VI analysis with subvis
I've been testing the unit test tool provided with LabVIEW and I can set up and run tests on each unit. The tool is able to create a unit test for every vi in a project at one time? I could then just modify each test to test the vi that it is. Also, is it possible with this tool to run a test on a vi with subVIs and inject errors or other inputs to the subVIs? Or is it a case of test vi each separately? This makes a great project.
Tay
Hey Tay,
You can use the program installation and disassembly screw to test your screws in this way.
Refer to the installation and disassembly VI section in the Help Manual: http://zone.ni.com/reference/en-XX/help/372584B-01/lvutfhowto/utfh_config_set_tear/
Tags: NI Software
Similar Questions
-
How to set up a chart and store data points in a table to allow me to do the analysis with him
Hello
I am relatively inexperienced, with the help of labview and I try to do the following with the help of an oscilloscope Tektronix TDS 2001 C but have no idea how start.
(1) load a previously saved regarding the volts/div and setting s/div on oscilloscope
(2) pass everything that appears on the o-scope on my computer screen
(3) save the data table so that I can do a scan with it
I watched some of the diagrams of block of example provided with the driver I downloaded for this particular unit but am still very confused. Any help would be greatly appreciated
Hello Chron0,
I know I guess a little here, but have you downloaded a specific device of ni.com/idnet driver? This is a good place to find the built-in drivers for third-party devices, and there is one for this particular model. That being said, when I looked at the examples in the downloaded zip file, I saw a couple of predefined options that look like they should satisfy question #2 of your project based on the method to use to acquire a waveform (permanently, several waveforms, etc.). Similarly, in the Public folder is a configuration of channel VI which I think should satisfy what you are wanting to do to the #1 question.
Depending on what you are willing to do data analysis, with regard to the software used, functions, etc., there are several reporting tools in LabVIEW which will allow you to save the table and manipulate later. A good place to begin with, it will be to search for "File i/o" in the search bar helps LabVIEW and select the option under the heading "Palette." There are several options here that I think might be useful, including writing in the file.vi worksheet.
It will be also good to be familiar with the Finder example OR in LabVIEW. There are examples of spreadsheets / saving data, as well as VISA, which you can do some reading on, because the interface VISA, it's how you communicate with this device (Fortunately, the driver already download it!)
Good luck to go ahead and keep us informed here on your project!
-Dave C
Technical sales engineer
National Instruments
-
How to merge CCIP analysis with my existing SPR SPR
Hi all
I need to build the end of charge OBIEE report. So I need merge DAC analysis with my existing SPR SPR... Used after the RPD ((http://rnm1978.wordpress.com/2009/07/23/mark-rittmans-obiee-repository-for-dac/)
In my existing SPR, I use Oracle Datawarehouse (where in all my paintings is present)... My database is oriented to the QA... environment where all tables have the schema OBIAPP.
But the DAC tables are comin to OBISchema... Then how to merge the RPD to analysis DAC with my Exisitng DPR.
Need help... Urgent
Published by: 796797 on July 13, 2011 10:50If you want to merge two rpds and combine them into a single RPD you can follow this link
http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/bi/BIEE/r1013/Merge/Merge.html
http://varanasisaichand.blogspot.com/2010/03/how-to-merge-two-repositories.html
http://download.Oracle.com/docs/CD/E14571_01/bi.1111/e10540/mngreposfiles.htm#insertedID3
http://gerardnico.com/wiki/dat/OBIEE/bi_server/obiee_repository_merge -
error on the stand-alone with Subvi application
I developed a VI that call a Subvi with Labview 8.6. It works fine in VI or in an executable file on my development computer.
I want to run it on another PC, so I have created an installer with the following additional installer:
-4.4 NI-VISA run time engine
-Labview 8.6 run time engine
-Labwindows/CVI 8.5.1 run time engine
NOR-DAQmx 8.7
On the other PC, the application startup, but when he calls the Subvi, I see this message
LabVIEW: There is no external Code.
VI 'testeur.vi' was arrested to unknown "" a call to 'acquisition.vi '.
has anyone ever seen this problem?
By reading this post http://forums.ni.com/ni/board/message?board.id=170&message.id=424511&query.id=2057776#M424511 , I found the solution. CIN is obsolete, and so it is best to use the DLL.
With this statement, http://zone.ni.com/devzone/cda/tut/p/id/4877 I generate a DLL and it works properly.
-
How to export all the analyses with an export buton
Hello, I am interested how to export analysis different with one button export, at the moment I have 3 tests on 1 dashboard in OBIEE 11.0.1.9 and on all the analyses I export, button but I need all the analyses to be in 1 Excel file so I look for a solution summed up the export option, but I can't find. Any help is appreciated.
Hello
First, I checked your other threads and it's "11.1.1.9" and not "11.0.1.9" - just to be precise.
Secondly, what you are looking for is 'Export' option in the dashboard menu:
You can not only export all analyses on your page as you request but even all analyses on all pages of the whole dashboard.
-
I am creating a report that combines 2 queries and displays the Top7 in the combined result set result.
Combining the results is easy, using the feature "Combined results based on the union" page of analysis criteria. However, once I've defined the union it is not possible to add a TopN(..., 7) formula for the final result. I can add the formula to each result set separately before the union, but it does not give the desired result.
Y at - it a trick or a hack to add this field to the set of results within the same analysis? I can get it fact basing a second analysis on that with the result, but surely OBIEE should support this within the same analysis too...
I use OBIEE 11.1.1.6, btw.
Hi KurtGeens,
Have you tried adding a result column and calculate the rank or he is using your custom form.
You can add columns to your UNION query results and all the calculations on the final together. You will be able to view the columns of your two analyses and perform calculations more.
This should be sufficient for most of your needs.
-
How Oracle calclutes the cost for table analysis with non-voltage costs CPU.
If the CPU costing are disabled and the column of blocks shown 1000 for a table in the user_tables and DB a DB_BLOCK_SIXE = 8KB and DB_FILE_MULTIBLOCK_READ_COUNT = 8.
What will be the cost of a complete analysis of the table? How it will be calculated.user445775 wrote:
Thanks Randolf,Infact I'm reading the same book and I was confused with the "adjusted" way MBRC is calculated?
is it remain static in the database if I don't change MBRC? If not what are the factors can change the MBRC "adjusted".I recommend to download the code repository and run the script 'calc_mbrc.sql '. For each MBRC, it will show you the corresponding MBRC "amended". This looks like an adjustment factor "coded", static, built-in that simply depends on the defined MBRC, so for example if you use MBRC = 16, 10.40 is used as MBRC "adjusted", if you use a 64 MBRC a MBRC "adjusted" 25,84 will be used for the calculation (note how the largest EEG MBRCs and a more pessimistic "adjusted" value) etc.
Kind regards
RandolfOracle related blog stuff:
http://Oracle-Randolf.blogspot.com/SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676 /.
http://sourceforge.NET/projects/SQLT-pp/ -
Is available or not for RSS bar analysis? He was a favorite of mine feature to stay connected without having to open a site on news or click on anything other than the title that interested me. If the analysis is no longer available, is there a page in order to get similar things to the old RSS feeds? Can it be done through FaceBook?
The only RSS feature in Firefox's live bookmarks.
For a news ticker, you've probably used an add-on like HeadlinesTicker.
As far as I know, this is the only news ticker Add on available (another one, NewsBar seems to be obsolete and non-functional in the latest version of Firefox). However, there are several other RSS reader modules that display news in formats other than a news ticker.
- https://addons.Mozilla.org/firefox/addon/bamboo-feed-reader/
- https://addons.Mozilla.org/firefox/addon/NewsFox/
You can also subscribe to feeds through web sites as follows.
-
I'm new with daisylab and I want to make calculations of iemg with signals saved previously.
(1) I want to resample a signal of 3000 Hz to 1000 Hz
What is the equivalent of the help (matlab) daisy lab avarage, window or other function?
(2) how can I calculate the mean values of each 100 samples?
Here is everything but the last step.
In the last step, the effective sampling rate is 10 s/s, so the data before and after the peak of 5 ms do not work.
This is perhaps a good starting point for you.
-
When I finally tried to solve the initial problem scanner HP in resettlement of the disk to scan, I kept getting the message that it was not compatible with Windows 95 or 98. But I have Windows XP. So I finally downloaded and installed scanner drivers, software and upgrades on HP website. Well, the works of scanner, but now there are new problems. 1 - once the hp scanner window is displayed by clicking on import through Scanner HP, most of the menu at the top of the window items is not available. For example, I go to settings and all that is now available is to scan in color. There are 5 other options I should be able to click on, for example, resolution. And I need that. I thought, no problem, I'll just use WIA as before, as well as the WIA window came much faster than the HP one. Problem 2 - in elements, I can go to WIA, but it says "NO compatible WIA devices have been detected." That's happened? I tried to go into Panel, scanners and cameras, add a device... but he could not find the scanner and of course, he cannot read the HP disc because of the inconsistent message of windows 95-98 (on my Windows XP computer!). Can - I just uninstall my scanner and if I make the WIA will be able to find it after that? I do not understand how I could use WIA and now I can't. I know it has something to do with that I downloaded and installed at HP, but what? I hope someone can help. I have a huge project that I'm trying.
Hello Hotrodgrandma,
Thank you for your message. It seems that when you have downloaded and installed the driver from the HP website, you cannot have downloaded and installed the updates as well. Click HERE to open the HP website and download the appropriate files. Below, I will give an overview of what you need to download and install in order.3. all three updates, in no particular order.Please let us know if this is or is not to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I have windows vista home Basic. after update in full scan at end of scan it stops with error 0x800106ba something caused scan to stop, but if you do a quick scan, it works fine, is there a solution to this problem, since I've never had this problem before and I tried the suggestions of others on the forum, but without success , or maybe a new update to fix this. I am using Webroot Secure Anyhhere Antivirus program all this time. An other update of definition 1.185.2784.0 was made on 10/10/2014, but does not
correct the error. Please need help to repair
Jose
After this last update for windows defender 1.185.3248.0 definition as of 14/10/2014, my full crawls of windows defender now working
Thanks for help
-
Analysis with os 5.0 and Qr code barcode
Hi friends,
I want to develop code barcodes and qr code scanner with blackberry os 5.0?
Please, give me suggestion for this direction.
BlackBerry has predict library barcode but its on os 6.0.
I'm zxing library felt now. but not exact solution,
give me an answer.
Thank you.
I did the code barcode scanning after all the stuff.
I found the solution.
http://aliirawan-Wen.blogspot.com/2011/05/barcode-scanner-for-BlackBerry-OS-50.html
See this thread its nice with auto scan camera.
ask if no query
-
No analysis with JO 6300 on Mountain Lion
I have a newer iMac with the Mountain Lion. I hooked my HP OfficeJet 6310 AIO and installed the printer through the system preferences utility print & scan.
Printing works fine. However, there is no option to scan at all. I also tried through preview and ImageCapture, but the scan option is grayed on both.
Any help?
Hello
Restart your Mac, then click on the Apple icon and select software update.
Don't forget to select any HP or Apple update.
Now try to scan and check any change.
If the same persists, download and install the package below and then search for any changes:
http://support.Apple.com/kb/dl907
Shlomi
-
I created the analysis report which has-
-Opening balance
-L' period activity
-Closing balance.
Now, the activity of period can be a. period to Date, quarter to date and year to date.
I have PTD and QTD values... YTD will be calculated field = (ball Beg + period activity)
Now, I want to add guest user that allows the user to select either - 1. PTD, QTD or CDA
and report displays analysis accordingly.
I need instructions to - how to add this in the prompt controls and criteria - to make it work according to the value of the parameter to create analysis
Wait response
SS
Hello
You can try this link below to view the report based on the quick selection.
http://bihub.blogspot.in/2013/07/OBIEE-11g-display-multiple-reports.html
Thank you
Prasanna
-
BPEL has problems of analysis with XSD attributes
Hello
When I create a BPEL process with XSD output below, everything works fine.
+ < xsd: element name = "WorkflowOutputData" > +.
+ < xsd: annotation > +.
+ < xsd: documentation > +.
This element defines an element in XML output
which is used by all services from BPEL workflow
to send the output to the calling program
+ < / xsd: documentation > +.
+ < / xsd: annotation > +.
+ < xsd: complexType > +.
+ < xsd: SEQUENCE > +.
+ < xsd: element name = "Status" type = "xsd: String" minOccurs = "1" maxOccurs = "1" / > +.
+ < xsd: element name = "Errors" minOccurs = "0" maxOccurs = "1" > +.
+ < xsd: complexType > +.
+ < xsd: Sequence minOccurs = "0" maxOccurs = "unbounded" > +.
+ < xsd: element name = "Error" type = "Comment" / > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < xsd: element name = "Warnings" minOccurs = "0" maxOccurs = "1" > +.
+ < xsd: complexType > +.
+ < xsd: Sequence minOccurs = "0" maxOccurs = "unbounded" > +.
+ < xsd: element name = "Warning" type = "Comment" / > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < xsd: complexType name = "LogMessage" > +.
+ < xsd: SEQUENCE > +.
+ < xsd: element name = "Code" type = "xsd: String" minOccurs = "1" maxOccurs = "1" / > +.
+ < xsd: element name = "Description" type = "xsd: String" minOccurs = "1" maxOccurs = "1" / > +.
+ < xsd: element name = "FlexField1" type = "xsd: String" / >.
+ < xsd: element name = "FlexField2" type = "xsd: String" / >.
+ < xsd: element name = "FlexField3" type = "xsd: String" / >.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
As soon as I add under the element heating approvers as described below in the process BPEL XSD output, I'm not able to test the BPEL processes in the BPEL console.
Screen to "Launch an instance of test" in BPEL console only displays not any which form html or xml to enter data.
+ < xsd: element name = "WorkflowOutputData" > +.
+ < xsd: annotation > +.
+ < xsd: documentation > +.
This element defines an element in XML output
which is used by all services from BPEL workflow
to send the output to the calling program
+ < / xsd: documentation > +.
+ < / xsd: annotation > +.
+ < xsd: complexType > +.
+ < xsd: SEQUENCE > +.
+ < xsd: element name = "Status" type = "xsd: String" minOccurs = "1" maxOccurs = "1" / > +.
+ < xsd: element name = "Errors" minOccurs = "0" maxOccurs = "1" > +.
+ < xsd: complexType > +.
+ < xsd: Sequence minOccurs = "0" maxOccurs = "unbounded" > +.
+ < xsd: element name = "Error" type = "Comment" / > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < xsd: element name = "Warnings" minOccurs = "0" maxOccurs = "1" > +.
+ < xsd: complexType > +.
+ < xsd: Sequence minOccurs = "0" maxOccurs = "unbounded" > +.
+ < xsd: element name = "Warning" type = "Comment" / > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < xsd: element name = "Approvers" minOccurs = "0" maxOccurs = "1" > +.
+ < xsd: complexType > +.
+ < xsd: Sequence maxOccurs = "unbounded" > +.
+ < xsd: element name = "Approver" type = "Actor" / > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < / xsd: element > +.
+ < xsd: complexType name = "LogMessage" > +.
+ < xsd: SEQUENCE > +.
+ < xsd: element name = "Code" type = "xsd: String" minOccurs = "1" maxOccurs = "1" / > +.
+ < xsd: element name = "Description" type = "xsd: String" minOccurs = "1" maxOccurs = "1" / > +.
+ < xsd: element name = "FlexField1" type = "xsd: String" / >.
+ < xsd: element name = "FlexField2" type = "xsd: String" / >.
+ < xsd: element name = "FlexField3" type = "xsd: String" / >.
+ < / xsd: SEQUENCE > +.
+ < / xsd: complexType > +.
+ < xsd: complexType name = "Player" > +.
+ < xsd: attribute name = "Name" / > +.
+ < xsd: attribute name = "Email" / > +.
+ < xsd: attribute name = "Name" / > +.
+ < xsd: attribute name = "ApprovalSequence" / >.
+ < xsd: attribute name = "FlexField1" / >.
+ < xsd: attribute name = "FlexField2" / >.
+ < xsd: attribute name = "FlexField3" / >.
+ < xsd: attribute name = "FlexField4" / >.
+ < xsd: attribute name = "FlexField5" / >.
+ < / xsd: complexType > +.
(1) approvers element is added to the output xsd and not at the entrance to xsd.
(2) I see a javascript error 'Object expected' iin "Launch a test instance" screen BPEL.
(3) the new element of the approver only contains attributes.
Could someone help me understand the issue with the XSD. Your help is very appreciated.
Thanks and greetings
LeenaWhat is xsd valid, I would have thought
see you soon
James
Maybe you are looking for
-
Partition missing after restoring from Time Machine
Hello world I use an iMac 27-inch mid-2010 and have a WD1230 external 2 TB disk attached to it. I partitioned the external hard drive to allocate 1 TB as a Time Machine backup repository and the other 1 to to put in music, movies and images files to
-
Java games crashing when loading on Satellite Pro C660D
So I have the Toshiba Satellite Pro C660D for Christmas. The first thing I did as a teenager was to examine the specifications to see if she would be able to reasonably run the games. Care was fine for me. So I installed a few games, Minecraft instal
-
G50 - 70 Wireless does not not at startup and virtual machine
Hello IM here.im again faced a problem in wireless.i can not access my lenovo g50 - 70 bluetooth, wifi at startup (live cd) and in virtual machine.please help its really annoying...
-
Hello. I have an iPhone on iOS 9.2 and siri 6 did not work. I can do things as said in the title, but could not open all the apps or do something with apple's music. The message that I get when asking to 'Open the Messages app' is 'you can't see an a
-
Complete the pop-up message button
Hello I would ask... How to end execution of a pop up message button. There is a select statement, and on this, there are 2 buttons. Press Ok to continue Press Finish to end. but I can't use RunState.Execution.Terminate in the expression of the Finis