Can I install the vmware tools on a HP Proliant 380 G5 with VMware ESXi 3.5 Installable U3 with HP management components?

Similar Questions

• How can I install the vm-tools for the 'lenny '.

  Sorry for my English...

  I had the problem when I install vm-tools for 'lenny', I can't compiled all the modules, errors about gcc (my version of gcc 4.3, it seems needs 4.1).

  I try to install gcc 4.1, then failure...

  I try to install the machine virtual tools for vmware server 2 for my 'lenny', then I got the same problems.

  VMware-workstation: 6.5.1 (vm-tools 7.x vm - workstation6.5.1, vm-tools 2.0 122956 vm-Server 2)

  host of os: vista 64 (u)

  guest operating system: debian lenny

  Thanks for any information

  Sofar,

  After 12 1 / 2 + hours yesterday, I finally found a solution to install VMWare Tools on Linux myself, and finally got everything working under Ubuntu 8.10 guest OS. Maybe / I hope that this tutorial below will help you.

  For more detailed instructions (step by step) how to get VMWare on Ubuntu 8.10 Guest OS tools, you can consult the following links:

  I created a small tutorial here:

  http://communities.VMware.com/message/1129103#1129103

  A post of Mufasa in this link helped as well:

  http://communities.VMware.com/message/887802#887802

  This link was very helpful as well:

  http://laurentbois.com/2008/04/26/install-Ubuntu-804-using-VMware-Fusion-on-Mac-OS-x/

  The single link that has helped him further was found here on the Ubuntu forums:

  http://UbuntuForums.org/showthread.php?t=987631

  Keep in mind that if you run an x 86 (32-bit) version of Ubuntu 8.10, then the files that you need to download and use are different than the instructions on the Ubuntu forums. So look over the instructions on the Ubuntu forums (if you use a 64 bit version of the guest operating system Ubuntu 8.10), but if you install VMWare Tools on a 32-bit version of the guest operating system Ubuntu and then followed the first link at the top of this post or the link here below:

  http://communities.VMware.com/message/1129103#1129103

  This should be enough to help you (step by step) get the VMWare Tools installed and running on the operating system Ubuntu 8.10 guest (32-bit or 64-bit).

  Mark

  P.S. to the extent where, I hope that you find that the links provided above helps as a solution. Please post back with your results and please allow the "right answer" points to the right solution accordingly. Thank you! (I hope that I could actually get my FIRST 'right answer' all points of a poster, yippie!) Or at least partial marks for a response "useful". Ignore anything. If the links above and the tutorial I created above help resolve your issue/problem, then close the question as answered and assign points. Even the 'useful' and 'good answer' points are good. Thank you!

• can I install the cutting tool in windows xp

  If Yes, where can I find the download?

  If Yes, where can I find the download?

  I use the free version of Super screenshot with my Windows XP, SP3 and I love it.  A downside I found is that it only works on my primary monitor.  If I want to capture something of my second monitor, I firstly drag the window to capture, and then do.  If has a multitude of options, but I only use the rectangle tool to capture part of the screen.  The other drawback is that it inserts www. zealsoft. com (without the spaces) in the upper-left corner of the capture.  Since I use it for a partial screenshot, I just start my rectangle a little higher that what I need so I can trim at the waist without inside advertising.

  What I like is that she not talk or put my screenshots on the internet. I don't know anything about the two Bruce Hagen listed, but I know a called Jing, which is designed to put every screenshot on the net.  That's fine if that's what the user wants, but I prefer to keep my pictures for me.

• Can I install the upgrade to win 8 as a dual boot with Windows 7?

  I bought and downloaded but not installed upgrading Windows 8 Pro, I'm currently under Win 7 64. The upgrade wizard Win gave the choice to install now, install by creating media or install at a later time from your desktop.  I chose the latter, and the Windows Installer shortcut is now on the desktop. I have learned since that a dual-boot Win 8 cannot happen if installed by Windows.

  This upgrade version allows you to dual boot? (I have a few apps that apparently do not run in Win 8)

  It can dualboot (as long as you create the DVD drive with the installation files. But to install the Windows 8 Pro upgrade, the score should have a previous version of qualification of Windows (XP, Vista or Windows 7). The version recommended if you want to dualboot is the full OEM version:

  Buy a full version of Windows 8

  If you want to build your own PC and install Windows 8, Windows 8 Pro or an additional operating system running in a virtual machine or a separate partition (including a Mac), you can buy Windows 8 or Windows 8 Pro System Builder (OEM versions). If available in your country or region, Windows 8 and Windows 8 Pro System Builder products can be purchased at participating stores, you will need to ask a the sales representative for more information. This version does not support the customer.

  There is no full retail version of Windows 8. If you need a full version, you will need to purchase the Pro OEM Windows 8 of new eggs. To do this, install an own custom.

  Windows 8 Pro
  64-bit (OEM)

  Windows 8 Pro
  32-bit (OEM)

  Windows 8
  64-bit (OEM)

  Windows 8
  32-bit (OEM)

  How dual boot Windows Vista/7 and Windows 8

• Can be installed under VMware ESXi 5.0 bash shell?

  Hello

  Can be installed on ESXi 5.0 bash shell?

  In my view, this is impossible.

  ESXi 4.1 and has especially clean interface to command line with specific commands.

  What do you do in bash shell in ESXi?

• I can't install the wireless on Satellite L40-14B

  I can't install the wireless on this laptop. Was bought new with no software on it.
  I tried all the drivers recommended by Toshiba partner site: http://aps2.toshiba-tro.de/wlan/?page=downloads
  Intel PRO/Wireless 2100
  Intel PRO/Wireless 2200/2915
  Intel PRO/Wireless 3945/4965
  Atheros Wireless LAN adapt

  It's the image with the device that is not instaled... the only device... I hope that's not wireless... case is wireless damage?
  http://www.findjobuk.com/wireless/test.jpg

  It is device information:
  USB\VID_0BDA & PID_819 & REV_0200
  USB\VID_0BDA & PID_819

  I don't know what else to do,
  If anyone can help me.

  Thank you

  > Was bought new with no software on it.

  Hmm generally the laptop must be delivered with the software installed together.
  Vista, drivers, tools and utilities must be already installed.

  In addition, you will receive the Toshiba Recovery CD.
  This CD contains the image of Toshiba with OS, drivers and tools.

  However, the driver WLan if works. !!!

  I think you used it just a bad driver WLan.
  The L40 PSL4CE laptop was equipped with the * Realtek RTL8187B WLan card 802.11(b/g) *.

  Search the site Web of Realtek drivers compatible

• Best practices in VMWare ESXi 3.5 installation and deployment of VMDK u3?

  Hi all

  I'm about to implement virtualization on my business technology

  I've got these resources to be used by VMWare ESXi 3.5

  Dell PowerEDGE 2950 III

  • 32 GB DDR - II 667 MHz

  • internal 4 x 500 GB SATA 7200 RPM HDD (RAID 5) - I know that it's slow to host the VMDK

  • Internal USB slot on the motherboard (but not USB flashdisk?)

  Dell PowerVault MD3000

  • 10 x 300 GB SAS 15 k RPM

  • 2 x Dual port Gigabit Ethernet NIC (x 4 in total)

  • iSCSI - 2 x Gigabit Ethernet for the switch (mute not to VLAN)

  I wonder where I should install the VMWare ESXi? for the VMDK, I believe that the deployment in the SAN is the right place.

  and any suggestion for the use of the SATA HARD drive internal?

  any comments would be greatly appreciated.

  Thank you.

  You mean Deployment.jpg diagram?

  In this case, there is an error.

  You need a network 2, not 4.

  Each controller and each NIC (on ESX) must have an IP in a net and another IP in the second NET.

  ESX guests 4 targets, 2 in a net, 2 in the other.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Problems installing the VMware Tools on Server 2008

  Try to install VMware Tools from VMware Infrastructure Client. ESX server is running 3.5.0 143128. The guest operating system is Windows Server 2008 x 64. It was only the error message: a general error - internal error

  It's anywhere that I can manually download the VMware Tools for W2K8?

  The provet at skifte OS Har' and til Vista, install tools og derefter aendre den til Win2008 igen?

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

  Concerning

  A. Mikkelsen

• I can't install the SP3 from Microsoft Update Center

  I can't install the SP3 from Microsoft Update Center.So I contacted Microsoft Support and ran diagnostic scan tool and sent the results. They send e-mail attachment reset_subinacle. It's done. FAILED. I tried 3 times and 2 days later... still cannot copy beethov9.wma. file. So now what should I do to get this SP3 on my son's computer? My son has enough disk space for SP3 and I made sure and prepared for this installation. Does anyone know what I need to do? Help!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  jneen420

  Yes, I'm familiar with your recent discussions on this particular computer as well as the fact that he gave to your son as a used computer. Be so familiar with the history of this computer, I feel confident in saying he was already infected when he gave your son.

  I fear that the only way to get this computer secure and fully patched to Windows Update will be formatting the hard drive - and then do a clean install of Windows.

  Since you don't have the disks that originally came with the computer (and assuming that the original owner would have given them to you when gave you the computer if there were), we must assume (or at least to cross our fingers and hope) that there is a hidden restore partition that could be used to return the computer to the condition it was before first it left the factory. I can assure you that can support Dell & will help you, if not directly through the Dell Community forum:http://en.community.dell.com/support-forums/desktop/f/3514.aspx

  Follow the instructions below:

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before otherwise connect the machine to the internet or one local network (i.e. other computers) and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need extra help (in addition to that provided in the Dell forum), please start a new thread in this forum MS:http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility. Expect to pay about $150 USD (or more) for this service.

  [Yes, times are tight for all of us right now. [You might find a computer local club or a technical school that could do this work for you free of charge.]

  Wish I had better news for you, Jeannine. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't open videos or change with Movie Maker. Is it because I have a Sony Handycam? He said that there is a lack of "codec". Where can I install the missing codec from?

  original title: help with Movie Maker...

  I can't open videos or change with Movie Maker.

  Is it because I have a Sony Handycam?

  He said that there is a lack of "codec". Where can I install the missing codec from?

  Very frustrating because I've used it before - maybe because I have SP3? But I don't want to uninstall SP3... :-(

  Help, please!

  Thank you!!

  Thanks for the info.

  MPEG files are problematic in all versions of Movie Maker.
  Best bet would be to convert the files to the. WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Still for a long time, I can't install the update of security KB2416447 on my Windows XP.

  Still for a long time, I can't install the update of security KB2416447. But because Microsoft NET Framework 1.1 SP1 is missing on my PC, so I try to install Windows XPSP1a express but then I see the error message on the language is different. So I still have a security on my PC. How can he solved?

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  ===============================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• DeskJet 2050 has J510 all series: can not find the box tool

  Hello.

  I can't find the box tool and I tried to install, and then reinstall the program that comes with the writer on a cd. What should I do? In the following program, he says that I can find the box tool it but nowhere to be found. I would like to how much ink I have left, end reinliment the inkcarridge, but at the moment can't do anything. Help, please!

  Thanks for the tip, but it didn't work. Is not where click and I tried to click exactly where you suggested and nothing happened.

  But I solve'd my self by downloading the latest program from Hp:s for my printer model.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I have new laptop with windows 7 Home Basic and can not get the snipping tool?

  I can't find the snipping tool exe anywhere in windows files.

  Where and how do I get it and installed?  TX

  To the best of my knowledge that is not enabled on Home Basic.

• Install the glassfish tools in Luna M7

  Hi all

  I installed Eclipse last milestone of Luna and tried to install glassfish for eclipse tools, but it failed due to a "missing dependency '.

  > Can not complete the installation because one or more required elements could not be found.

  Software: GlassFish tools 6.5.0.201405081811 (oracle.eclipse.tools.glassfish.feature.group 6.5.0.201405081811)

  Lack of requirement: GlassFish tools 6.5.0.201405081811 (oracle.eclipse.tools.glassfish 6.5.0.201405081811) requires ' bundle org.apache.ant [1.8.4,1.9.0)', but it is not found]

  Cannot satisfy the dependency:

  From: GlassFish tools 6.5.0.201405081811 (oracle.eclipse.tools.glassfish.feature.group 6.5.0.201405081811)

  In: oracle.eclipse.tools.glassfish [6.5.0.201405081811]

  Asked to eclipse here: Forums Community Eclipse: Web Tools Project (WTP) & amp; raquo; can not install the latest glassfish on luna m7 tools
  

  Apparently the problem is that Luna comes with ant 1.9.2

  No work around? Any plans for an update?

  Thank you

  You reference repository of Kepler installation in Luna. You must use the following URL instead:

  http://download.Oracle.com/otn_software/EPCO/luna /.