Remove the cover desktop (Acer AM3970)

Similar Questions

• What screwdriver to remove the cover from the fan on satellite p10

  I'm lost as to what driver I need to remove the cover around the fan and the heat sink, my 10 p heating is now all the time and im hoping its because dust and dirt that has been vacuumed during the last year and a half, the screws, I open are a real star shaped screws not star philips normal like the rest of the screws on the unit, I hope that someone here can point me in the right direction as to where I can get one of these scredrivers... Thank you

  Hello

  Sorry, but your question is a bit ridiculous to me. Until you wait for a response from Google around or ask in some store Kit tools.

  My last laptop was Satellite P20. It's a bit larger similar unit but with the same screws. It is not recommended to use screwdrivers not original but I did. Please don t that, because of screw causing damage.

  Good bye

• How can I remove the cover for the printing of books

  Hello

  I just bought a 5510e Photosmart aio, B111a. It says in the manual that it is possible to print or scan books by unscrewing the lid. But how do you go? Seems I have to resort to violence!

  Hello I am

  I rechecked everything on the device. As in the image, press the left side of the back cover with your thumb. The lid should unclip. The first time the cover can be a little stubborn. After that the left side is out you can push the cover to remove the cover on the right side.

• Remove the cover of my MacBook Pro, I saw a black residue under places of my Fans. What is it?

  I just removed the cover of my 17 "mid 2010 MacBook Pro to replace the hard drive!  I see that black dust has settled under the two locations of cooling fans, on the cover.

  It seems to be a micro-fine DUST, color dark Siver.

  1. Is it debri met fans?
  2. Can I use a Microfiber cloth to remove safely? and
  3. How it is there?

  Please check, as I don't know if it's to worry about.

  Is it debri met fans?

  Yes

  Can I use a Microfiber cloth to remove safely?

  For text detailed and video instructions on how to clean the fans, visit You Tube and iFixit tutorial.

  • How it is there?

    Dirt can also get inside a computer because it has vents.  Fans can also attract the dust bunnies inside the computer where most settle on fans.  To answer your question - air and the environment around your computer.

  

• HOW TO REMOVE THE COVER FROM THE PAVILION 21.

  I watched the tutorial to remove the lid of the HP Pavilion 21 and indications are not applicable to my unit.  This is a lock down at the bottom of the unit once the screws are properly loosen, there is no lock.  I see a labeled hole lock but by placing a flathead screwdriver in the hole has not yet authorized the cover be released.  How do I release the lid without damage to it?

  Hello Austex,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you try to remove the cover of your HP Pavilion 2 and have problems with it. I'd be happy to help you, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. Because with that I can give you accurate information.

  How can I find my model number or product number?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• Studio XPS 8100 - how to remove the cover of the modular Bay?

  I would remove the plastic cover of the modular Bay on the front of my venerable Studio XPS 8100 so I can install a USB 3.0 3.5 inch hub instead. However, I can't find instructions for it. In fact, I can't find any description of how to use the modular Bay.

  To start: how to remove the cover plastic modular Bay?

  Also: If someone has found the instructions on how to insert a player or another device in the modular Bay, I would be glad to know where I can find them.

  Hello rdunnil

  I took off the glasses and I saw how the metal plate is attached. Applying light pressure with a screwdriver flat head will do the job. Exchange on USB 2.0 ports would also work: I found directions for the removed from their metal case. Whatever it is, I'm all set. Thank you for pushing me in the right direction. It is much more valuable than the useless, generic link you gave me.

• Remove the cover on all in one office

  I have a desktop HP all-in-one view 20. I can't get the back cover off to add ram. I have the 2 screws and the cover rises about 1/4 ", then that's it. I noticed a small hole in the lid that has a "lock" symbol Is there a tool to unlock the back cover?

  Thank you. It does not help. You own a HP ENVY 20 - d117c TouchSmart all-in-One desktop PC.

  As you loosen the two screws, turn each him until you hear a click five times. This means that they are completely loose.

  From the edge of the lid near the base, lift the back cover upwards and remove it.

  There is a video that I watched to see how it does, but it is a place that I can't provide you with a link to access.

  Best regards
  ERICO

• How do I remove the cover upper dv3505

  I need to replace the rtc battery in my DV3505. I followed the instructions of the interview guide and got to the point of p60 to remove the top cover where it is said:

  It takes a bit of gentle persuasion. A fingernail or a plastic spatula between the hood and the lip of pregnant even better base, must turn it on. Once it moves it Peel like a zipper.

• How can I remove the cover of my Photosmart HP 5510 printer

  I am told that the printer cover comes off.  I tried everything, except her tearing.  Can you explain it to me.

  Hi DickTurner,

  Sorry to hear the call of support did not help to resolve this problem. The lid should break pretty easily. Please refer to the screenshot below. I hope this helps you remove the scanner cover.

  

• Event ID: 637 is not triggered after you remove the remote desktop user

  Hello

  Suddenly, three of the users to the remote desktop users group has been removed, but I'm not able to find the event: 637 in the security event log.  However, I got a test to remove a user from the remote desktop users group, but the event id: 637 has triggered and found.

  I need to check what the user has been deleted?

  Thank you
  Yasser

  Hi Yasir,

  Thanks for keeping us posted and share this information with us.

  I would have you post your query in the TechNet Forums.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Pro book G2: remove the cover of the HP Pro Book DVD

  How can I detach front of my DVD? The numbers on the DVD are:

  * model: GUB0N

  * fw: UB00

  * HW: B

  * type: AMCK702

  I need this group to tie it to caddy for second hard drive.

  A youtube is worth a thousand words.

  https://www.YouTube.com/watch?v=21PmIDbz_go

  Use the pin hole to open the drawer and then get clips plastic that you can push down and under the hook and remove the bezel.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to remove the laptop battery Acer Aspire E - 15

  There is no lock on the new laptop Acer Aspire E-15.

  How the hell is the battery?

  Is this one like yours? If this isn't the case, give me the full model number.

  https://www.YouTube.com/watch?v=-_XeJ9bGzYA

• How to remove the cover of the expansion Bay/PCI-e?

  Hello.

  I'm sorry, I really need to be delayed in some way, shape, because no matter how hard I try I can't remove the metal for the PCI-e slot. I tried to bend the tab that holds it on, it won't bend. Perfect. It is remarkably frusterating.  Can anyone give me a detailed on how to remove this instruction * bleep * thing, or better yet, does anyone have a picture or a video? It cannot be if difficult, but the tab will not simply fold and it's the only thing that keeps me from installing my new graphics card.

  The office in question is a HP a6724c.

  Message edited by WtfMate 08/17/2009 12:58

  I think it shows you here... Manual for your pc

  http://h10032.www1.HP.com/CTG/manual/c00841410.PDF

• Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

  Hi all

  I have a Satellite L70-A-139 youcef.
  And at the back of the laptop, there is a cover that is fixed with a screw.

  Wil I void the warranty when I unscrew and take a look?
  I want to upgrade my HDD to SSD.
  The motherboard supports Sata III: D.

  Thank you!

  No, the mandate must still be valid.
  There is a removable cover at the bottom of the unit as shown here:
  [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

  Then you should be able to upgrade the RAM and HARD drive.
  I think this info should be mentioned in the user manual too.

• Can I remove the cover of HDMI port?

  I want to connect my laptop to my new tv, but the hdmi port seems to be covered by a plastic cover. If possible, how can I remove it? Help, please!

  It was a doorbuster of Wal-Mart a couple Black Friday there is and does not have a HDMI, like some other G71s port.