Can I replace reminder in the process template engine?

Similar Questions

• I am trying to transfer the license from a Dreamweaver CS3 Macintosh product. A transfer of license form signed by the person who gave it to me. Can someone help me complete the process?

  I am trying to transfer the license from a Dreamweaver CS3 Macintosh product. A transfer of license form signed by the person who gave it to me. Can someone help me complete the process as cat Adobe say they are unable to help? I was told that the forum is reviewed by a team of experts. Anyone here? Thank you

  Did you follow your form as well?  A form must be completed and signed by both parties and submitted to the Adobe support via a support ticket. Chat support can't help, but should you indicated in section with the instructions.

  Transfer an Adobe product license

• Can someone explain to me the process of backup template?

  I do not understand the process of any model.  I understand the point of templates and want to use one.  However, I understand that after I choose the one I then may make changes to the text but to save it to a page it tells me that there is no editable region.  (It's the kind of thing that kept me going on my Front Page 2000 for 13 years and DW to avoid like the plague, it's not intuitive).  I don't understand this.  I got the point of the editable regions, I think, so you can have several people working on a site and can change some areas.  When I save it when even it saves it as a template.  WTF?  How to use the model have all editable regions, like I'm the only one will be updated the site and save it as PAGE.  It's great as a model too, but I need the page first (clearly I'm just getting started and want to save save for later models).  More it won't let me change the colors inside the model, how can I do this?  I tried the page properties, but it leaves me only to change colors of background aside?  Why can't I have just right-click in the outline box and choose a Properties menu for just this box?  Is it too easy and that's why they won't let you?  I really have to click all regions and select make editable?

  Models should make it easier not harder.

  Thank you

  When we talk about Dreamweaver templates, the terminology is very important. In DW, models are a very specific thing. They are not only "a template page stays are based on" where you can use Save under and change the file type to make duplicates. They have specific features that can be very useful if used correctly.

  Your model is a special .dwt (DreamWeaver template) type file that uses only DW (they are not used by your server, the folder Templates and .dwt do not need to be downloaded). You create the page, essentially as usual, but affect you any region you intend to have "specific content of the page" in an editable region. The rest of the design that remains the same on every page, is left outside of these editable regions. You save the .dwt file in a DW created the Templates folder (where it should be or will be break features below).

  Therefore, you choose file > new > template Page to create a child page based on this template. As mentioned brégent, your editable in the .dwt file regions are where you place the specific content of the page on the pages of your child. You will not be allowed to change anything that doesn't fit into the editable regions in a page of the child, it is the design and the results expected.

  Now, once you have several pages of children created in this way, or the whole site for that matter, if you make a change to the original model .dwt file (as long as it is not in an editable region), that change then spread in all of your pages based on this template automatically.

• If my iPhone is brick, can I replace it with the apple warranty?

  I'm still under warranty of one year of iPhone. If my iPhone gets bricked can I replace? There is no jailbreaking or other malicious activities. Also I was jailbroken in the past, I'm not now of course, but they can follow the which?

  Thank you.

  Is it has been jailbroken, then they will not help you.

  Sorry

• You can help me to get the process ID so I can install updates? I am locked out and have tried to change password and opening new account, but it won't let me past the security or open a new account, because I told that I already have a. New password will

  I can't get through the process ID or change password or by opening a new account. I have only 1 e-mail address. How can I get an account that works?

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  If you are still puzzled, you may need to reset the password on your Mac:

  http://support.Apple.com/kb/PH18653

  http://support.Apple.com/kb/PH14325

  http://support.Apple.com/en-us/HT201240

• How can you replace 'Row' in the paging and the text of the error?

  Have developed by their Summit for a while, I just joined this forum today. I use Apex 4.2 and I want to know how to change the references to 'row' in these circumstances:

  (1) the text of pagination i.e. rows 1-30 of...

  (2) error in a table that is, enter a value for name (line 2)

  Call a record row is a little geeky and very well for people of origins RDBMS, but for client applications, especially those used by the public, row is at best a confusing term for them. This is especially true if customers read using the alternative interpretation of the word 'row', in other words an argument.

  Is there a way to replace to say something like ' bills 1-30 of...» "and enter a value for the name (2 products)'?

  Hello

  answer late bit then maybe you have already found a way.

  I checked and found that my solution seems to work for all languages but English... Sorry about that.

  For the English text, it does not seem possible to translate/replace text using the standard method, I wasn't aware of this.

  What you could do, it is to assign a different language to the application and assign some strings translate you this language (so although it is English just set it to Dutch and set the language of the app in Dutch). Text for which no translation is made must remain in English (which seems to be the default).

  I don't think that there is nothing wrong with the definition of the application in another language such as Dutch in Danish... not sure, but since I have not tried this for a complete application. Another localization parameters can be defined separately if necessary so I think this should work if necessary for you.

  See you soon

  Bottom

• Can someone help me understand the process Instance recovery

  First thanks for all of you who responded to my post, any help is really appreciated.
  
  I would like to more deeply understand the Instance recovery process then the Administration Guide of Oracle Docs can tell me.
  
  What I have so far of Instance recovery is:
  
  1 oracle determines which files are not synchronized.
  2. all data from redo log files is applied to restore log buffers by progression. Buffers do not participate on the database of normal transactions because they are marked to pick it up.
  All these data are applied to the data files (commited and contains transactions).
  This step is called roll forward.
  3 cancellation are used to restore transaction no. After this step the datafiles not aura no data contains on them. At this point, the instance is available for users, but the blocks used are not.
  4. all files are now in sync.
  
  My questions are:
  
  -Step 1, what process determines which files are not sync? Make the bed of Smon the controlfile and data file headers and then make a list which is not sync?
  
  -L' step 2, what is the process that reads the information in the redo log files and complete the recovery log buffer? What is the CKPT? And how he is warned that he might start to read the files after completing step 1? There is a semaphore that is defined for it?
  
  -Step 2, which process applies information engaged and contains buffer redo log for the data files? When it starts to apply this information of the instance is already partially available to users?
  
  -Step 3, what is the process that reads up to cancel to restore transactions not? This process must be done once step 2 is complete as could be blocks of the undo tablespace on buffers of the right-wing newspaper do it again? And when this step 3 starts, the process is triggered by an another semaphore?
  
  -When step 3 is finished, what process changes the State of the database of partially open to open, or that's just what we call it when the database has always revenge marked for recovery?
  
  Thanks again in advance for the help, there are reasons not practice known this information, I'm just a curious person who could not find this information on the google...
  
  
  Ricardo Rodriguez

  Ricardo,
  Well, I'll take a chance to respond.
  (1) SMON in the start-up phase, in the strict sense in the editing phase, compares the SNA stored in the control file with the data file headers. This sCN is called checkpoint SCN. It is always higher among the controlfile so its part of the same database and is not set up to an old backup. By this correspondence, Oralce comes to know that there are some report files with their SNA control point is only not with the controlfile and consequently, instance recovery is reported. Here is the list of files is prepared.
  (2) the same process SMON only would trigger playback of the redo log files and launch the Rollforward process. Roll forward is made from the last address bytes redo controlled at the end of the restore log forward. This means that the last block, blocks have not reported in the data file are simply read and are dumped on the data files. As a result, we get a situation that the data file will end up with a lot of data committed but also committed that redo is containing both.
  CKPT process will not come in the picture I think. Where did you read what CKPT would do all this?
  (3) SMON governs all this thing is to say the application of the data for the data files. No, in this phase, we are still in the phase of mounting that this recovery is called crash recovery. Oracle wouldn't let users to use the database at this point. Data is still not available for them.
  (4) do not bring semaphores here. They are already in use when you allocated the memory of your instnace. Its work process level. After the mount phase is completed, oracle would open up the db. At this stage, "the transaction recovery" aka rear roller phase. That would be launched to relax all the operations that are not validated.
  Now to do this, undo will be used. Oracle launches this phase into two or more strictly speaking 3 ways. One, SMON would just check how many blocks will be there for the recovery. If they are larger, it would begin the rear roller with parallel slaves. This is called "we demand" rollback. It is initiated by the user. So if you were using the EMP table data and the server crashed between, now the next time you start, if you try to access the same blocks once again, they are set aside on the basis of priority.
  The third one will rollback transaction intra. It's basically splitting the work among the slaves so that if a slave is sitting free, it can share the work and can move forward to make things more quickly restored.
  Please note that all this is happening at the open stage. This means then that this is the case, oracle is available for users. And second, there is little change in this process (an integer) 9i go. This is called two-pass recovery which has been made to make this process a little faster. In this regard, SMON ignores these blocks that are controlled by DBWR during execution of the phase of rollforward.
  Hope this makes some sense and helps. Let me know if there is something wrong or unclear.
  HTH
  Aman...

• Disable tracking in the process template

  Hello!

  I use a custom c# user interface to open a movie file and execution. When executing a sequence file, is followed by execution in steps of process model. It's only for the first time. For subsequent executions, followed by the process model is not displayed. Could you please help me how to disable tracing in the sequences of process model & steps. Thank you.

  Thank you & best regards

  SGY

  Hello!

  It worked. Keep the StepGroupMode of the requeteexecution with the default manager.

  Concerning

  SGY

• Can someone guide me in the process of wrapping text around an object. I'm missing something here

  I have a circle and I want to distort the text around the top and then some different around from the bottom. I can't understand how to do this. Can someone guide me through the steps please?

  Thanks Beth

  I have a feeling that you don't mean dressing. I think that you probably want to text on a path, with a path on top and the other on the bottom. As on a label where the type of curve in the upper part of a circle, and another trail meanders around the base.

  Is this fair?

• How can I replace a range / the text in an XML tag

  I want to replace a piece of text in an XML tag in a text frame.

  In my input parameters, I have the In-design page number, UID text frame in this page and the name of the XML tag within this block of text

  that surrounds my old text.

  which interface/function/command can I use who can help me to replace the existing text with the input text?

  for example:

  [old text] --> [new text]

  where [] is the XML tag with the name tag1.

  After a few trails and POC, I was able to write the piece of code below.

  It detects the start and end position of the marker and based on that we can replace the text inside. It will be useful.

  InterfacePtr data (signalMgr, UseDefaultIID());

  If (data == nil)

  {

  break;

  }

  UIDRef docRef = data-> GetDocument();

  InterfacePtr doc (docRef, IID_IDOCUMENT);

  IDataBase * db = docRef.GetDataBase ();

  Get the spread

  InterfacePtr spreadList (doc, UseDefaultIID());

  Int32 spreadCount is spreadList-> GetSpreadCount();.

  for (int32 spreadIndex = 0; spreadIndex)< spreadcount;="" spreadindex++="">

  {

  Get the reference to the spread

  UIDRef spreadUIDRef (db, spreadList-> GetNthSpreadUID (spreadIndex));

  Get the object of dissemination

  InterfacePtr spread (spreadUIDRef, UseDefaultIID());

  Int32 numberOfPages = spread-> GetNumPages();

  for (int32 nPage = 0; nPage)< numberofpages;="" npage++="">

  {

  UIDList pageItemList (db);

  spread-> GetItemsOnPage (nPage, & pageItemList, kFalse, kFalse);

  Browse page items and save on the UID of executives.

  Int32 pageItemListLength = pageItemList.Length ();

  for (int32 j = 0; j)< pageitemlistlength;="" j++="">

  {

  UIDRef pageItemRef = pageItemList.GetRef (j);

  InterfacePtr frame (pageItemRef, UseDefaultIID());

  If (frame-> IsTextFrame())

  {

  Now try to get the position of the Guide to the XML tag

  TextIndex 0 = startPos, endPos = 0;

  IXMLReferenceData * xmlReferenceData = Utils()-> QueryXMLReferenceData (pageItemRef);

  REF XMLReference = xmlReferenceData-> GetReference();

  IIDXMLElement * element = REF. Instantiate();

  InterfacePtr (REF.). Instantiate());

  TagUID UID = element-> GetTagUID();

  WideString elementName = element-> GetTagString();

  for (int32 i = 0; i < element-=""> GetChildCount(); i ++)

  {

  ChildRef = element XMLReference-> GetNthChild (i);

  InterfacePtr child_element (childRef.Instantiate ());

  tagUID = child_element-> GetTagUID();

  elementName = child_element-> GetTagString();

  Int32 index = 0;

  Utils()-> GetElementMarkerPositions (child_element, & startPos and endPos);

  startPos += 1; to proceed exclude the starting tag

  }

  }

  }

  } / / Browse pages spread

  }

• Can we replace AR of the instance to the instance of training development?

  Hi all
  
  We must replace module AR of the instance to the instance of training development, we can do the same thing or should clone any instance for the same?
  
  If possible please provide the steps to solve.
  
  Thanks in advance,

  We can do the same thing or should clone any instance for the same?
  AFAIK, you must make the clone, which is safe and best practices.

  Thank you

  Kind regards
  Taj

• How can I get rid of the 'Process of preparation of the content' popup everytime I open a document?

  Every time I open a document, I see this popup.  How can I make them disappear?

  

  Hey sidgey1981,

  Please post on the Adobe forums.

  Go on "Edition > Preferences > reading" and select "Only read the currently visible pages" under "screen reader Options.

  Let me know how it goes.

  Kind regards

  Ana Maria

• How can I add time to the process of starting to slow down a host to start?

  I have a problem with some boxes where the external storage device takes some time to complete the rotation upward all the readers and the host of complete starting before that the storage device only.  So the vm out there are not accessible unless I restart the host.  In Windows, you can add start menu time to stop the BONE to get through his post.  How do I Linux to accomplish the same thing?

  -Pete

  Edit the file/etc/grub.conf.

  By default, there is this line:

  Timeout = 10

  André

• How can I replace or modify the colors in this image, to preserve transparency (resulting in different colors, where the colors meet)?

  

  It is a series of using channels to make choices and requires that each color you want to select a slightly different way to select colors. for example, to select, I illustrate how to get red of this image:

  I just realized that you don't have turn off the layers.

  

  Cmd/Ctrl-clicking on the icon of the Green chain to get this catalog it will be reversed of what you want, but don't worry about this now.

  

  CTRL/cmd-shift click on the blue channel:

  

  At this point, press ctrl/cmd-shift-i to invert the selection. Ctrl/cmd-alt/opt-SHIFT-click the icon of the red chanel will:

  You now have a selection of just the Red areas. Make new layer and who fill it with the color you want. Do this for all the other colors you want to isolate. you have to play to see what combinations of selections will work with each.

  

• Despite following the instructions of the program, I can't get rid of the Startmysearch search engine. Help, please.

  I start my search early as soon as I open Firefox. I ran malwarebytes to get rid of unwanted programs and this erased this bar particularly annoying to start in all browsers except Firefox (the browser I use more!). I have reset MSN as my home page and set my home page to open when I run Firefox. Guess what? When I open Firefox, start my search opens! MSN is always my page host, but despite following all the instructions to start my search, I can't get rid of it. Can someone help please!

  Hi, please try for this article, and this article. I hope that you can get rid of it!