Can I remove the cover of HDMI port?

Similar Questions

• How can I remove the cover for the printing of books

  Hello

  I just bought a 5510e Photosmart aio, B111a. It says in the manual that it is possible to print or scan books by unscrewing the lid. But how do you go? Seems I have to resort to violence!

  Hello I am

  I rechecked everything on the device. As in the image, press the left side of the back cover with your thumb. The lid should unclip. The first time the cover can be a little stubborn. After that the left side is out you can push the cover to remove the cover on the right side.

• How can I remove the cover of my Photosmart HP 5510 printer

  I am told that the printer cover comes off.  I tried everything, except her tearing.  Can you explain it to me.

  Hi DickTurner,

  Sorry to hear the call of support did not help to resolve this problem. The lid should break pretty easily. Please refer to the screenshot below. I hope this helps you remove the scanner cover.

  

• How can I remove the cover protectsmart to change a hard drive damaged in a HP Pavilion dv5-2132dx?

  I have a HP Pavilion dv5-2132dx laptop. The hard drive has completely failed and needs to be replaced, but I can't understand how to access the hard drive. There is no screws on the Panel, and he said HP Protectsmart on the back. I need a video on how to do it.

  Hello

  The following guide will show you how (#59 page):

  http://h10032.www1.HP.com/CTG/manual/c02666786.PDF

  Several manuals for your machine are available on the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & LC = in & Product = 4317216

  Kind regards.

• I can't remove the port that my printer is listed on stop, file print

  I can't remove the port that my printer is listed when I get the message "print to file" requiring an output file Name.The message when I try to uncheck it's that the requested resource is in use. How can I proceed?

  This departure!

  http://www.Vistax64.com/Vista-General/132646-requested-resource-use.html

• Studio XPS 8100 - how to remove the cover of the modular Bay?

  I would remove the plastic cover of the modular Bay on the front of my venerable Studio XPS 8100 so I can install a USB 3.0 3.5 inch hub instead. However, I can't find instructions for it. In fact, I can't find any description of how to use the modular Bay.

  To start: how to remove the cover plastic modular Bay?

  Also: If someone has found the instructions on how to insert a player or another device in the modular Bay, I would be glad to know where I can find them.

  Hello rdunnil

  I took off the glasses and I saw how the metal plate is attached. Applying light pressure with a screwdriver flat head will do the job. Exchange on USB 2.0 ports would also work: I found directions for the removed from their metal case. Whatever it is, I'm all set. Thank you for pushing me in the right direction. It is much more valuable than the useless, generic link you gave me.

• What screwdriver to remove the cover from the fan on satellite p10

  I'm lost as to what driver I need to remove the cover around the fan and the heat sink, my 10 p heating is now all the time and im hoping its because dust and dirt that has been vacuumed during the last year and a half, the screws, I open are a real star shaped screws not star philips normal like the rest of the screws on the unit, I hope that someone here can point me in the right direction as to where I can get one of these scredrivers... Thank you

  Hello

  Sorry, but your question is a bit ridiculous to me. Until you wait for a response from Google around or ask in some store Kit tools.

  My last laptop was Satellite P20. It's a bit larger similar unit but with the same screws. It is not recommended to use screwdrivers not original but I did. Please don t that, because of screw causing damage.

  Good bye

• Remove the cover of my MacBook Pro, I saw a black residue under places of my Fans. What is it?

  I just removed the cover of my 17 "mid 2010 MacBook Pro to replace the hard drive!  I see that black dust has settled under the two locations of cooling fans, on the cover.

  It seems to be a micro-fine DUST, color dark Siver.

  1. Is it debri met fans?
  2. Can I use a Microfiber cloth to remove safely? and
  3. How it is there?

  Please check, as I don't know if it's to worry about.

  Is it debri met fans?

  Yes

  Can I use a Microfiber cloth to remove safely?

  For text detailed and video instructions on how to clean the fans, visit You Tube and iFixit tutorial.

  • How it is there?

    Dirt can also get inside a computer because it has vents.  Fans can also attract the dust bunnies inside the computer where most settle on fans.  To answer your question - air and the environment around your computer.

  

• Satellite A60-106: How can I remove the old CD/DVD player

  Hello
  I have a Satellite SA60-106 and want to date my DVD/RW X 1 on a 8 X DVD/RW.
  How can I remove the old DVD to replace with a new one.

  Please help if you can email [email protected]

  Hi, Malcolm

  For this model of laptop, it is quite complicated because the STRANGE is from both sides. First you must remove the small screw placed in the Middle near the coverage of memory in the lower corner of your laptop (also near the cooling rack). The STRANGE is also secured with small hook placed under the keyboard.

  At the right place of this small hook is not known but I know that it is placed somewhere under the keyboard. I don't really know what you need to do. Have you already tried to remove the keyboard?

  I have to be honest and it's not so easy to give instructions here because I don't know if you're familiar with the disassembly. I don't want damage you something on your laptop. Small error can ends with a broken plastic cover. Please be careful.

• Remove the cover desktop (Acer AM3970)

  Maybe a stupid question, but it comes to remove the cover.  I removed all the screws that hold it and I can't move it.  I don't want to pry and bend the case that makes anyone who has an idea of how I can remove this cover

  Hello janlarmil,

  1. You remove the screws (x 2) in the upward motion
  2. You slide the Panel towards the rear of the chassis (press with your hands and slide back)
  3. That's all!

• HOW TO REMOVE THE COVER FROM THE PAVILION 21.

  I watched the tutorial to remove the lid of the HP Pavilion 21 and indications are not applicable to my unit.  This is a lock down at the bottom of the unit once the screws are properly loosen, there is no lock.  I see a labeled hole lock but by placing a flathead screwdriver in the hole has not yet authorized the cover be released.  How do I release the lid without damage to it?

  Hello Austex,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you try to remove the cover of your HP Pavilion 2 and have problems with it. I'd be happy to help you, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. Because with that I can give you accurate information.

  How can I find my model number or product number?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks

  How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks

  Hello Michael,

  Welcome to Apple Support communities.

  I see that you need assistance, removal of GarageBand ringtones that were uninstalled. I know it's nice to be able to properly manage your tones. I can help you with this.

  Use the article for iOS (iPad) 2.0.x GarageBand: GarageBand share songs, more precisely, this section:

  To remove the existing ringtones follow these steps:

  • Press to select, then press the button Delete for any ringtone you want to delete.

  • Drag a ringtone in the list, and then press delete.

  Have a great day!

• How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal.

  How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal. I am a novice. Thank you very much.

  1. Please select from the menu bar Terminal

  ▹ terminal preferences... ▹ Profiles ▹ Shell

  If the run command box is checked, uncheck it or enter the command to run automatically (if any), each opening of a Terminal window. Note: this is not how you define a default shell.

  2. If step 1 does not resolve the problem, see below.

  Back up all data.

  Select

  New Shell command ▹

  in the Terminal menu bar. Uncheck the box marked

  Run the command inside a shell

  If it is enabled.

  Copy and paste the following line into the text box that appears, and then press return:

  /bin/mkdir disabled_shell_files

  Close the Terminal window that opens. Repeat with this line:

  /bin/mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files

  History Shell and former initialization files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It is normal that some of these files do not exist, and therefore, you will get error "no file".

  Close the window and open a new test.

  You may already know that files with name starting in '. ' are not visible in the Finder by default. So, if you open the folder that you created in the Finder, it will appear as empty, even if it is not. If you need to recover a portion of the data in the files of the shell, use a shell such as nano-based text editor (1). Make sure that you're not recreating the problem. Otherwise, you can delete the folder.

• How can I remove the button from menu? The custom option doesn't seem to work for this.

  How can I remove the button from menu? [This IChing looking for three line on the toolbar icon].

  The tool bar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I would trade on the NoScript icon.

  Hi, I can not recommend that you do, but if you are really determined, this article can help.