Can I have CC PS and LR CC on my desktop and my laptop?

Similar Questions

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• I can't have a log and snmp in vpn

  Hello

  I can't have a log and snmp in vpn when I want to achieve the management interface, or remote access to asdm and ssh is strange ok.it for your help thank you.

  Best regards

  If you want to access the ASA via a VPN connection, you would not use (or should use) NAT.  You only need to add command -access to the administration .

  So let's say you want to use the IP address associated with the interface named inside of handle the ASA.  Then you go inside management-access command

  --
  Please do not forget to rate and choose a good answer

• Can I have VMWare Player and Virtual Box to the same PC?

  Can I have VMWare Player and Virtual Box to the same PC?

  Can perform the same two times?

  Hello

  Yes, that's correct.

  --

  Wil

• Can you have v4.1 and v3.5 hosts in the same cluster?

  Can you have v4.1 and v3.5 hosts in the same cluster?  Before that I have to try, I thought I would check.  It would be only temporary until all hosts are upgraded.

  > Yes, 3.5 and 4.1 can coexist.

  But they can be managed vcenter 4.1 only, and you must leave the old license server for 3.5 hosts.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Can we have hash partition and list on 2 columns in the same table. How.

  Can we have hash partition and list on 2 columns in the same table. How.
  
  Work on 10g release 2

  # List-Hash is a valid composite partitioning strategy 11 from g.

• Can I have DVB - T and DVB - C channels in the same list?

  Toshiba TV have analog tuner, DVB - T and DVB - C.
  Can I use the same time channels DVB - T and DVB - C?

  My TV is connected to the cable operator with DTT and DVB - C signals and I would like to have channels on the same lists.

  Darek

  Hello

  I put t know what Smart TV you have but I n t think you can mix terrestrial (DVB - T) and digital cable (DVB - C) channels.

  My TV supports also DVB - T and DVB - C tuner and it is not possible to add DVB - T & DVB - C channels in the same list.
  However, I think in such cases its always recommended to read the user manual where these details and information are mentioned.

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• How can I have Windows 8 and Windows XP on a computer at the same time?

  Now, the computer is Windows XP. My ICT SBA require to use windows XP for better compatibility. How can I have 2 types of windows on 1 computer?

  A few months ago I installed Windows 8 client Preview of XP and I deleted the WIndows XP.
  Now, I have two systems at the same time, so I installed XP again, but the two windows of the failure to run (DLL and kernel problems).
  Then I installed XP again and the format of the drive that contains the Windows 8, I finally install XP on this drive.
  After that, I tried to install version 8 for Windows but I said that I can't keep the XP data, instead of keeping the whole OS.
  I find some articles online, but they introduce only have Windows 7, I can add XP...
  (I have two internal hard drives and an external hard drive)

  It pretty much applies to Windows XP, too. (Microsoft has removed most Windows XP of the database-specific help pages already.)

  Don't forget that Win8 PR is still a beta version.

  PS: Speaking of upgrade to Win8, you might find this interesting-online http://windowsteamblog.com/windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-windows-8-pro-for-39-99.aspx

  [Last updated - July 11, 2012, 06:27 UTC]

• Can I have my documents and the user profile on the same USB as my system?

  Hello

  I already have my documents and the user profile on a USB key. Can I copy an Image of the system on the same unit?

  Anne

  

  I'm saving My Documents and user profile on my USB key to back up regularly. I decided to do a system recovery disc set to DVD + R I have a set of 4 drives for my laptop. A free copy of MS allowing me to do.

  While it is tempting to use the DVD you already have, you could do yourself a disservice. What use would be if one of them turned out be wobbly when you need a year from now? Save the recovery image on an external hard drive would be much more reliable.

  I don't understand what you mean with "a free copy.

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How can I use the copy of Windows XP from the desktop on the laptop?

  loading xp with a different product code

  I have a laptop that works under XP. I lost track of the original disc. I also have an office which was under XP but Win 7 is working now. I have the XP installation disc. How can I use the drive of the desktop on the laptop?

  I dought you would get away with it. Try kb892130

  Or the pc on a xp boot cd, reinstall xp with xp cd.

• Can I have both Yosemite and El Capitan, installed on separate partitions on my Macbook Pro?

  I want to upgrade my Macbook Pro (Intel Core i7 2.8 GHz, 16 GB 1600 MHz DDR3) to El Capitan. However, I have an important piece of the software - Avid Pro Tools HD 11 - which runs on Yosemite, but not on El Capitan. Can I create two partitions, each containing one of these two operating systems and then choose to start the partition of Yosemite, when I need to use Pro Tools? If so, how should I do this? Is there a support article, I can read to help me? Can you Yosemite partition contain only the BONES of Yosemite, and the rest are on the other partition? Thank you.

  Yes, you can run them both. I guess the process is similar to this:

  http://osxdaily.com/2011/03/12/how-to-install-dual-boot-Mac-OS-x-10-7-Lion-and-1 0-6-snow-leopard.

  Having two OSs on separate partitions is like owning two computers, they are completely separate. You want to see in the two places will have to literally be in two places. Copy the files from one OS to another will be facilitated by a USB stick as if it were two separate machines, for example.

• How can I have a staff and a company that counts on the same computer for e-mail

  I have a personal email address on my computer. I want to be able to receive and send emails with my business on my computer as e-mail address.

  Can you tell me how to do this? Personal e-mail is * address email is removed from the privacy * and business email is tmcmahon @kellermechanical.com.

  To post a link see 2 toghether email in hotmail: http://explore.live.com/windows-live-hotmail-email-accounts-aggregation-using

• R610 Perc 6 / i Can I have matrix Raid and independent labels?

  My R610 with a Perc 6 / I can take 6 physical disks.  I want to create a raid 1 with the first two discs, then install 3 drive more that BONES can see and use in a storage space.  However, I can't figure out how.

  I have my setting up a raid and windows installed and I have the other 3 drives inserted, but Windows does not see them.  Maybe that's not possible, but I wanted to ask if anyone else had any ideas on how to make this work.

  Thank you.

  PERC 6 is not compatible no RAID, so if you want to use these disks separately, you must configure each as a single drive RAID 0.