Switching between the two entries of automatic chain

Similar Questions

• Switch between the two alternative provisions (both in portrait mode)

  I have created two alternative facilities for the purpose of these two being in portrait orientation, as they are to view the same article in two different languages. Is there a way to switch between the two using the navto: / / action or by using bookmarks and by using the go to destination. I tried both but I was wondering if there was something there.

  I have a publication ideally appearing in both languages, though being a main language and the seconary being there only for reference. I'm not wanting to produce two folios and use the filter region with Apple, as have the secondary language, as a reference is a selling point for the publication. Also using"States" would be more complicated.

  He must choose between non-ideal solutions, as a magical sticky toggle 'use this language' is not available.

  If you do mind ' t using the rocker on each page, then navto would be OK. and each page of the reference language should have a back button go. All reference pages that can be marketed after the main pages, and each of them can be hidden from OCD.

  If you opt for parity between languages, then you could start the app with no menu-swipable selection page, where you can decide what language to use. At the end of these two sections, another non-swipable page would give you the choice to read another language. The trick of no-swipable page gives users a feeling of an application of the only language of his choice.

  And I would use diapers, not another layout for the production. Seems to be a cleaner solution for me.

• Switch between the two button symbols

  Hello

  I'm new to AS, but not new to programming.  I'm using Flash CS4.  Here's what I'm trying to do.

  I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of the slideshow. When I use one or the other to control the slide show, it works. However, what I want to do is to switch between the two buttons, so that they work together like this:

  1. If the slide show is playing, PauseBTN is visible. If PauseBTN is clicked, stops slideshow and PlayBTN becomes visible.

  2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, stops slideshow and PauseBTN becomes visible.

  In other words, clicking on the button control not only the slideshow, but changes which button is visible.

  I got this working with a video clip of two frames and bitmaps in static, but when I swap the bitmaps for the buttons, rollovers button stop working.

  Can someone give me some advice please?

  ... Mike

  This is not a flexible configuration.  PauseBtn should be a movieclip with a up more and eventually to the bottom of chassis and PlayBtn either a movieclip with a up more and eventually to the bottom of the frame.  You can then use:

  PauseBtn._visible = true;  or false ot visible property of your control button.

• can I have both versions installed and switch between the two

  Can I have two different versions of firefox are installed and switch between them? If so, how do I set up.

  Yes, I have several versions of firefox are installed. Firefox 3.6 is always taken in charge and course, there is the beta, the Aurora and the roads every night. I'm guessing that the other default channels install in clean places out there rather than overwrite your current installation, if not choose the custom installation option.

  This is something advanced, generally used by developers etc.

  CARE do not uninstall and take an option to remove personal settings, but that is written, as that attempts to remove all the profile data for all versions Firefox installed, you will lose the passwords and bookmarks etc..

  Use unique profiles - where Firefox stores your bookmarks, passwords and other user data for each version, or you will have problems.

  • See http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Testing_pre-release_versions#Installing_multiple_versions

• Switch between the two sequences. How to set the shortcut keys?

  Is there a " First " function switch between open sequences with the keys? If so, What's his name? Thanks.

  Isn't shift - 3?

• What is the best way to switch between the two sets of bookmarks, say 'work' and 'private '?

  I want to use for sets of bookmarks, so that when I'm not working, I'm not distracted by my favorites not work and vice versa. For the last two months, I use two user accounts to achieve, but it's kinda a PITA. Links from other applications like Thunderbird mail are opened in the default profile. In other words, when I'm not at work and I click on a link in an e-mail, a new window opens with the work of my Firefox profile.

  All I need is a thing or an extension to switch quickly sets bookmark. Or a way to switch profiles without having to open a new Firefox window. Any ideas?

  You can not get Firefox works as you explain that you want. The default profile cannot be changed on the fly for the profile you are currently using. This message "Firefox is already running... "returns to cause you or 'something' trying to open a profile 2 (or later), unless -no-remote command has been used to open the additional profile. And -no-remote will not work to open the default profile without causing problems with the way Windows works with "call" the default browser.

  In response to your last statement - "to separate my work and private stuff I just need to change the content of my bookmarks bar, so I was hoping there was a trick to keep groups of favourites."

  This extension will allow you to change the Bookmarks Toolbar folder while you use Firefox.
  https://addons.Mozilla.org/en-us/Firefox/addon/set-as-bookmarks-toolbar-folde/
  I just installed this extension and check that it still works in 35 of Firefox.
  There is a context menu item for 'Set as Bookmarks Toolbar Folder' ' which appears when the Menu Bookmarks menu Bar drop-down is used (not in the library window or the bookmarks bar). This menu item is displayed when you right-click a folder in the folder Menu bookmarks. It does not appear with the folder "Personal bar" or the "Unsorted Bookmarks" - only a folder in the Menu "Favorites".
  Should be 'resolved' eager to have two different settings for the bookmarks toolbar, but the profile default 'thing' is always a problem for what you are trying to accomplish. I don't 'see a fix' for that - without resorting to a 2nd user account window, which is what I thought you were referring to by "I use two user accounts to achieve" in your initial post.
  And because the menu bar is hidden by default, these days, you can use Alt and B to open the bookmarks menu dropdown Bar Menu 'revealed' so you can access this menu "Set as bookmarks toolbar folder" item - without having to show the Menu Bar all the time.

  BTW, using 'accounts' instead of 'Profiles' can be confusing during the review of Firefox profiles.

• Switching between the screws in the secondary

  I have trouble getting a test program to work. I created two screws (test1 and test 2) what to do simple tasks (such as counting or turn on a Boolean value). I'm trying to switch between the two screws through a primary school in VI. I would like to run the two screws when she is called, and then switch between them while they run. However, I was making mistakes and I am at a loss to know what to do. Screws are attached.

  One of the errors I get is that of VI references are not valid, and I don't know how to solve this problem.

  OI, I'm having a few problems this morning.  Try this vi.

• Problem blackBerry Smartphones: keeps the switch between the headset and speaker

  Hey guys, I'm new here so I will try to provide everything I can. I have a Bold 9700 with ATT and the OS is v5.0.0.405. Well a couple of weeks my blackberry has started to develop an annoying problem. When in a call, most of the time (not all) he starts switching between icon of headset and normal speaker. When this happens, you can hear the phone switch between the two through the speaker, and it makes it so I can't hear someone and they don't hear me. I'm out of my warranty of 30 days of ATT, but I think im still well within the warranty of the RIM. I admittidly dropped, but this should not happen. Nothing like this has happened to any other phone I've owned. Is this what can I do to get some sort of replacement?

  Thank you!

  shigity wrote:

  Is this what can I do to get some sort of replacement?

  Thank you!

  All services, warranty or otherwise, is provided by your operator and will be carried out in accordance with the contract you signed with them. Go see them.

• How can I disable auto switching between the LCD screen and the viewfinder electronic on Sony A7sii?

  Hi guys,.

  I don't have it if the table on the right, but here's my question...

  Disabling automatic switching between the lcd and the viewfinder on the Sony A7Sii?

  Thanks in advance,

  Zia

  Hi @dslrshooters,

  could you please change your message header to match the content of you post.

  in the A6300, you can change the way in which the camera automatically switches between NET & screen in

  Menu custom (cog symbol): FINDER/MONITOR.

  with a little luck, you have the same menu on the 7Sii.

• Find the difference of pressure between the two transducers using a NI DAQ 6008

  Hello

  First of all, I'm a relatively inexperienced LabVIEW Developer, so my apologies in advance if this message does not have something, or otherwise lacks clarity.

  I try to develop a VI as follows the pressure difference between the 2 EME 3100 pressure sensors (4-20 my), related to two different pressure lines, using a NO-DAQ 6008. I would like for the acquisition of data to read the two transducers, then have him find VI the differential and write this differential in an Excel file.

  The data sheet for these sensors may be found at: http://www.gemssensors.com/Products/Pressure/Pressure-Tranducers/Sputtered-thin-film/~/media/GemsNA/...  It is a 3-wire system, with a voltage between 8 - 24V. I use an external power supply of generic brand to power sensors, which provides a maximum of 24V @ 4A.

  I drifted my physical connection (for the two transducers) this thread http://forums.ni.com/t5/LabVIEW/I-am-having-trouble-Omega-PX4200-Pressure-Transducers-to-where-I/m-p... and am relatively certain of the accuracy of the information. For purposes of signal conditioning, I use a 500 Ohm resistor between the signal of each transducer and the Earth wire.  On the side of software, I use the latest version of LabVIEW (2011) as well as MAX on a Windows 7 64-bit machine.

  In an ideal world, the sampling rate would be as high as possible, but 4 samples per second would suffice for all purposes useful.

  Given this goal, are there any sample of VI (especially for MAX, which I have not yet used) who would be similar/applicable to this project, specifically, regarding setting a sampling frequency, calibration of the transducers or affecting the pins/channels appropriate? All resources would be greatly appreciated.

  Kind regards

  MG Wilkinson

  Measure the voltage between the two resistance (resistance by probe 4-20 MA) using the differential inputs of the x 600.

  When you configure the task, you can read several entries at once, by entering in "Dev_ / AI0:1" in the physical channels and using the "several channels / {unique |}". multiple} samples"polymorphic instance.

  600 x can read 1kS/sec.

  Do maths/conversions on the table, and then simply subtract the two tables.

  Could also take some samples (10-100) at 1 kHz and their average together, give you a smaller rate effective sampling but with less noise.

  A loop of producer-consumer would be good architecture here, let the daqmx reading live in a loop and sends the data via a queue to a 2nd consumer that performs mathematical operations and write to a file.

  

• I can't stop finite samples daqmx read between the two?

  Hi all

  I want to read data from 10 seconds to a trigger is received. for this im using daqmx task finished sample mode and read the data on the trigger getting. It works fine but I can't stop my vi between the two when its reading of the data. I have to wait for it to complete the reading of values, and then stop the vi.

  so I switched to continuous sampling mode that allowed me to stop the vi whenever I want.

  I just want to know is there any means or the property using which I can stop my task over daqmx read when I want?

  I guess you call DAQmx Read with extraordinary value (-1) for samples of #.  It is also the default if left thread continues.  In a finished sample task, it means to wait until the memory full buffer has been filled with samples before returning.  Once you make that call, you cannot directly finish soon.  You're stuck waiting for buffer fill or for the timeout expires (default 10 seconds).

  One way to avoid getting stuck is not to ask for samples that do not exist already.  You can query a DAQmx Read property, known as the "Samples available" or something like that and son of this result in a call to DAQmx Read.  Such a call will return immediately whatever data are currently available.  Subsequent calls will give you samples.

  -Kevin P

• Captivate 9 - trying to switch between the States of an object when a user clicks on this object?

  Try to switch between the States of an object when a user clicks on this object? I have successfully used the function of the State of the object to change the object to a different State, but I need it back to its Normal state when it is selected again in the State has changed and then continue to turn every State when you click on it. It is an interaction of flashcard. I can do this using several objects and hide/show, but I would do it with States and unique objects.

  You're talking about custom or InBuilt States. What kind of action do you use: a simple or advanced/shared action?  If you simply switch between two States, use the approach I described in this blog post:

  1 share = 5 buttons toggle - Captivate blog

  You will probably need a user variable to track the status, but you can use the shared conditional action described in this blog.

• Keyboard shortcut to switch between the pixels and inches?

  Does anyone know if a keyboard shortcut allowing me to switch between the pixels and inches in photoshop cs6/cloud?

  You can change your keyboard Short and add your own shortcuts.  An easy thing to do would be to write a small script him would recover the units of Photoshop preferences and rule if its pixels switch in inches and if he switch inch toggle pixels between the two.  Once you have this script record an action that uses the scriot and assign a shortcut to the action key.

  if (app.preferences.rulerUnits==Units.PIXELS){app.preferences.rulerUnits=Units.INCHES;}
  else { if (app.preferences.rulerUnits==Units.INCHES){app.preferences.rulerUnits=Units.PIXELS;} }
  

• Can anyone tell how to insert a string between the two another string...?

  Can anyone tell how to insert a string between the two another string...?
  For example: String1 = 'ABC '.
  String2 = "XY".
  
  I want that the chain of output like "AXYBC".

  If you have the Position where you want to place your chain, this might work:

  SQL> r
    1  declare
    2    vStr1 varchar2(20) := '123456789';
    3    vStr2 varchar2(20) := 'aa';
    4    nInsertPos number := 3;
    5    vResult varchar2(20);
    6  begin
    7    vResult := substr(vStr1, 0, nInsertPos) || vStr2 || substr(vStr1, nInsertPos+1);
    8    dbms_output.put_line(vResult);
    9* end;
  123aa456789
  

  If you want to insert it after a special character, you can search for the position of your character with the help of instr

  concerning

• The Tab key no longer works for allows me to go between the text entry boxes

  After updating to the new version of Firefox the Tab key is no longer work when switching between the text fields to enter information such as shipping address, name and stuff like that where a simple TAB could sail between the text boxes.

  Hello benpierce25, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  • You also had a file User.jsin your profile folder .

  The user.js file does not exist by default. If you create the file, forget it, if you don't have not create the file, and then remove the User.js file, to see if the problem goes away (some programs create and write to the file also).

  Thank you