Can I install the Vista upgrade to my system if I erased the hard drive?

Similar Questions

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

  I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

  Download and install the last set of drivers (starting with the chipset / driver motherboard) to the ASUS support site: http://support.asus.com/download/options.aspx?SLanguage=en&type=1

  J W Stuart: http://www.pagestart.com

• 4540 proBook s with 8.1 Windows 64 bit can't install the AMD driver

  I reinstalled my 4540 s Probook HP for Windows 8.1 of ISO MSDN AA and I can't install the display driver.

  I have two graphics cards in ntb: 4000 HD Intel and AMD Radeon HD M 7650

  I downloaded this driver:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457&SP...

  (SP59143)

  I installed it - it allows me to switch graphics, run the control center catalyst, but if I select high performance graphics gard then many games cannot run. For example: League of legends (graphics must support at least model shader 2.0), Call of duty 4.5 - unknown error directx,...

  In Device Manager, two graphics cards a driver date August 1, 2012 and the version of the driver 8.982.6.0 from AMD.

  I have also tried to install this driver with Win 8 compatibility as administrator and in windows started with don't require no signed drivers and still no luck.

  Hello world

  You may now find the latest AMD driver for your Probook 4540s here:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5229459&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4158%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  I hope that this solves all your problems!

• Can not install the printer driver that nothing works

  I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.

  Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.

  Tom

• Can not install the printer driver. Error code 0 x 0000490.

  I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?

  Moved from Vista to install, upgrade and activate Forum.

  Hi Courtney,

  Please contact the Microsoft Community.

  I'd like you first try printing HP and doctor Scan.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  After that, I would have you to refer to this article-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5241114

  We know if that helps your cause.

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• Satellite Pro L770 - Win 7 x 64 can't install the bluetooth driver

  Hello.

  I did a clean install of Windows 7 x 64.

  I installed the SD driver and wireless driver.
  I tried to install the bluetooth stack...

  It installs the Bluetooth USB Controller-10 TOSHIBA and then located just 25% "installing the driver of Bluetooth." Please wait. ' Only option is to cancel. I can leave it like that for an hour and no change.

  Listed under other devices, I have:
  PCI Simple Communications controller
  SM Bus controller

  I can only assume that these two are related by the bluetooth drivers?

  Please help as I am more frustrated with this...

  Hello

  > PCI Simple Communications Controller
  > SM Bus controller
  > I can only assume that these two are related by the bluetooth drivers?

  SM bus controller could be the card reader so, eventually, you have to install the card reader driver.
  In addition, PCI Simple Communications controller could be controller Intel AMT.
  Download driver for Intel AMT of Toshiba page or page of Intel.

  What cell phone do you have exactly?
  Are you sure that the BT module is available?

• Can I clean the hard drive before installing Windows Dell & as I've heard doesent clean properly. And how to clean the drive of DART?

  Can I clean hard drive before installing Dell Windows 7 / as I have heard it is not clean everything properly. So how to clean the hard drive?

  Or can I restore my office before you install Windows 7 in the first place when it's new?

  Kind regards

  Bert Pooler

  Yes, you can restore the State as it was when new...

  Your computer is equipped with a recovery instead of disk partition...

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery discs...

  After the reset, you should get all the updates from Windows Update EXCEPT for hardware devices. Then, you install a good antivirus. ONLY AFTER you have done this, if you replace the stuff of backups or install anything else.

• Can I change the HARD drive integrated on my Satellite L50-B-281?

  Hello

  is it possible to change the HARD disk integrated in an SSD? Must be a SATA3 SSD?
  Or it is also possible to install an additional HARD/SSD drive? For example the HARD drive now integrated as a data harvester and a SSD as a system drive?
  Or the DVD player can be exchanged for one SSD?

  Greetings!

  HARD drive can be transformed into SSD and it is the best option, but according to user manuals (to the attached picture) your laptop is not separate from the cover of HARD drive in the lower corner so upgrade disk HARD only is not supported for laptop owners and should be done by authorized personnel only.

  To have full access to the disk HARD lower cover must be removed completely, and if you do it on your own it will void the warranty.
  In my opinion, you should contact the nearest Toshiba service provider and ask for help. This can be done quite quickly and I don't think that it would be expensive.

  

• Can I replace the hard drive of my Satellite A100?

  I have a Satellite A100 - 033 PSAANE, running Windows Vista Home Basic Edition. The hard drive is 60 g. I save almost all of my data to an external hard drive, but nevertheless hard drive eventually won't have enough space for the growing number of programs that I have installed various temporary files, etc.. For example, I would like to install VirtualBox and run XP (Ido have a copy), and Linux and perhaps a few other systems operating within it, but that is likely to consume more of hard drive space I have available.

  Anyone know if it is possible to get out of my existing hard drive and replace it with another of higher capacity? Is this possible?

  I need to reinstall Vista on the new disc, from the emergency disk that came with the PC. I don't mind this, but will be Windows Vista "recognized" when I try to install the new hard disk?

  Sorry if these questions seem naïve, but I don't know how to put a new hard drive in a laptop computer, or even if it is possible. I bought the Toshiba in February 2007, which was just after Vista had been released. I had not given the choice of XP: Vista was the only Toshiba operating system provide at this time. I was assured that a 60G hard drive would be perfect for Vista, but I have to tell you that, in my opinion, that I was wrongly advised, and that Toshiba should never have released a 60G machine for use with Vista. Where my wish to have a hard drive with a larger capacity.

  Yes, you can install a larger capacity HARD drive. In my view, the A100 can take any size SATA 2.5 "HDD, so you should be able to successfully install a 250 GB or 320 GB.

  In terms of Windows, you can reinstall using the Toshiba Recovery disk came with the laptop.

  Directions for use:

  Remove the screws from the cover of the HARD drive based on the laptop to access the HARD disk.
  Pull the HARD drive out
  Transfer media cradle of HARD drive to the new HARD disk
  Slide in the new HARD drive and screw the cover of the HARD drive.
  Turn on the laptop and press F12 to access the start menu.
  Insert your recovery disk and choose CD icon to boot from it.
  Follow the prompts to install Windows.
  Connect your original HDD to the A100 using a USB adapter to restore your files/documents.

  PS. Don't forget to back up your important files regularly. HARD drives can fail at any time, since they have delicate moving parts, even when new.

• Can't reformat the hard drive

  Hello I do not know much about computers.  I'm trying to find a way to reformat the hard drive on my son computer for a clean installation of XP Pro.  Initially, XP Pro SP1 has been installed on my IBM Thinkpad.  I have automatic updates must occur on the computer so over time, the service pack has been upgraded to SP3.  The corruption of the computer does not restore system, internet access and several programs running on the device.  When I try to format the hard disk with my XP Pro SP1 disk fails because the system is currently running SP3.  I tried to uninstall SP3, but the system does not.
  What do other options I have order of the reformat the system drive.
   
  Any advice would be greatly appreciated.
   

  Hi Rrmay,

  Thanks for posting. If you try to reinstall XP you can put your OS drive on your computer, or use the OEM recovery media to reinstall XP.

  PERFORMING ONE OF THE FOLLOWING STEPS WILL ERASE ALL DATA IN CUSTODY: PLEASE MAKE SURE THAT YOU HAVE A BACKUP BEFORE CONTINUING.

  The OEM recovery media format the computer and automatically return to the plant as if it was when you first it lit. If you have XP software at retail, you can do the following to format and reinstall.

  Method 1: Perform a clean install of Windows XP, a new installation is to remove all data from your hard disk by repartitioning and reformatting your hard disk and reinstall the operating system and programs empty (clean) hard disk. For more information about important things to consider before you partition and format your hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click on the number below to view the article in the Microsoft Knowledge Base:

  313348 (http://support.microsoft.com/kb/313348/) how to partition and format a hard disk in Windows XP

  To perform a new installation of Windows XP, follow these steps:

  1. Back up all important information before you perform a new installation of Windows XP. Save the backup to an external location, such as a CD or external hard drive.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

     Note To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  3. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.
  4. In the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft software license agreement, and then press F8.
  6. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  7. Follow the instructions on the screen to complete the installation of Windows XP.

  I hope this helps! Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro P100 PSPAHE: How can I replace the HARD drive

  I have not found any documentation about the replacement of the engine on my Satellite Pro 100 PSPAHE.
  How can I physically remove the disk?
  And my Device Manager indicates that the drive is a Fujtsu MHV2200BT PL ATA. What, PL, sounds like parallel - I thought it was a SATA drive.

  Hello

  This laptop was equipped certainly SATA HDD :)
  If you want to upgrade to a larger HARD drive and a SATA HDD is right!

  The slot in the HARD drive seems to be placed at the bottom of the unit near the edge of the laptop.
  To remove the disc HARD turn the computer upside down.
  Loosen the 2 screws and remove the cover of the HARD drive during the liberation of the locks.
  Remove the HARD drive cable connector HARD drive. Be sure to not reach
  damage to the connector. Place the mounting of the HARD drive on a flat surface and remove the 4 screws.
  Then drive HARD is free one may be replaced by a new one.

• Can not find the hard drive on the A200 Satellite during the xp installation

  I have a Satellite A200 (PSAE3E).
  When I try to install Windows XP it prompt can not find any hard disk.
  How can I install win xp?

  Just visit Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. On the download page to choose your laptop model and download Storage Manager.

  Reserved for the installation of Windows XP Home edition to the Please Windows XP Home with Service Pack 2. When facilities procedure starts press F6 button and load the driver SATA (floppy) and the HARD drive will be visible and you will be able to continue the facilities.

  Good luck!

• Satellite 1900-303: can I put the hard drive 120 GB

  I have a S1900-303 and I think to raise the 120 GB hard drive. What are the problems, if any, are that I meet and I can do froom the Toshiba startup disk or do I just install XP from a XP disc?

  Hello

  That I myself remember Satellite 1900-303 has been delivered with the 30 GB HARD drive.
  So, in my opinion, 120 GB HARD drive size is too big and I presume that the BIOS of the laptop will not recognize the HARD drive!

  I think you can use a 40 GB, 60 GB and a 80 GB HARD disk.

  PS: you must search the HARD disk with the IDE (ATA-5) increased!

  Good luck and have a nice day

• Satellite 1805-S253: How can I replace the HARD drive?

  Anyone know where I can find a manual installation to install the new hard drive? Recently bought a new drive hard, but don't can't find how can I change drive.
  TKS.

  Hello

  As far as I know the HARD drive is placed on the right side of the laptop.
  I think it's on the same side where the reader is placed.

  1. turn the computer.
  2. remove the screw of the cover of the HDD location and remove the cover.
  3. remove the screws fixing the HARD drive ASSY.
  4. hold the HARD drive door handle and remove the drive HARD ASSY.
  5. remove the screws that attach the HARD drive.
  6 detach the HARD drive from the HARD drive support.

  That's all