to switch between the two sets of bookmarks, say 'work' and 'private '?

  I want to use for sets of bookmarks, so that when I'm not working, I'm not distracted by my favorites not work and vice versa. For the last two months, I use two user accounts to achieve, but it's kinda a PITA. Links from other applications like Thunderbird mail are opened in the default profile. In other words, when I'm not at work and I click on a link in an e-mail, a new window opens with the work of my Firefox profile.

  All I need is a thing or an extension to switch quickly sets bookmark. Or a way to switch profiles without having to open a new Firefox window. Any ideas?

  You can not get Firefox works as you explain that you want. The default profile cannot be changed on the fly for the profile you are currently using. This message "Firefox is already running... "returns to cause you or 'something' trying to open a profile 2 (or later), unless -no-remote command has been used to open the additional profile. And -no-remote will not work to open the default profile without causing problems with the way Windows works with "call" the default browser.

  In response to your last statement - "to separate my work and private stuff I just need to change the content of my bookmarks bar, so I was hoping there was a trick to keep groups of favourites."

  This extension will allow you to change the Bookmarks Toolbar folder while you use Firefox.
  https://addons.Mozilla.org/en-us/Firefox/addon/set-as-bookmarks-toolbar-folde/
  I just installed this extension and check that it still works in 35 of Firefox.
  There is a context menu item for 'Set as Bookmarks Toolbar Folder' ' which appears when the Menu Bookmarks menu Bar drop-down is used (not in the library window or the bookmarks bar). This menu item is displayed when you right-click a folder in the folder Menu bookmarks. It does not appear with the folder "Personal bar" or the "Unsorted Bookmarks" - only a folder in the Menu "Favorites".
  Should be 'resolved' eager to have two different settings for the bookmarks toolbar, but the profile default 'thing' is always a problem for what you are trying to accomplish. I don't 'see a fix' for that - without resorting to a 2nd user account window, which is what I thought you were referring to by "I use two user accounts to achieve" in your initial post.
  And because the menu bar is hidden by default, these days, you can use Alt and B to open the bookmarks menu dropdown Bar Menu 'revealed' so you can access this menu "Set as bookmarks toolbar folder" item - without having to show the Menu Bar all the time.

  BTW, using 'accounts' instead of 'Profiles' can be confusing during the review of Firefox profiles.

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Problem blackBerry Smartphones: keeps the switch between the headset and speaker

  Hey guys, I'm new here so I will try to provide everything I can. I have a Bold 9700 with ATT and the OS is v5.0.0.405. Well a couple of weeks my blackberry has started to develop an annoying problem. When in a call, most of the time (not all) he starts switching between icon of headset and normal speaker. When this happens, you can hear the phone switch between the two through the speaker, and it makes it so I can't hear someone and they don't hear me. I'm out of my warranty of 30 days of ATT, but I think im still well within the warranty of the RIM. I admittidly dropped, but this should not happen. Nothing like this has happened to any other phone I've owned. Is this what can I do to get some sort of replacement?

  Thank you!

  shigity wrote:

  Is this what can I do to get some sort of replacement?

  Thank you!

  All services, warranty or otherwise, is provided by your operator and will be carried out in accordance with the contract you signed with them. Go see them.

• Switching between the screws in the secondary

  I have trouble getting a test program to work. I created two screws (test1 and test 2) what to do simple tasks (such as counting or turn on a Boolean value). I'm trying to switch between the two screws through a primary school in VI. I would like to run the two screws when she is called, and then switch between them while they run. However, I was making mistakes and I am at a loss to know what to do. Screws are attached.

  One of the errors I get is that of VI references are not valid, and I don't know how to solve this problem.

  OI, I'm having a few problems this morning.  Try this vi.

• can you have a version of CS and several version of the software installed for example Lightroom CC both?

  can you have a version of CS and several version of the software installed for example Lightroom CC both?

  Yes, you can have multiple versions installed.

  Please see this link:

  Download previous versions of Adobe Creative applications-

  Download previous versions of Cloud Creative applications

  You can have both CC and CS6 installed through creative cloud. You can also leave the old purchased software installed.

• I have a new laptop that I have Lightroom 4 installed and updated. I can't find my keys for the version 5 & 6 Please help

  I have a new laptop that I have Lightroom 4 installed and updated. I can't find my keys for the version 5 & 6 Please help

  John, this is how you can quickly find your serial number

  Atul_Saini

• How can I download CS3 version 'later' and make it work on a newer computer? (I have the activation code that I bought in 2008)

  How can I download CS3 version 'later' and make it work on a newer computer? (I have the activation code that I bought in 2008)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I have Lightroom and Photoshop installed on my desktop. I agree £8,57 per month to receive the Plan from Adobe.  I just bought a laptop. I have both programs installed on my laptop and my office. How to download

  I have Lightroom and Photoshop installed on my desktop. I agree £8,57 per month to receive the Plan from Adobe.

  I just bought a laptop. I have both programs installed on my laptop and my office.

  How can I download on my laptop?  Any help gratefully received

  John

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)